- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Double-acting cylinder
Double-acting cylinders
Stroke : 0 mm - 2,800 mm
Pressure: 2 bar - 8 bar
Rod diameter: 32 mm - 125 mm
ATEX: optional Versions: low friction version version with tie rods version with metal scraper
AIRTEC Pneumatic
Stroke : 850 mm
The pneumatic cylinder with guided piston rod is designed to maintain a controlled rotating motion while on the push-in and push-out phase. This double-operating pneumatic cylinder yields ...
BANSBACH easylift
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 10 mm - 320 mm
Force: 30 N - 295 N
... applications. Both aluminum heads are fixed to the stainless steel tube by a rolling process. ISO 6432 cylinders can be realized with double or single effect (pushing or pulling), magnetic, with bumper ...
Airwork Pneumatic Equipment
Stroke : 6 in - 20.13 in
Bore: 2 in - 11 in
Pressure: 8.9 psi - 10.2 psi
Double-Acting, Hydraulic-Return industrial cylinder. Designed for high tonnage and built for a high cycle life. The RD Series cylinder is precisely constructed for bridge ...
SPX Hydraulic Technologies
Stroke : 0.5, 1, 0.375 in
Our center-hole cylinders can be used as single or double-acting workholding devices. Mounting can be done in any of several ways: use the thru-holes for mounting from the top, use the ...
SPX Hydraulic Technologies
Stroke : 1.5 in - 3 in
Bore: 2 in - 8 in
Pressure: 8,943 psi - 10,393 psi
Single-Acting and Double-Acting Spring-Return cylinder. The RSS Series cylinder is ideal for confined areas from 3 1/2" (88,9 mm) to 11 7/16" (290,2 ...
SPX Hydraulic Technologies
Stroke : 10 mm - 500 mm
Force: 16 N - 250 N
Torque: 0.12 Nm - 1.8 Nm
Working pressure: 1,5-10 bar Ambient température: -20 - 80°C Fluid: filtered air, lube or non lube Barrel: stainless Steel with crimped heads, and piston rod in stainless Steel. Standard strokes (see table page 4) Type M160 ...up ...
UNIVER Group
Stroke : max 4000.0 mm
Pressure: max 200.0 bar
Speed: max 0.5 m/s
• Piston Ø 40-100 mm • Modern seals and guide elements • Simple replacement of wear parts through rugged screw system • Subsequent retrofitting and revaluation possible through unit construction system • Rod screw thread, non-toleranced ...
Stroke : 5 m
The double-acting cylinders in this series are manufactured and tested in-house to the latest quality standards by Atos. There are numerous advantages of investing in these items, such ...
ATOS
Stroke : 125 mm - 250 mm
A series of general purpose cylinders with large bore sizes (Dia.125 to Dia.250). There are a wide range of variations. This cylinder is now even more reliable and lighter than ever before! Adopting an ...
CKD
Stroke : 25 mm - 3,000 mm
... with ISO 15552 standard ensures complete interchangeability of these cylinders with the previous ones to ISO 6431 / VDMA 24562 standards, defining the dimensions of both the “nude” cylinder than assembled ...
Waircom
Stroke : 0 mm - 8,000 mm
Bore: 90 mm - 600 mm
Pressure: 0 bar - 600 bar
... has specialised in the manufacture of hydraulic cylinders since 1976. With almost 50 years of expertise in cylinder manufacturing, Hidromec is a leading Italian supplier of customised hydraulic cylinders ...
Stroke : 0 mm - 300 mm
Bore: 40 mm - 75 mm
Pressure: 120 bar
... range of fork steering cylinders for agricultural vehicles, earth moving vehicles and forklifts. The hydraulic actuators automate the entire driving process, by minimizing the human interaction with the machine. The ...
BELL S.R.L.
Stroke : 0 mm - 140 mm
Bore: 60, 80, 50 mm
Pressure: 200 bar
... Series are designed for agricultural vehicles, earth moving vehicles and forklifts We manufacture double acting balanced hydraulic lifting cylinders with front hitch. Ideal for agricultural ...
BELL S.R.L.
Stroke : 107.5 mm - 185 mm
Pressure: 100 bar
Fluid temperature: -30 °C - 100 °C
... 10DE Series which are unbalanced double-acting steering differential cylinders. The hydraulic actuators automate the entire driving process, by minimizing the human interaction with ...
BELL S.R.L.
Bore: 40 mm - 320 mm
Pressure: 25 MPa
Rod diameter: 20 mm - 220 mm
... Hydraulic Cylinder, Hydraulic Cylinder for metallurgical equipment, Hydraulic Cylinder For Industry and Thin Hydraulic Cylinder, etc. DGR-CD250 series used in the metallurgical ...
Stroke : 320, 400, 500, 640, 720 mm
Bore: 40 mm - 250 mm
Pressure: 16 MPa
... Engineering Hydraulic Cylinders Hydraulic Equipment includes Engineering Hydraulic Cylinder, Hydraulic Cylinder for metallurgical equipment, Hydraulic Cylinder For Industry ...
... mode of action, it can be divided into two types: double acting and single acting. Hydraulic Cylinder Selection Determine the degree of corrosion and dust prevention ...
Stroke : 50 mm - 200 mm
Pressure: 250 bar
Force: 12 kN
Cylinders are on stock – we deliver in 1-3 days Hydraulic cylinder – Ø25 – Double acting – Fixed eye Materials: • - Cylinder tube: ST52,3 DIN 2393 ...
