|
|
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
Using the Varian 710/715-ES ICP optical emission spectrometer with our new ICP Expert™ II software (version 1.1.3), you can:
Perform analyses up to 50% quicker, to boost your laboratory's productivity.
Achieve better detection limits without any time penalties.
Save on argon and power costs, and extend the life of your consumables.
Version 1.1.3 of ICP Expert II software features high-efficiency signal processing, enabling you to accomplish even more with Varian 710/715-ES spectrometers. As shown in the table below, sample analysis times are improved by up to 56% using the new software. Combine this with new hardware and accessory options to further enhance productivity and improve day-to-day reproducibility.
|
|
|
|
|
|
SOFTWARE DESCRIPTION:
In the era of computerization, the user friendliness and the usability of the computer is very common aspect in the industry. Computers are widely used for the majority of the industrial applications. In order to use the benefit and power of the PC, Libratherm offers standard, customized and dedicated computer programs or the software which runs on the window based operating platform in connection with the various Libratherm make temperature and process controllers, programmers and Data loggers to monitor the online process behaviour. Though, various industrial well known SCADA software package also do the job of PC interfacing, we still prefer to offer our own dedicated DAS software for the reason of our ability of customization, low cost and modification of the required hardware to meet the end users applications - when compared to the SCADA package. The various microprocessor based instruments are interfaced with the PC on RS232 serial port or RS485 bus having MODBUS RTU or ASCII protocol.
DATALOG16 software – designed to interface with our DATALOG-16, monitors and displays the process value of all 16 channels – which are updated every 1 second. Facility to view the real time line graph of the process values, where user can select or deselect the channel, can zoom in or zoom out with auto scaling of x or y co-ordinates, the data base is created in back ground which can also be seen in the tabular format with real time and date. The records can
be easily searched by date, time or by the customized and user selectable field. The software can be customized to group the monitoring of single or multiples systems with suitable identifications.
|
|
The AMR WinControl software package has been specially
developed for data acquisition and measured data processing
with ALMEMO® equipment.
This software makes it very easy and convenient for the user
to program and operate ALMEMO® devices.
The acquired measured values can be displayed,
arithmetically processed, stored, printed and for further data
processing (also ONLINE) can be exported to other software
packages.
It is possible to derive alarm conditions from the acquired or
calculated variables and perform control measures.
The Windows desktop and the context-sensitive online help
ensure a quick familiarisation and a safe handling of the
software.
|
|
Our data acquisition software WinX and PromoLog are developed for collecting process data in industry applications. They read all Nokeval devices equipped with serial output RS-485/232. You can install transmitters, displays or other devices to the same serial bus. WinX is simpler basic program, while PromoLog supports all your needs.
PromoLog also supports our new wireless transmitters for datalogging. It has fully modular structure, this allows you to build the datalogging application for your liking.
|
|
controlls up to 50 machines on a PC server
archiving of the production data in a database
recording and evaluation of the machine data
centralized control of the production line
real time monitoring via online-display
reduction of the production costs
reduction of the controlling staff
Analysis Options :
number of bonds, circuit boards and chips per time interval
quality result of the bond connections
downtime analysis
wire deformation graph (source and destination)
efficiency evaluation of the production shifts
time per production unit, average time per production unit, uptime calculation
bond time, average bond time
log book
data export to MS Excel
user defined analyses are possible
|
|
|
|
|
|
Most data acquisition software packages allow you to display and record data from A/D boards, and to control signal conditioners. Of course DEWESoft does all this brilliantly, but while others stop there, it's where we are just getting started. Imagine if you could add MORE to your recorded data. Imagine if you could plug one or more video cameras into the system and easily add synchronized VIDEO to your data. Or a microphone for sound. Or for mobile applications, plug in a GPS antenna and suddenly record your exact position, heading, speed and distance, and draw a real-time map as you move around. Now you're getting the idea.
DEWESoft turns your Dewetron hardware into a powerful data acquisition system. Our award-winning data acquisition package is second to none when it comes to both pure recording power and ease of use. Normally this is a difficult balancing act: providing lots of capability and performance, without turning the software into a kluge, with endless nested menus and a convoluted user interface. But somehow we have done it, as you will surely attest given a chance to evaluate DEWESoft for yourself.
|
|
|
|
|
|
WinCollect Data acquisition and Reporting Software
Windows® based WinCollect simplifies the tasks of retrieving, collating and presenting data collected from multi-location air monitoring systems.
