|
|
EPS cartridges are designed to meet the special needs of the electronics and high purity chemical industries. Polyethersulfone membrane cartridges are resistant to most acids and bases and capable of handling strong sanitization agents. High flow rates make Polyethersulfone a good choice for central DI water systems. This membrane will also handle elevated process temperatures in compatible fluids. To minimize extractables, each cartridge module is pulse, power flushed until the rinse effluent reaches 17+ Megohm-cm and less than 3 ppb TOC. Each cartridge module is also individually tested.
|
|
Application
Filtration of water, cooloing agents, process water, aqueous solutions, aggressive and chemical liquids
Special characteristics
Filtration direction from inside to outside, in case of change of elements the contamination cannot reach the clean side. Easy change of elements without getting in touch with the medium.
Design / technical data:
In-line filter / duplex-filter, nominal width beteen 25 and 500 max.
Working pressure: 40 bar at 90°C, materials: steel; coated steel, stainless steel
|
|
Products
With our large line of filtration options, Automatic Filters Inc. can meet virtually all of your water filtration needs. To find out more about a specific series of TEKLEEN® filters, follow the links below.
|
|
TEKLEEN® has over 50 models from 1/2" to 24," and flow rates from 10-12,000 GPM on a single filter. TEKLEEN® is competitively priced and offers stainless steel filters for the same price as carbon steel. The automatic cleaning process will also save you time and money by practically eliminating maintenance costs.
Let Automatic Filters Inc. meet all your industrial water treatment needs, such as cooling water filters, water tank filters, chiller water filters, sugar juice filters, sand filters, well water filters, r/o prefiltration, spray nozzle protection, white water filters, gland seal filters, screen water filters, industrial water filters, automatic strainers, and more.
Typical Industrial Water Filter Applications
# Cooling Water
# Spray Nozzle Protection
# Waste Water
# Municipal Water Reuse
# Plant Intake Water
# R.O. Prefiltration
# Pickling
# Descaling
# White Water
# Injection Molding
# Gland Seal Protect
# Pasteurizing Tunnel
# Bottle/Can Rinser
# Car Wash
# Vacuum Pumps
# Continuous Casting
# Sugar Juice Filtration
# Water Treatment
|
|
690 Marine Bronze Duplex Strainer
Size: 3"
Strainers provide positive and inexpensive protection for costly pumps, meters, valves,
and other similar mechanical equipment by straining foreign matter from the connected piping
system. Installation of a strainer before mechanical equipment can ensure trouble free service
and avoid costly shutdowns for repair or replacement of equipment damaged by foreign
matter. The size of the perforation or mesh in the basket screen will determine the smallest
particles captured. See Strainer Information section of the Mueller Steam Specialty
Engineering binder for detailed information including sizes and materials available.
Typical Service
As with all duplex strainers, these are used where flow cannot be shut down for basket cleaning.
These sight glass duplex strainers are typically used in engine cooling water systems in seawater and heat exchanger applications.
When supplied with fine mesh lined baskets, they can be used to clarify potable water supplies.
Features
Clear acrylic basket chambers allow direct visual inspection of the fluid flow and basket condition.
Flow diversion is accomplished by a single tapered plug diverter that moves 90°, thereby opening one chamber while closing the other.
Sight glass chambers and baskets are accessed for easy cleaning, inspection, and replacement by removal of two wing nuts.
|
|
|
Filter Skids are the compact and immediate solution for many filtration needs. These are small units with flow rates from 10-250 gpm and a filtration range from 3,0005µ-5µ. Small centrifical pumps 3-50 h/p, with any voltage. Available in all SST construction at a very competitive price.
|
|
On-Site Pack Making:
SPX Cooling Technologies' extensive knowledge and experience in manufacturing Marley cooling tower PVC film-fill carries over into PVC media production for the biomedia market. Our capabilities in fill production include the ability to manufacture adhesive bonded packs at the jobsite. In some cases, the ability to manufacture fill on-site means a lower cost to the customer and assures the highest quality product available and eliminates the dependency on freight carriers.
This ability also assures a timely delivery of packs at the jobsite potentially
reducing construction downtime and labor costs.
