Aluminum check valves

Pressure: 300 psi
Temperature: 32 °F - 230 °F

The Clippard Pilot-Operated Check Valve works as a standard check valve, but can also be opened with an air pilot signal to allow free flow in the normally checked direction. ...

DN: 0.25, 0.375, 0.5, 1, 0.75 in

Membrane check valves These valves have the same features of the previously described check valves, but they are made with anodised aluminium, which ...

Flow rate: 38.3 l/min - 616.7 l/min

These check valves are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered. Thread size M5, G1/8, G1/4, G3/8, G1/2. Applications: - ...

Pressure: 0.5 bar - 10 bar
Temperature: -20 °C - 80 °C

Enables air to be exhausted quickly from air reservoirs and cylinders Allows higher cylinder speeds to be achieved Simple, compact design and construction Very reliable in operation Medium: - Compressed Air Port ...

Pressure: 0.7 bar - 7 bar
Temperature: -20 °C - 80 °C

Enables air to be exhausted quickly from air reservoirs and cylinders Allows higher cylinder speeds to be achieved Simple, compact design and construction Very reliable in operation Medium: - Compressed Air Port size: - G1/4 Seal ...

Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

Allow free flow in one direction only Simple reliable design Low weight Low cracking pressure High operating pressure Medium: - Compressed Air;Vacuum Seal material: - Silicon free nitrile

DN: 0.5 in
Pressure: 0 bar - 0 bar
Temperature: 70 °C

... minimal noise emission WITT non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every ...

DN: 1, 0.5 in
Pressure: 0 bar - 16 bar
Temperature: 70 °C

... including: safety element: non-return valve [NV] every non-return valve 100% tested DIN EN ISO 5175-2 ultra-low opening pressures (approx. 4 mbar), ultra-low pressure drop WITT ...

DN: 2.5 in
Pressure: 0 bar - 20 bar
Temperature: 70 °C

WITT non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...

DN: 0.25 in - 2 in
Pressure: 0 bar - 15.9 bar
Temperature: -18 °C - 93 °C

... high-quality Check Valves are specially manufactured in the U.S.A. by ANVER, for ANVER lifting systems. Versatile, one-way Check Valves work with nearly all of ANVER’s ...

VI SERIES FLOW REVERSING VALVE The “VI” flow reversing valve is used as an accessory for side channel blowers to switch the flow from pressure to negative pressure and vice versa. The flow reversing ...

... and entirely from aluminium alloy, it is not subject to contacts and/or interference between the selector and the valve body. This product is available with 24VDC or 110V/60 Hz and 220V 50/60hz electrical ...

DN: 12.5 mm - 50 mm

Forged steel pressure seal swing check valve The Forged Pressure Seal Valves utilize a pressure seal bonnet designed to improve bonnet sealing performance as pressure increases. The ...

DN: 300, 350, 250 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

viscous, loaded or thick liquids PRESSURE PFA/PS in bar θ 80° CASING : 318 : GJS ductile iron epoxy coated308 : GJS ductile iron epoxy coated STRAINER : galvanised steel Seal : NBR BALL :Aluminium, NBR coated (DN50 to 100) Cast ...

DN: 300, 350, 250 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

wastewater , slurries , viscous , sanitation PRESSURE PFA/PS in bar θ 80° CASING : 418 : GJS ductile iron epoxy coated408 : GJS ductile iron epoxy coated Face to face dimensions acc. to EN558-1 serie 48 Seal : NBR BALL :Aluminium, ...

... completes its product range by the full range of ball valves and non-return valves employed where fluid flows in one direction and has to be kept under pressure. Our non-return valves ...