Taon Hydraulik Komponenter ApS
Stroke : 50 mm
Pressure: 250 bar
Force: max 20.0 kN
Cylinders are on stock – we deliver in 1-3 days Hydraulic cylinder – Ø32 – Double acting – Spherical ram eye – Stoke 50 mm. - Painted Materials: • - Cylinder ...
Taon Hydraulik Komponenter ApS
Stroke : 50 mm - 500 mm
Pressure: 250 bar
Force: 20 kN
Cylinders are on stock – we deliver in 1-3 days Hydraulic cylinder – Ø32 – Double acting – Spherical ram eye – Stoke 50 mm. - Painted Materials: • - Cylinder ...
Taon Hydraulik Komponenter ApS
Stroke : 0 mm - 200 mm
Pressure: 460 bar
Rod diameter: 10 mm - 125 mm
Type 57 cylinders have an extremely short overall length and are particularly suitable for short strokes. The block cylinders in special design offer the possibility for the direct attachment of valves ...
HYDROPNEU
Pressure: 250 bar
Rod diameter: 32 mm
Speed: 0.5 m/s
... in-house and standard series of cylinders are not fulfilling your needs; therefore we can react to your constructive characteristics and wishes with our special mounting types and shapes. We will build and assemble a ...
HYDROPNEU
Stroke : 0 mm - 1,000 mm
Pressure: 160 bar
Rod diameter: 28 mm - 110 mm
Hydraulic cylinders are basically meant to be linear actuators, which should only be used as these. One exception is our hydraulic cylinder with an external guidance. We are building these cylinders ...
HYDROPNEU
Stroke : 17, 25, 30, 40, 50 mm
Lifting Cylinder Vacuum lifting cylinders can be connected to a vacuum generator (ejector or vacuum pump). With a 3 way value mounted close to the lift cylinder, the vacuum is turned ...
Stroke : 20 mm - 50 mm
Bore: 20 mm - 50 mm
Pressure: 160 bar
... Caracteristics The CC short-stroke hydraulic cylinders can meet the need for small-sized presses. The main feature of these cylinders is their reduced overall dimensions, compared with ISO cylinders, ...
Stroke : 0 mm - 1,000 mm
Bore: 50, 63 mm
Pressure: 1 bar - 10 bar
... without any air-oil contact; the versions listed below are available: - adjustment with rod out - adjustment with rod in - double adjustment All versions can be provided with a speed control device: - quick approach ...
Stroke : 0 mm - 100 mm
Bore: 20 mm - 80 mm
Pressure: 50 bar - 207 bar
Stroke : 15, 20, 8.5 mm
Force: 12 N - 25 N
Speed: 0 m/s - 0.67 m/s
Adjustable hydraulic deceleration with pneumatic piston return Masses up to 1.200 kg and speeds up to 40 m/min Precise deceleration and singulation of pallets Housing: aluminium, black anodized, Stop: nickel plated Hardened stop Sensor ...
Stroke : 200 mm
Pressure: 0 bar - 200 bar
Rod diameter: 25 mm - 80 mm
SR20 VZ stainless steel hydraulic cylinder. Standard eye, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless steels, but we also emphasis their clean surfaces, ...
SSH Stainless
Stroke : 200 mm
Pressure: 0 bar - 200 bar
Rod diameter: 32, 63, 80, 40, 50 mm
SR20 LL stainless steel hydraulic cylinder. Standard eye, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless steels, but we also emphasis their clean surfaces, ...
SSH Stainless
Stroke : 200 mm
Pressure: 0 bar - 200 bar
Rod diameter: 25 mm - 80 mm
... steel hydraulic cylinder.POM bushing, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless steels, but we also emphasis their clean surfaces, smooth assemblies ...
SSH Stainless
... experience in the manufacture or repair and installation of hydraulic cylinders. Use this experience to your advantage and get a comprehensive service from one source. All cylinders and components are ...
Speed: 0.5 m/s
Double acting cylinders constructed in compliance with ISO 6020-2 and DIN 24554. The compact design of the square ends with tie rods plus the high quality material and seals render these ...
Duplomatic Oleodinamica
Stroke : 0 mm - 6,000 mm
Tie rods hydraulic cylinder, in compliance with the ISO 6020/2 standard, also available with magnetic sensors. All standard ISO mountings are available, in different seals configurations. All cylinders ...
CONFORTI OLEODINAMICA
Stroke : 75 mm - 350 mm
Force: 60 N
Torque: 60,000 Nm
A complete range of very high precision brushless electric cylinders 3 sizes available Speed up to 800 mm/s High precision 25 µm Satellite roller screws Integrated brushless motorization Extreme durability
Stroke : 150 mm
Force: 54 kN - 104.6 kN
Unit is made of hardened high strength light alloy. Can be used in wet conditions. Tool comprises : 1 Double action cylinder 1 Ergonomically shaped control handle with integral safety device ...
HYDR'AM
Stroke : 27 mm - 40 mm
... good corrosion resistance; 4. The buffer adjustment of cylinder is smooth and steady; 5. Cylinders and accessories for installation with several specifications are optional.
Airtac Automatic Industrial
Stroke : 5 mm - 80 mm
CU series short stroke cylinders. According to project U.N.I.T.O.P. - RUP/7 Bores from 16 to 100mm, with magnetic piston single and double acting with end stroke elastic cushions.
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
CK Series (Norma ISO 6432) Miniature cylinders single and double acting Available in standard and magnetic versions.Pneumatic end of stroke cushions for the bores 20 and 25.
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
CKP Series Miniature cylinders double ended piston rod. Available in standard and magnetic versions. Pneumatic end of stroke cushions for the gores 20 and 25.
Bonesi Pneumatik s.r.l.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining