|
|
|
From small pneumatic 'bicycle' type pumps to a hydraulic pump that generates up to 15,000 psi (1,000 bar). These are durable pumps with features such as vernier valves, vent valves, manifold connections and swivel fittings, making the pumps ready for your calibration applications.
|
|
HTP1 Pressure Test System
1000 bar, 15 000 psi Hydraulic Pressure (compatible with most fluid media) HTP1-700 and HTP1-1000 are lightweight, easy to use and can generate pressures up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi. HTP1 is well suited for calibrating pressure transmitters, pressure transducers, pressure switches and pressure gauges.
Features & Benefits:
Hydraulic Pressure up to 700 bar / 1000 bar, 10 000 psi / 15 000 psi!
Sealed Construction - NO LEAKS ! NO RUST !
Lightweight, hand held and easy to use.
Optional over pressure protection system (via adjustable relief valve)
Quick priming and pressure generation using scissor action pump.
High pressure / priming selector.
Fine adjustment control.
Pressure release valve.
Large see-through reservoir with a capacity of over 100cc.
Compatible with many different liquids. e.g. mineral oil, distilled water. ('Skydrol' / Brake fluid option also available).
Optional accessories include a carrying case, a set of adaptors and a flexible hose with quick fit connectors suitable for many applications.
|
|
A significant demonstration of the specialised capacity of the Graphic Division is the new generation of highly versatile multiple ejector pumps, capable of blowing or sucking as required. This is a real revolution compared with traditional rotary blade pumps, with performance that unites improved power with more personalized operation:
- Powered with compressed air with pressure variable from 1 to 6 bar.
- Maximum vacuum 90%.
- Suction capacity from 40 to 180 m3/h.
- Maximum blowing pressure 0.8 bar, with capacity from 50 to 250 m3/h.
- Low air consumption and limited weight.
- Surprisingly quiet and complete absence of heat.
- Maximum respect for the environment and minimum maintenance.
- 5 year guarantee.
|
|
|
ANVER TT Series Transfer Tubes instantly provide air movement the moment compressed air is applied and their transfer speed and output flow can be infinitely adjusted by regulating the input pressure. Made from aluminum with a durable anodized finish, they come in a wide variety of bore sizes from 0.375” to 1” (9.5 to 25.4 mm) I.D., with air flows from 15 to 145 SCFM.
|
|
Pneumatic conveying is a core technology of Gericke since more than 60 years! Suction conveyors are very compact, easy to install and simple to operate. The suction unit with its integrated receiving hopper can be placed on feeders, mixers, vessels.
Combined with a weighing sysem, the units work as suction weigher, meaning that batches can be measured during conveying cycle.
The system operate purely pneumatically and are therefore suitable for hazardous areas too.
|
|
Reliability in space-saving dimensions.
The F Series Three-phase Hopper Loaders incorporate the latest technology in vacuum Conveying. Top reliability is assured by the high-pressure and maintenance free side channel blowers..
Power ranging from 0.75 to 11 kW, to be coupled with material receivers with volumes from 1.5 to 140 dm3.
Customer Oriented Solutions:
Compatibility:
- microprocessor control box (compatible with of the Easy2System)
Space saving:
- small foot print (floor filter included)
Absence of maintenance:
- maintenance-free blower
- automatic filter cleaning
- sight glass, to allow monitor of the quantity of powder in the collection bin
- filter clog pressure sensor, that warns necessity of cartridge filter cleaning.
Flexible configuration:
- possibility of combination with one single vacuum receiver or integration in one central material handling system
|
|
Features:
- easy material aspiration and dust-free loading of machines
- gentle conveying, no seperation of material mixtures
- optimum hygiene conditions
- reliable filter systems in GMP quality
- simple to install and to operate
- low energy consumption
- favorable investment- and operating costs
|
|
They exploit the principle of the Coanda effect
They were originally designed for sucking and transporting products like dust, granulates, sawdust, grit, metal shavings, but are also suitable for oil spray and welding fumes
Characterised by their low head and very high volumetric yield
They can also be used as blowers, or for cooling surfaces
Maintenance free, good filtering of the compressed air supply is recommended
Available with intake diameters from Ø 7 to Ø 50 mm
|
|
MULTIEVACUATOR
Many conveying jobs in the plastic processing industry can be solved efficiently by using pneumatic conveying systems.
By combining the Multievacuator vacuum unit with Kongkilde’s OK160 pipe system, efficient conveying systems can be tailor-made to meet most conveying demands from process to process or, to and from a storage facility.
Depending on distance and material, conveying systems with capacities up to 7,000 kgs/hr (250 lbs/min) can be achieved.
The Multievacuator unit is an integrated solution based on a high-pressure centrifugal blower with a cyclone-like separation unit, in such a way that the conveyed material does not pass through the fast-rotating blower rotor.
|
|
The optimized single loader for the flexible conveying of smaller material volumes up to 100 kg/h in permanent operation. Peak performance of up to 250 kg/h.