Supporting single or multi user installations that use Ecotech's proprietary and/or 3rd party products, WinCollect v4.0 provides the user with greater flexibility in choice of
- Licensing
- Reporting
- Variety of data logging instrumentation
Features:
- Easy configuration for a variety of data loggers
- Simple to set up and use
- Customer defined reports are generated via an easy to use wizard and data can be presented in list or graphical format.
- Customers are able to schedule data download and reports at user specified timeframes or in the event of a parameter exceedence. These reports can be then sent automatically to an email, website or remote computer.
- Downloaded data can be imported into a database for viewing, evaluation and validation. Manual changes can be made to this data with the reasons for changes written to an Audit Log.
|
|
Simple, fast, reliable, plug & play.
For all ELPRO dataloggers; self-adapts to the various units.
Can be adapted to match requirements.
Clearly laid-out documents can be created simply and effectively.
We recommend elproLOG QLS, an extended version of the elproLOG standard software, for qualification and validation of pharma and medicine systems. In addition to the standard functions, elproLOG QLS has an audit trail function and an extended qualification manual.
|
|
|
|
|
|
Autosoft 3000 configuration and visualisation software
- Autolog 3000, Autolog 2100 and GPS(USB)
- Alarm management through 4 alarm levels
- Combine channels into groups
- Selectable measurement speed per group
- Loadstep measurements
- Datalogging with graphical and numerical screens
- Binary storage of measurement data with export functionality to ASCII- and DIAdem© format
- Drag and drop functionality
- Triggered start and stop of measurements
- Online rosette calculations
- Pt-100 and thermocouple types
- N-point calibration or polynom-based calibration
Peekel Instruments has been developing software for many years. Based on previous experience with other software packages like Autosoft-C, Autosoft-NT and Signasoft 6000 and listening to customers Peekel has now developed Autosoft 3000. To configure your Autolog data acquisition system, to perform the measurement, to visualise and to store your measurement data. Autosoft 3000 and Autosoft NT and Signasoft 6000 can be used with the Autolog 3000 system. In order to make the right choice an overview of the various possibilities is listed below.
|
|
|
Almost all of Tecnosoft systems have a management software for PC that allows to start the acquisition missions and sort all the acquired data. Extremely user-friendly interfaces, a big number of available options and constant attention to users' requests make Tecnosoft software instruments suitable for any application and need.
|
|
|
|
|
|
Data Acquisition Toolbox™ software provides a complete set of tools for analog input, analog output, and digital I/O from a variety of PC-compatible data acquisition hardware. The toolbox lets you configure your external hardware devices, read data into MATLAB® and Simulink® environments for immediate analysis, and send out data.
Data Acquisition Toolbox enables you to customize your acquisitions, access the built-in features of hardware devices, and incorporate the analysis and visualization features of MATLAB and related toolboxes into your design. You can analyze or visualize your data, save it for post-processing, and make iterative updates to your test setup based on your analysis results. Data Acquisition Toolbox allows you to use MATLAB as a single, integrated environment to support the entire data acquisition, data analysis, and application development process.
Data Acquisition Toolbox also supports Simulink with blocks that enable you to incorporate live data or hardware configuration directly into Simulink models. You can then verify and validate your model against live, measured data as part of the system development process.
|
|
|
|
|
|
ProfiSignal BASIC offers a complete solution for requirements in measurement data acquisition, analysis and visualization. ProfiSignal BASIC combines professional measurement data analysis with modern control and monitoring functions. Twenty five years experience of meeting client needs has gone into the development of this completely new product.
- BASIC is a complete system for the acquisition and analysis of measurement data which also includes process visualization, control and monitoring functions.
- System configuration is clear and easy to understand.
- Data analysis and process visualization is available in one system.
- Limitless assessment and analysis of measurement data - from millisecond to annual time intervals with just one mouse click.
- Data acquisition takes place using the modular Message hardware.
- Transfer of measurement data and assessment via TCP/IP network.
- Data storage possible on server/PC or independently within field device providing especially secure data logger storage.
|
|
|
|
|
|
Fuel data processing server FPS
FPS (Fuel data Processing Server) is intended for integration into vehicles and immovable objects monitoring systems software in order to process fuel level data.
Due to fuel level fluctuations, the content of noise in fuel sensors data is very high. The quality of raw data processing significantly affects the reliability and presentability of fuel information in the client’s AVL software.
