|
|
|
|
|
|
Waldmann ESD-luminaires smooth discharge protects valuable components.
Waldmann ESD-luminaires are designed and manufactured using methods that eliminate an electrostatic build-up and controls discharge. Plastics present a significant danger. They are insulators and cannot normally conduct electricity.
The use of special plastics has made it possible to reach the necessary discharge ability for electrostatic charges. It is not recommended to equip the luminaires with any conductive materials, especially metal. An electrostatic build-up is conducted through metal at high speed, and this dramatically increases the risk of a harmful spark discharge.
The grounding of the luminaire components is equally as important as the use of anti-static materials. Without a functional ground, the use of the best materials is ineffective.
All Waldmann ESD-luminaires have been ap-proved by the internationally respected Swedish institution SP. A copy of the certificate is available upon re-quest from Waldmann.
The housing, the magnifier frame and the joints of the Waldmann luminaires are molded from special plastics. All steel and aluminium parts are specially treated to ensure a controlled electrostatic discharge.
|
|
Highlights ABLL 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Exactly adjustable via ball joint
- Minimum design Ø 29 x 94 mm
- Easy to mount
a) via threaded stem M18 x 1.5 mm
b) via bore and counter nut
- International protection IP 67
- High-resistance coating against heat, wear and corrosion
- ESD protective diode
© Herbert Waldmann GmbH & Co. KG
|
|
Highlights HLWQE 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Hart-coated aluminium housing for improved wear and corrosion protection
- Protection from electrostatic charge and polarity reversal
- Choose between spot or area light
- Special lens holder for maximum luminance
- Insentive to vibration and temperature changes
|
|
|
|
|
|
FLAT LED - LED Flood Light
FLAT LED - A machine luminaire with minimal height, maximum luminous power and intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current. The impressively flat design is the result of innovative Waldmann optics technology. It produces a beam angle of 60º, which ensures large-scale, uniform illumination of the processing area. As a result, process reliability and productivity are increased.
Characteristics:
* FLAT LED - maximum light with minimum height - perfect for machines with small installation space.
* Intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current.
* PLUG - fast installation, thanks to integrated LED operating device.
* LIGHT - safe operation without stroboscopic effect and minimal heat build-up.
* High-performance LEDs with a service life of 50,000 hours.
* Available in FLAT LED mounted / integrated version.
* Absolutely waterproof - system of protection IP 69K.
|
|
SPOT LED 003. PLUG + LIGHT
Waldmann underscores its claim as an innovation leader with the new machine luminaire SPOT LED 003:
- No stroboscopic effect.
- Intelligent circuit board.
- No heat generated in the direction of the light beam.
- Depending on the application, the SPOT LED 003
can be flexibly used as either a spot or area light.
- Service life up to 50,000 hours or around 6 years of continous operation.
- Insensitive to vibrations and knocks.
- High blue proportion in the light of the LEDs promotes
concentration and motivation.
- Compact dimensions.
|
|
Machine Luminaire PRO LED
The PRO LED luminaire series offers a wide range of variability.
For example, four different lengths are available so that the lighting can be adjusted to the particular room dimensions.
Depending on the task, less or more light illumination may be necessary. Here as well, the PRO LED offers various options due to the availability of different beams angles.
The PRO LED luminaire series features the latest LED technology and intelligent thermal management, which ensures a long LED service life. The luminaire’s aluminium casing, as well as the 4 mm-thick safety glass is resistant to wear & tear, coolants, lubricants, chip bombardments and is also waterproof in accordance with IP 67. Plus the luminaire can be operated at ambient temperatures of up to 40 °C.
|
|
The MACH LED offers variability in new dimensions. The MACH LED can be individually adapted to illumination requirements.
MACH LED is equipped with the latest LED technology and thermal management, which guarantees a long service life of the LEDs. The aluminum housing is wear-resistant, insensitive to lubricants and coolants, resistant against the bombardment of chips and waterproof according to IP 67. And another important feature: MACH LED is suitable for ambient temperatures of up to 40° C.
|
|
ONE LED was created following the motto "maximum light, minimal housing". However, the ONE LED provides maximum lighting despite its minimal design at ambient temperatures of up to 50°C. The ONE LED is therefore not only predestined for printing presses, but are suitable for all machines with minimum space and high temperatures.
The connection is fast and easy with the Quickon connection system. Connection errors are excluded, since the ONE LED is equipped with reverse polarity.
The sturdy die-cast housing and the tempered safety glass provide added security in the production process. The ONE LED with an additional holder provides a precise alignment of the LED light.
|
|
LED Machine Luminaire SLIM LED
The SLIM LED is the lighting solution for machines and equipment with space-constraints and limited installation space.
The sleek profile of the luminaire is not one millimeter higher and wider than necessary.
The luminous power, in contrast, is tremendous. SLIM LED luminaires are
equipped with the latest LED technology.
This allows large-scale and powerful illumination of machine workplaces.
In addition, the light emission direction can be individually adjusted.
