|
|
|
|
|
|
The new MultiPaq21 data logger has up to eight channels allowing you to collect product and environmental temperatures from up to eight locations at once. Using flexible thermocouple cables, the temperature sensors can be positioned precisely within the product, on the surface, or in the air. They can record temperatures without the data logger or its mass influencing the response characteristics of the sensors and thus the accuracy of the readings.
The data logger is designed to withstand the most hostile of food processing applications and is even rated to IP67 with special waterproof thermocouple connections protecting against steam, water showers and routine cleaning procedures.
The logger will store up to eight profiles before needing to be downloaded. Data logger features:
- 6 or 8 channel logger (accuracy +/- 0.2°C/ 0.4°F).
- Simple start/stop options.
- Can record product & environmental temperature measurements simultaneously up to 400°C / 750°F.
- IP67 waterproof rating.
- Serial or USB compatible.
- Rechargeable NiMH battery which lasts for up to 250 hours between charges.
- Stores up to eight separate runs before you need to download the data.
- Interchangeable thermocouples to suit your product.
- Programmable sample interval.
|
|
|
|
|
|
HTA and HTA-Ex:
HTA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch TA
sensors with thin-film sensor element can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HTA by 9 V battery or HTA- plug-in power supply
power supply HTA-Ex Li-recharchable battery, running time approx. 20 hours.
analog output 0 . 4 V = 0 . x m/s.
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HFA and HFA-Ex:
HFA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch vane wheel sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HFA by 9 V battery or HFA- plug-in power supply
power supply HFA-Ex Li-recharchable battery, running time approx. 50 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HVA:
HVA is for use in category 3G (zone 2)
hand-held instrument with IP64 type of protection to which all Höntzsch vortex sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HVA Li-recharchable battery, running time approx. 20 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
The HPM420 Series readouts and associated pressure, temperature and flow sensors provide an accurate, economical and user friendly solution for servicing and commissioning hydraulic systems and components. The HPM420 readouts have two inputs which recognise which pressure, temperature or flow sensors are connected and automatically sets the correct calibration to each input for the type of sensor being used.
The new USB compatible HPM540 and the HPM460 are ideal for use as in-house or portable display and data logging instruments.
Powered by a 9 Volt rechargeable battery, this easy to use diagnostic test system is a valuable tool for preventive maintenance, verifying component settings, pin-pointing poor system performance, measuring differential pressure and capturing harmful pressure spikes.
|
|
|
The 2-channel digital thermometer is designed for stable, high precision temperature measurement over the range of -200 to +660°C. To further enhance stability, the measurement electronics are encapsulated in a constant temperature oven.
|
|
Handy logger MR2041-E is a palm size data logger, it capable to store up to 10000 data per each channel. Power supply of logger is selectable from AA battery or AC adaptor, so it is usable as a portable type logger or fixing type logger. Using the multi-media memory card (MR-2041-M) can stores measured data up to 5 million.
Using the exclusive software, recording/recalling of data and programming of logging parameters can be executed with logger or through a personal computer.
- Input signals: thermocouple K, E, J, T, 0 to 5V, 0 to 20mA
- Simultaneous 4 channels, measurement and display
- High/low alarms for each channel
- External memory (multi-media card) is usable.
- Calculation function: maximum / minimum / average
- Logging method: log mode and tag-mode
- Data process-able through a personal computer
- CE marking, IP 64 dust tight and splash proof enclosure
- AA battery supply
|
|
|
|
|
|
Single input industrial Digital Temperature logger [615]
Dual input industrial Digital Temperature logger [625]
Quad input dual display industrial Digital Temperature logger [645]
The 600 series EasyCal™ Digital Temperature Logger is microprocessor-based, digital industrial grade multi-channel thermometer designed to use external K-,J-,E-,and T-type thermocouples (temperature probes)as temperature sensors. The series thermometer response quickly and have industrial accuracy (0.1 % + 0.5 °C), logging and PC USB interface capabilities with powerful Windows® software CD. You can calibrate the thermometer using the MENU key while it powered off. The thermocouple with wire spool can be stored in the back of the thermometer.
Distinctive Innovation
The portable design and humanization front panel is convenient to set up, operate and measure for user. You can open the cover and replace batteries conveniently without damaging calibration seal. Also have waterproof, dustproof shell and shock-protected rubber casing, groove in the back used to place the thermometer with wire spool.
Live clock and inside temperature display.
With minimul, max and average of the relative time base, supply time reference for main event.
Quick offset for temperature
Compensate for thermocouple errors to increase the accuracy.
Multiple units
Select °C, °F, or K as units according to requirement.
Low battery indicator
Display “BAT”, when the voltage of batteries is low.
Data recording
Recording up to 9999 locations and recording interval is adjustable.
|
|
Features Specifications: Tecpel 4-Input Temperature Recorder 319
Usage: Industrial Theory: Temperature Recorder Certification: CE
Tecpel 4-input temperature recorder
Dtm-319 features:
Led back light
Four channel input
Four channel display
Auto range
Rs-232 interface
With window software
16,000 records data logger
Auto power off
Hold function
Resolution 0.1deg c 0.1 deg f
Display:
3 1/2 digit lcd
Low battery:
Symbol will appear when the battery is low.