Construction Services:
As a single-source supplier for cooling tower components, SPX Cooling Technologies extends the same philosophy to water waste treatment/biomedia installation. Construction is an integral part of the teamwork responsible for function and performance of your biological wastewater treatment. MARPAK biomedia is installed under the supervision of trained and experienced personnel-in most cases the entire crew are full-time SPX employees. Our superintendents are trained in the proper procedures for Marley fill pack installation-their many years of experience enables them to spot potential problems during the construction phase. SPX Cooling personnel installing Marley components on a regular basis insures consistency and quality.
|
|
You need cartridge filters with long life, high efficiency and low total operating cost and that's what you get from GE Water and Process Technologies. With an extensive range of filters to meet all of your microfiltration needs:
- RO pre-treatment
- Pure water filtration
- Food and Beverage
- Electronics
- Oil and gas
- Chemical processing
- Pharmaceuticals
- Medical
- General industry
GE provides, and continues to develop, high-performance products backed by years of experience. Our cartridge filters are made with no wetting agents, solvents, anti-static agents, or binders. FDA-compliant filters are available for food and beverage contact.
|
|
| ... products without technical information |
| |
Oil and Water Vapor Adsorbers (25-2,200 scfm)
Oil vapor can be very detrimental to many products and processes including food, pharmaceutical, instrument, hospital and electronics applications. In these cases an oil adsorber should be installed downstream of both lubricated and non-lubricated air compressors as hydrocarbon vapors are found in ambient air and can be concentrated in the compressed air stream. Oil adsorbers use a charge of activated carbon to remove unwanted hydrocarbon vapors. These adsorbers can be used as single tower water vapor adsorbers with a charge of activated alumina.
Stainless steel diffuser and adsorbent support screens for superior corrosion resistance.
Down flow design for less fluidization and longer adsorbent life.
ASME section VIII designed, manufactured and stamped (where applicable) for certified quality assurance
Specially selected carbon and aluminum adsorbents for low pressure drop.
Separate fill and drain ports for ease in adsorbent replacement.
|
|
| ... products without technical information |
| |
Filters separator diesel water/gas oil RACOR
Description:
- A broad range of filters for the protector of the engines with the series SPIN ONE of Parker RACOR conceived for the systems of modern injection.
- Flow of 57 with 600l/h.
- Filtration of 2,10 or 30 microns
Advantages:
- Almost indestructible transparent Bowl, resistant to UV and winter temperatures.
- Powerful pump of starting and heaters integrated in the head of the filter.
- Filter Media hydrophobic Aquabloc.
- Water Presence detector.
Applications:
- Filtration of diesel biodesel and gasoline for TP, Bus, Truck, Agriculture, Mobile, Navy, Generator sets
|
|
Problem
Cooling tower water is often contaminated by airborne dust, sand, pollen, algae, and pipe scales. These contaminates circulate through heat exchangers, chillers, and compressors, significantly reducing the system's cooling ability. Dirt particles in the water foul the system by settling on warm surfaces. Calcium and magnesium are the bonding elements that cement the dirt on the equipment. Chemical analysis shows that the calcium and magnesium are less than 2% of contaminates, while the rest is dirt that is brought in by the cooling tower. Scale formation reduces the heat transfer rate and increases the water pressure drop through the heat exchanger, condenser, and pipes. A study by Carrier® shoes found that 0.002" fouling will increase pumping needs by 20%.
Solution
Filtration is one of the simplest and most convenient ways of solving these problems. TEKLEEN® self-cleaning water filters provide the ultimate solution where dirty water is a problem. The filters operate on line pressure alone. The self-cleaning process is triggered by a pressure differential and is accomplished in seconds without interrupting the main flow. The filters are compact in size and designed to meet a variety of industrial applications. ASME code stamp vessels are also available as an option.
|
|
|
The mixed water preparation unit allows to obtain water of the desired hardness in your distribution circuits. It gives you a reduction in marking and less demanding maintenance of your sinks.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Oil and Water Vapor Adsorbers (25-2,200 scfm)
Oil vapor can be very detrimental to many products and processes including food, pharmaceutical, instrument, hospital and electronics applications. In these cases an oil adsorber should be installed downstream of both lubricated and non-lubricated air compressors as hydrocarbon vapors are found in ambient air and can be concentrated in the compressed air stream. Oil adsorbers use a charge of activated carbon to remove unwanted hydrocarbon vapors. These adsorbers can be used as single tower water vapor adsorbers with a charge of activated alumina.
Stainless steel diffuser and adsorbent support screens for superior corrosion resistance.
Down flow design for less fluidization and longer adsorbent life.
ASME section VIII designed, manufactured and stamped (where applicable) for certified quality assurance
Specially selected carbon and aluminum adsorbents for low pressure drop.
Separate fill and drain ports for ease in adsorbent replacement.
|
|
|
|
see the results for the following category