Power: 0.09 kW - 2.2 kW
These drip-proof induction motors are built with a reliable and robust structure. They permit simple integration and optimal adaptability. They feature a power range of 0.09 to 2.2 kW, self-cooling, standard or adapted ...
Power: 291 kW
Rotational speed: 534 rpm - 2,268 rpm
... permanent voltage：1000V Rated Current：520A Max. Current：650A Rated Speed：534r/min Max. Speed：2268r/min Cooling air：70m³/min Rated Efficiency：91%
Torque: 1 Nm - 10,000 Nm
Power: 1,000 W - 600,000 W
Rotational speed: 1,000 rpm - 30,000 rpm
CEDS asynchronous motors offer you special advantages: Low maintenance Long lifetime Compact designs Special designs Great overload capacity due to high overturning moment Large field weakening range with constant ...
Torque: 1 Nm
Power: 500 W
Rotational speed: 3,000 rpm
Brushed DC Motors · Voltage: 6V ~ 400V DC · Speed: 600rpm ~ 15,000rpm · Power up to 4500W · Frame Types (OD): 38ZY, 40ZY, 42ZY, 45ZY, 52ZY, 55ZY, 60ZY, 63ZY, 64ZY, 71ZY, 76ZY, 80ZY, ...
Power: 14.9 kW - 370 kW
Our DC armored mill motors are designed with an highly effective low-noise cooling system that allows high power – high torqueperformance from compact machines. High torque performance is possible ...
Torque: 2.06 Nm - 71.3 Nm
Power: 0.75 kW - 22 kW
Rotational speed: 2,880 rpm - 3,560 rpm
... above sea level) - Ambient air temperature: -15°C / +40°C Voltages/Frequency - 208-230λλ/460λ V Motors (2 poles) IEC 80÷160 Rated operation 208-230λλ/460λ V – 60 Hz x Pn 200λλ/400λ V – 50 Hz ...
Power: 0.75 kW - 18.5 kW
... Frequency: ±2% nameplate frequency • Altitude: ≤ at 1000 m. (above sea level) • Ambient air temperature: -15°C / +40°C for motors with Pn > 0,6kW +5°C / +40°C for motors with Pn ≤ ...
Torque: 0.25 Nm - 12.2 Nm
Power: 0.09 kW - 3 kW
Rotational speed: 1,630 rpm - 3,470 rpm
... - Altitude: ≤ at 1000m (above sea level) - Ambient air temperature: -15°C / +40°C for motors with Pn > 0,6kW +5°C / +40°C for motors with Pn ≤ 0,6kW Voltage/frequency - Single-phase ...
Power: 190 kW
... Wheel diameter：840/805/770mm (New wheel/half worn/full worn) Axle arrangement of motor car：Bo-B Configuration：+TC-MP-M-T-MP-TC+（3 M-car 3 T-car） Gear drive ratio：107/16（6.6875）（Gear-drive efficiency: 98％）
... asynchronous air cooling motor Cooling mode: ICO141 Rated frequency: 50Hz/60Hz Rated voltage: 220/380v, 230/400v, 240/415v Working system: S1 Introduction XDseries air ...
Y2 SERIES THREE PHASE ELECTRIC MOTOR
Power: 0.09 kW - 30 kW
... to IP66 Cooling: Self-ventilated, Self- or non-ventilated, forced ventilated Mounting Options, Foot and flange mounting Options, Two Speed Motors Brake and encoder mounting Motor ...
Power: 0.06 kW - 710 kW
Rotational speed: 3,000, 1,500, 750, 1,000 rpm
... in the air, marine splash water and major temperature fluctuations. These motors conform to the requirements of national and international classification societies. They are designed according to and ...
Power: 1.85 kW - 11 kW
Rotational speed: 1,365 rpm - 2,870 rpm
... hollow shaft motors but retaining the features of standard motors. Encapsulated motors with elastic coupling Orange 1 Group has developed the most advanced technology on the encapsulation ...
Torque: 1.6, 2.8, 2.2, 3 Nm
Power: 250 W - 1,000 W
Rotational speed: 1,500, 3,000 rpm
... forms and dimensions; - Waterproof or open motors with different degrees of protection; - EMI suppression filters (standard in many motors); - Position, speed and shifting sensors such as encoders, can ...
Your suggestions for improvement:
Receive updates on this section every two weeks.