Measurement range:
-200 c ~ 1370 c
-328 f ~ 2498 f
Accuracy:
-200 c ~ 1370 c +/- 0.3% rdg + 1 c
-328 f ~ 2498 f +/- 0.3% rdg + 2 f
Input protection:
60v dc or 24vrms ac maximum
Battery:
9v battery
Operation temp.:
0 c~ 50 c
Storage temp.:
-20 c ~ 60 c
Dimension:
184mmx64mmx30mm( 7.25"x2.5"x1.2")
Weight:
Approx.220g
Accessory:
Manual,9v battery, carrying case, k type bead sensor x 2, rs-232 cable, software; USB Cable OPTIONAL
|
|
CellaLog ®
The temperature data logger CellaLog® is absolutely appropriate for every application where temperatures are measured and registered during a long time automatically, off the line, without requiring wiring but saving place. The temperatures are continuously recorded in a measuring range between - 40 °C and + 85 °C. The observance of limit values, e.g. food or medicines sensitive to temperatures, is monitored and logged.
|
|
There is no easier, accurate, recording pressure system!
The DataloggerXP software*, in tandem with the XP2i digital pressure gauge, forms an integrated data logging solution by collecting, saving and transferring data to a Microsoft Excel spreadsheet. With the XP2i's long battery life, you can record up to 6000 pressure measurements for three months, without the need for external power supplies or battery replacements. Since the XP2i can measure vacuum, you can even capture pressure to vacuum transitions and much more.
Evaluate data graphically. Ideal for field calibration, chart recorder replacement, pressure safety valve (psv) testing, pipeline static pressure testing, leak testing and wellhead monitoring.
*Compatible with Windows 2000, XP and VISTA
|
|
The HOBO water level data logger features high accuracy at a great price and ease-of-use, with no cumbersome vent tubes or desiccants to maintain. This data logger is ideal for recording water levels and temperatures in shallow wells, streams, lakes and freshwater wetlands.
Features:
- Lightning protection - no long signal wires, and electronics are shielded in stainless steel housing
- HOBOware Pro software provides easy conversion to accurate water level reading, fully compensated for barometric pressure (see demo) temperature, and water density.
- Multiple-rate sampling allows faster sampling at critical times such as when pumping starts or stops.
- Available in 4 depth ranges
- Ideal for use in wells, streams, lakes, wetlands and tidal areas
- No-vent-tube design for easy reliable deployment
- Available in stainless and titanium versions
- Durable ceramic pressure sensor
|
|
The key tool for temperature monitoring
TomKEY : the USB key that displays and records temperature
> Integrated USB port, no adapter needed
> Free software
> Calibration certificate included (traceable to international standards)
> High accuracy 0.3°C
> Dust and waterproof IP 67
> Direct Min/Max and alarm readings (no computer needed)
> Measuring range from -40 to +80 °C
|
|
General description:
The Q18 data logger has been designed using the latest miniaturised electronic packaging technology, enabling us to combine speed of readings, superb accuracy and high resolution all in one versatile unit.
- Status indicators and stop/start buttons
- Fast sampling capability and large memory
- Available in two height and width options, each of which has a range of thermal barriers
- Equipped with an internal NiMH battery and intelligent fast charger circuits allowing the user to leave the logger permanently on charge with no risk of damage to the battery
- Start/stop buttons, time or temperature trigger allowing greater user control
|
|
Datalogger HOTDOG DT1 Part No.: 2201
- Working range: -40°C...+70°C, waterproof (measuring), 0°C...+50°C (evaluation)
- Memory capacity: 16,000 measured values
- Time ranges: 2.2/4.4 hours to 500 days
- Measurement interval: 2 seconds to 3 hours
- Casing: SAN, welded
- Weight: 170g
- Battery life: up to 5 years, depending on operating process,
battery exchange by service center
|
|
Data Logger KLIMA II-KT, portable temperature measuring and recording instrument with LCD readout for display of current temperature value and device for connection of a temperature probe FT 10 with connecting cable 10 m long.
The probe with teflon cable has been designed particularly for measurement of core temperature of wood and temperature of other materials. The instrument is additionally fitted with interface for linkup to an IBM compatible PC, exceeding of preset limit signalled by LED, with long life lithium battery.
|
|
Thermal Comfort Datalogger with Transducers :
Poor thermal comfort causes discomfort, headaches and even fatigue. As a result, people suffer both in terms of productivity and overall well being.
LumaSense datalogger Innova - 1221 makes it easier to collect and analyze thermal comfort results. It can be connected to a PC and works with the dedicated Application Software 7301. The 1221 either automatically stores the measurement results for later transfer to a computer or online measurements where the results are directly displayed on the computer screen.
|
|
|
If you are looking for measurement equipment for temperature during time, for thermal traceability of your products or environments, this is the right section where to look at. Here you will find the whole series of Tecnosoft temperature dataloggers, from the simplest systems, nonetheless accurate and reliable, to the wireless systems for online managament of stockhouses or far away branches. We will guide you through the right choiche according to your needs.
|
|
The TC-08 thermocouple data logger offers industry-leading performance and is an inexpensive answer to your temperature measuring needs.
* 8 channel thermocouple data logger
* Measures from -270 to +1820 °C
* Automatic cold junction compensation
* High resolution and accuracy
* Fast sampling rate
* Multiple units can be run on a single PC
* USB interface
The TC-08 thermocouple data logger is designed to measure a wide range of temperatures using any thermocouple that has a miniature size thermocouple connector. Additionally, the TC-08 can also measure other sensors using a 70 mV range.
The TC-08’s USB connectivity allows up to 20 TC-08 USB data loggers to be used simultaneously on one PC - making the TC-08 ideal for use as a large multi-channel temperature acquisition system with a cost per channel significantly lower than other systems of this size.
|
|
Datalogger ECOLOG TN4 Part No.: 2421
- For 4 NTC probes -50°C..+140°C
- Memory capacity for 64,000 measured values
- Large display with alarm information
- Key pad with 4 keys
- External start, alarm reset, measured value and alarm scroll
- 2 digital inputs
- DB15 multifunction connection with alarm output and RS232
- Direct printout of measured values and alarm data at printer
- Ecolog TN4 with white housing Part No.: 2421-W
- Ecolog TN4 EEX with approval for EEX zone 1 Part No.: 2421-Ex
|
|
General description:
Compact, highly sophisticated and accurate, this logger records 130,000 data readings over 10 selectable channels.
Variable sampling intervals and multiple event programming provides detailed analysis where heat treatment processes are followed by fast moving sections of the product temperature profile, such as gas or water quenches.
Combined with a built-in transmitter to see these processes in real
time, this is an ideal data logger for all applications.
|
|
|
The McElroy DataLogger® is used to record and document key parameters of the fusion process. This cost effective device can be used to verify that proper procedures have been followed prior to installation. The DataLogger consists of a rugged handheld computer as the recording device wirelessly connected to a data collection device. The data collection device records the heater temperature and fusion pressure profile over time. All data is recorded and transmitted to the handheld computer where the joint report can be stored, viewed, printed out directly and transferred to a desktop computer for archiving.
|
|
|
|
|
|
The independent PDF Logger® revolutionizes cold chain monitoring
With the LIBERO PDF Logger®, you require only one single device and no specific software to monitor temperature during the global transfer of goods to respective destinations. The LIBERO can be plugged into the USB interface of any PC to automatically generate a PDF file which can be read anywhere without difficulty. The ELPRO LIBERO is the first PDF datalogger in the world which complies with the ISO Standard 19005-1-Document Management.
Specifications
Temperature logging from -35°C to +70°C with internal sensor
Multiple use on 400 operating days within 3 years (switch on/off possible)
16,000 temperature data points
Accuracy of measurement: +/- 0.2° (-10°C to 25°), -/+ 0.5° (from -35° to -10° and 25° to 70°)
Logging modes: start/stop mode, loop mode (Ti1 only)
2 alarm limits or 5 alarm ranges
Integrated PDF file generator which automatically creates an evaluation file including a chart
Evaluation report (Adobe® PDF/A) with text and graph visualizing the temperature curve and the raw data for all transport sections
Whitepaper PDF/A
Possible applications
Pharmaceutical industry
Transport of medication, vaccines, units of stored blood, ampullae, ointments as well as active pharmaceutical ingredients and basic elements
Clinical trials (medication tests and launches)
Shipments to uncommon delivery destinations with decent infrastructure
Biotech
Transport of temperature-sensitive products
Food industry
Transport of perishable foodstuffs (fresh, refrigerated and frozen products)
Transport of flowers and other temperature-sensitive products
|
|
This data logger measures and stores over 32,000 temperature readings from either a K, J or T type thermocouple . A thermocouple is attached via the thermocouple socket at the base of the unit. The user can easily set up the thermocouple type, logging rate, start-time, logging mode, and download the stored data by plugging the module straight into a PC's USB port and running the purpose designed software under Windows 2000, XP or Vista(32-bit only). Data can then be graphed, printed and exported to other applications.
Each EL-USB-TC data logger is supplied complete with a basic K-type thermocouple (for 0 to 400ºC measurement), long-life lithium battery, which will last for approximately 6 months.
This is a popular part, normally stocked in high quantity and suitable for new designs.
|
|
General description:
Uniquely designed for exceptional durability and thermal resistance. Made entirely of high quality 310 stainless steel and featuring Floating PlateTM technology, these long lasting barriers resist oxidation and distortion better than ever before.
The 4900 series of barriers are ideal for applications such as annealing, aluminum or stainless steel brazing, frit sealing and annealing, and steel heat treatment processes.
|
|
| ... products without technical information |
| |
|
|