SLIM LED luminaires are available in lengths ranging from 196 to 1176 mm - flood lighting made to measure.
|
|
LED Magnifier Luminaire
RING LED
The RING LED is the lighting solution for
the precise examination of parts in
numerous fields of application - from
mechanical engineering to research and
development.
The use of six innovative LEDs instead of a conventional fluorescent tube provides critical added value: 4 times more light per watt, thus considerably lower energy consumption.
The integrated high-tech optics focuses the light on the work surface. Loss of lighting due to diffusion is therefore minimized and the light is optimally used.
|
|
|
|
|
|
FLAT TEC - More freedom for your engineering
FLAT TEC is the new generation of machine luminaires, which are considerably flatter than all comparable systems. This not only allows for greater engineering freedom, but also meets the demands for a contemporary design. In addition, they offer further benefits, such as clearly higher light efficiency, easy integration, considerably longer maintenance intervals, and lower service costs.
FLAT TEC characteristics:
* More freedom - thanks to the flat profile, the entire machine compartment is accessible.
* More light with equal energy consumption - modern T16 light tubes produce considerably higher luminous flux rates than comparable lamps, are shorter and have a smaller diameter.
* Easy integration - The luminaire is connected easily and safely via a plug connection.
* An intelligent thermal management system significantly increases the service life of lamps and operating devices. The benefits are longer maintenance intervals as well as reduced spare parts and service costs.
* Robust design for the toughest requirements - Anodized metal housing made of aluminium. 100-percent leak-proof through special corner seals, resistant to conventional coolants and lubricants. High strength and stability due to 4 mm thick safety glass.
* Absolutely waterproof – IP 69K protection class, pressure jet-tested up to 100 bar.
|
|
FLAT TEC HYBRID is the innovative lighting
solution for machining centers with very limited space for adapting luminaires in the machine compartment.
Two lighting technologies in one housing.
For one, a highly efficient fluorescent lamp for the extensive illumination of the machine compartment. Secondly, two LEDs for the pinpoint illumination of the machining area. Both types of light – in keeping with the specific need for light – can be switched together and separately.
Additionally the FLAT TEC HYBRID a visible statement for environmentally oriented companies.
|
|
SNL 319, SNLE 319 (with electronic ballast)
- 2 optional types of light.
- Pivoting magnifier.
- Intense light.
- Most modern energy saving lamps.
- Effortless adjustment without cumbersome swinging movements.
- 3-D ball swivel head.
- Spring balanced joints.
- ESD-version also available.
|
|
|
Waldmann inspection luminaires are always used when colors, surfaces, and material quality need to be checked visually. In addition to their use in printing, inspection lights are essential also in many other areas.
|
|
|
|
|
|
Waldmann ESD-luminaires smooth discharge protects valuable components.
Waldmann ESD-luminaires are designed and manufactured using methods that eliminate an electrostatic build-up and controls discharge. Plastics present a significant danger. They are insulators and cannot normally conduct electricity.
The use of special plastics has made it possible to reach the necessary discharge ability for electrostatic charges. It is not recommended to equip the luminaires with any conductive materials, especially metal. An electrostatic build-up is conducted through metal at high speed, and this dramatically increases the risk of a harmful spark discharge.
The grounding of the luminaire components is equally as important as the use of anti-static materials. Without a functional ground, the use of the best materials is ineffective.
All Waldmann ESD-luminaires have been ap-proved by the internationally respected Swedish institution SP. A copy of the certificate is available upon re-quest from Waldmann.
The housing, the magnifier frame and the joints of the Waldmann luminaires are molded from special plastics. All steel and aluminium parts are specially treated to ensure a controlled electrostatic discharge.
|
|
Service life of 50,000 hours (at a luminous-flux reduction to approx. 70%).
Hard-coated aluminium housing for improved wear and corrosion protection.
Protection from electrostatic charge and polarity reversal.
Choose between spot or area light.
Special lens holder for maximum luminance.
Insensitive to vibration and temperature changes.
|
|
Highlights HLWQE 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Hart-coated aluminium housing for improved wear and corrosion protection
- Protection from electrostatic charge and polarity reversal
- Choose between spot or area light
- Special lens holder for maximum luminance
- Insentive to vibration and temperature changes
|
|
LED Magnifier Luminaire
RING LED
The RING LED is the lighting solution for
the precise examination of parts in
numerous fields of application - from
mechanical engineering to research and
development.
The use of six innovative LEDs instead of a conventional fluorescent tube provides critical added value: 4 times more light per watt, thus considerably lower energy consumption.
The integrated high-tech optics focuses the light on the work surface. Loss of lighting due to diffusion is therefore minimized and the light is optimally used.
|
|
SNL 319, SNLE 319 (with electronic ballast)
- 2 optional types of light.
- Pivoting magnifier.
- Intense light.
- Most modern energy saving lamps.
- Effortless adjustment without cumbersome swinging movements.
- 3-D ball swivel head.
- Spring balanced joints.
- ESD-version also available.
|
|
|
Waldmann inspection luminaires are always used when colors, surfaces, and material quality need to be checked visually. In addition to their use in printing, inspection lights are essential also in many other areas.
|
|
|
|
