|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
Dalmec offer a wide range of equipment for the “weightless” handling of sheets, various panels, panels of glass etc.
Simple to use, they allow the operator to move the sheets around quickly, accurately and safely.
These manipulators are custom-built and the type, design, dimensions and picking system used is specially adapted to suit the specific requirements of the user and the various environmental conditions available.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
Dalmec offers a range of tooling heads for the “weightless” handling of containers.Simple to use, they allow the operator to move the containers quickly, accurately and safely throughout the working area.
These manipulators have been custom-built, with specially adapted design, dimensions and picking systems to suit the specific requirements of the users and the various environmental conditions available.
|
|
|
Manipulating ATISmirus 100 with tool to ventose for the movimentazione of scato them in cardboard. The job cycle previews the disattivazione of the parking brakes acting on the appropriate selector. The tool to ventose comes posizionato from the operator on the product to enliven place on the packing emplacement the taken operation of of the product comes executed from the operator acting on the appropriate push-button of taken predisposed on the tool. Caught up a prestabilito value of empty that it assures abundant emergency, the insertion will be had automatic rifle of the balance to cargo. The operator can enliven therefore the cargo easily acting directly on the grip or the product. The release of the product on pallet is obtained pressing the two push-buttons at the same time affixed to you with consequent restoration in automatic rifle of the balance to empty.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
Pneumatic arm manipulators for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 600 kg
Max work radius 3,7 m
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Rails systems, complete with metal supporting frame, delivered as a turn key project
|
|
The ATISacer manipulators, endowed with a rope guided vertical movement unit, allows the handling of loads in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific needs. They are equipped with movement units, necessary to the movement cycle, which can be manual or by means of pneumatic components.
The rope-guided ATISacer manipulators are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, overhead or sliding on overhead runway tracks.
The implant which regulates the functioning of the manipulator is powered only by the air in the network.
|
|
|
|
|
|
Brief description
The most advanced cable balancer is the Flexi-heffer. Useful for applications where loads can be lifted using a cable and/or can be handled flexibly or free-suspended. Ideal especially to the highly desirable added value generated by its user-friendliness and ergonomics. (For technical specifications: see table below)
Unique principle: ergonomic thanks to idle flexible arms
There is no other handling system with the same major advantage in day-to-day use as the BPL Flexi-heffer. What is unique are the idle flexible arms e.g there is no hoist drive inside or attached to the arms. The arms that carry the load are moved by the operator from ‘A’ to ‘B’. Movements, in particular horizontal, are extremely light because of the idle and flexible arms and the hoist drive which is mounted in the static column. Summarized the technology is sophisticated and yet surprisingly simple.
Speed and self-balancing: the second advantage
The idle arms allow easy manual movements in horizontal directions. Vertical movements are also very quickly. The Flexi-heffer is available for many years with the BPL control unit for self-balancing. This means that a series of different loads can be handled successively without the need for any weight adjustments. At the same time the vertical movements can be operated with the touch of a finger with acceleration and deceleration.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pivot arm KSL-L/-M
Pivot arms type KSL-medium and KSL-light are combined with Demag rope balancers or Demag SpeedHoists which are fitted above the pillar. Therefore, they offer the operator highly convenient, smooth and flexible load handling, as only the relatively low dead weight of the arm has to be moved.
They are available with load capacities of up to 160 kg and, depending on the design, an outreach of up to 5,000 mm.
|
|
The Freestanding Easy Arm™ requires no special foundation for installation and puts no stress on your building's overhead structure. This all-in-one design is more cost effective for moving loads within one work cell than adding a work station bridge crane.
- Easy to install and relocate: Its simple 4-bolt pattern makes it easy to install on any 6" reinforced concrete floor
- Easy to move: The lifting mechanisms are located over the primary pivot point, making the arm lightweight
|
|
| ... products without technical information |
| |
Lifting technology
Handy telescope model
• stabilized movement of loads
• precise positioning of the loads
• lifting of eccentric loads: no problem
• suspension attachment to suit custom built hoisting accessories
|
|
Telescopic lifting devices are lifted and lowered by inside or outside running chains of electrically driven Demag chain hoists. They are available with two different design principles. Either with square masts as square section telescoping units (TV) or with round masts as round section telescoping units (TR). Both variants are available with single telescoping sections as well as double telescoping sections.
Telescoping units are particularly suitable for handling heavy workpieces up to 1,000 kg and they can take up large moments of up to 1,500 Nm. Depending on the design, strokes of up to max. 2,000 mm are possible.
They can either be fitted in a Demag KBK rail system or on a KSL pivot arm with pillar mounted on the floor.
They can also be used in low buildings with double telescoping sections.
|
|
|
|