FPS-server is integrated into a communication, processing or other server of the AVL-system operator/provider. FPS filters and smoothens the data to determine the actual fuel level at every time moment. After that, the server detects the fact and determines the volume of fuel fillings and discharges. FPS operates on the basis of Smoothing algorithm for the fuel data and detection of fuel fillings and fuel discharges - Fuelmetrix®.
Fuel data processing server FPS is developed in Java and uses sockets for connection. This allows to use it in any operating system and integrate into any software. The server processes fuel level data received from any sensors including regular ones
|
|
Data acquisition and control of Lock-in ampl.
Scan voltage and modulation amplitude control
Serial port (RS 232) communication with Lock-in
Data processing and plotting
Data base of sensitivity factors for RFA analyzer
Composition calculation based on the simple model
|
|
| ... products without technical information |
| |
Data Acquisition and Supervisory Control System
Pages autoconfiguration for gammadue® and/or deltadue® instruments
Data acquisition and monitoring
Process operation
Wide library of drivers
Mimic and pre-formatted pages
Real time and historical trending
Powerful alarm handling
Flexible configurable reporting
Recipe management
Security levels for operator access
Ethernet TCP/IP networking
Data exporting to commonly used databases
|
|
controlls up to 50 machines on a PC server
archiving of the production data in a database
recording and evaluation of the machine data
centralized control of the production line
real time monitoring via online-display
reduction of the production costs
reduction of the controlling staff
Analysis Options :
number of bonds, circuit boards and chips per time interval
quality result of the bond connections
downtime analysis
wire deformation graph (source and destination)
efficiency evaluation of the production shifts
time per production unit, average time per production unit, uptime calculation
bond time, average bond time
log book
data export to MS Excel
user defined analyses are possible
|
|
|
|
|
|
Fuel data processing server FPS
FPS (Fuel data Processing Server) is intended for integration into vehicles and immovable objects monitoring systems software in order to process fuel level data.
Due to fuel level fluctuations, the content of noise in fuel sensors data is very high. The quality of raw data processing significantly affects the reliability and presentability of fuel information in the client’s AVL software.
FPS-server is integrated into a communication, processing or other server of the AVL-system operator/provider. FPS filters and smoothens the data to determine the actual fuel level at every time moment. After that, the server detects the fact and determines the volume of fuel fillings and discharges. FPS operates on the basis of Smoothing algorithm for the fuel data and detection of fuel fillings and fuel discharges - Fuelmetrix®.
Fuel data processing server FPS is developed in Java and uses sockets for connection. This allows to use it in any operating system and integrate into any software. The server processes fuel level data received from any sensors including regular ones
|
|
| ... products without technical information |
| |
Vision software from the world leader.
VisionPro has been set free. Now you can get the world's top vision software with its robust tool library - no matter what camera or frame grabber you use. That means all applications benefit from this broad-based, industrial-grade tool set from Cognex®.
Proven in more than 400,000 installations worldwide, the VisionPro tool library spans all vision needs ... from geometric object location and inspection to identification and measurement.
Combined with flexible and powerful PC-based development, VisionPro makes it faster than ever to create and deploy solutions for the most challenging machine vision applications.
|
|
VisionPro® is a powerful, flexible, rapid deployment PC based vision system typically used for the most complex of machine vision applications.
Using VisionPro%u2019s rapid deployment environment, you can quickly build applications that harness the power of the Cognex vision tool library allowing you to provide solutions that are seamlessly integrated into your process or machine, in a fraction of the time.
|
|
|
|
|
|
Here is the universal DAQ instrument that provides the extra added value for your demanding projects in test and measurement: QuantumX by HBM. Data acquisition at the highest level: small, fast, universal. Upgraded and exponentially enhanced to the power of "X" to give you fascinating, new opportunities: XXL flexibility. XXL efficiency. XXL reliability. Demand more for your measurement tasks. Demand QuantumX!
What do you want to measure today? Benefit from the universal connections QuantumX provides for almost all transducer technologies. QuantumX propels your test and measurement projects into the fast lane regardless of the combination of principles of measurement - just connect your transducers and start measuring... with 24-bit resolution!
QuantumX requires only minimal space for bundling technically superior functions. At only 174 x 44 x 119 mm (6.9 x 1.7 x 4.7 inch), QuantumX fits perfectly into every test bench - even where space is a constraint. The compact design considerably expands the range of applications you can cover - be it centralized or distributed data acquisition.
|
|
|
|
see the results for the following category : 