Robust Stainless Steel Execution
All components in contact with material are made of stainless steel and are therefore perfectly suited for critical and abrasive applications.
Needle Felt Filter With Cleaning
Contains a sealed filter surface on the front to avoid the protrusion of dust particles into the structure of the needle felt filter and therefore higher operating times. Temperature resistance up to 150 C°.
Wand
Included in the standard package is as a 780 mm long wand with air vents for the adjustment of the material load, as well as a 5 m PVC hose.
Proportional Valve (Option)
The proportional valve for the dosing of two components is externally attached to the material inlet. The control allows the selection of the dosing in percent and the number of material levels in the hopper.
Remote Teach Pendant
Second teach pendant with a 2 m cable for convenient accessability in case the loader is mounted on blenders or tall machine hoppers.
|
|
Con-Evator , PGT Vacuum receiver
High performance, environmentally-friendly vacuum hopper loaders covering all aspects of modern conveying technology for plastic materials. The PGT series is based on the vacuum principle and gives a clean, low-noise conveying of materials. No compressed air is required because of a unique non-polluting filter cleaning system. The specially engineered blowers also ensures optimum reliability and consistency..
|
|
| ... products without technical information |
| |
The SludgeMaster submersible, air-powered trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1.5" (3.8cm). High capacity - low head. It weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.
Pipe Size: 3" / 80mm
Displacement Per Stroke: - gal / - ltr
Max. Flow per Minute: 300 gal / 1140 ltr
Max. Solids Handling: 1.5" / 38mm
Max. Discharge Pressure: - PSI / - BAR
The PortaPump submersible, battery-powered pump operates using any 12-volt car or truck battery. It comes equipped with cables and battery clips. Extremely portable, the pump weights only 33 pounds (15kg) and can fit through openings as small as 10" (25cm). Electrically safe and whisper quiet.
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: - gal / - ltr
Max. Flow per Minute: 43 gal / 163 ltr
Max. Solids Handling: 1/16" / 1mm
Max. Discharge Pressure: - PSI / - BAR
|
|
|
Pump is pneumatically operated i.e. through pneumatic line, connected to the ports of cylinder. The cylinder is built in with the pump. During ON period of the pneumatic line, piston inside the cylinder is pushed, ejecting out pressurized grease from the outlet port of the pump body. During reverse flow of pneumatic line, grease is sucked through the suction port in the pump. Spring force through follower plate exerted on the top surface of the grease (filled in the reservoir) makes the suction of the grease positive and easier. The grease thus filled in cylinder is ready for ejection. Pump is mounted on machine frame.
|
|
wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as steel plants or paper mills.
Dropsa provides an extensive line of equipment for grease lubrication and system monitoring. The most popular systems used for grease lubrication are Dual Line and Progressive Divider.
The modular design pioneered by Dropsa allows easy configuration and expandability of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work.
|
|
APPLICATION:
For lubrication at friction points on presses, stamping presses, machine tools, conveyors, etc.
FUNCTION:
By pressurizing the pneumatic cylinder the piston is lifted thus closing first the suction port. Then the lubricant inside the cap is being displaced via valve seat and ball into the piston chamber. When the piston is moving upwards, the cross bore provided, having an annular grovve, reaches the outlet ports.
These ports are not on the same level so that the lubricant is discharged alternatvely, in a premetered quantity. Relieving the pneumatic cylinders returns the piston into is initial position thus recharging the chamber between piston and cap with lubricant.
With single-line and progressive systems the total feed volume of the pump is taken from outlet "X"; through the "Y" port, in single-line systems on the other hand, the lubricant, when depressurized, is returning into the reservoir. The parameter determining the minimum pulse frequences is an empirical value dependent upon lubricant, air pressure, number of outlets, and, last but not least, piping cross- sections and length of main feed line.
|
|
| ... products without technical information |
| |
XVARI Technology
the breakthrough in hydraulic pump technology & ergonomics
Tremendously high oil delivery, precise control and ergonomic operation; three characteristics of the new XVARI® Technology pump developed by Enerpac. Never before have these three vital product characteristics been combined in one hydraulic pump. With XVARI® Technology, Enerpac has again set a new industrial standard for succeeding the 50-year old technology of current air-over-hydraulic foot pumps. The XVARI® Technology replaces the popular and widely-used linear air motor technology with improved ergonomics, precise metering of the hydraulic oil flow and also offers a higher oil delivery for increased productivity and efficiency.
XVARI ~ Be in control
XVARI® Technology enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract mode and thereby the speed of the hydraulic cylinder or tool that the pump is powering - specifically for jobs that require accurate load positioning, aligning and controlled descend. XVARI® Technology enables the user to better control the hydraulic application, improves productivity, enhances process quality and makes the workplace safer.
|
|
| ... products without technical information |
| |
Drains and cleans machine-tool tanks, chlorinated or alkaline solvent baths.
Vacuums dry residue, chips/swarf, sand and filings.
Extremely high reliability - No maintenance required - Extremely high performance - All products.
|
|
... see all the products in the category
Drum pumps
|
|
|
