Other clamping elements

Clamping force: 40 N

Pneumatic Pin Holding Clamp is an automated quick fastener with air. Ideal for frequent changeover of tooling, plate and fixture in machinery. Pneumatic Pin Holding Clamp reduces your setup time in semiconductor manufacturing/food processing/pharmaceutical ...

Clamping force: 1,100 N - 3,500 N

Manual swing clamp for quick workpiece setups without using tools. The clamp arm swings into position over the workpiece and clamps straight down just by turning the handle. Spiral cam provides quick clamping with maximum 3500N. Ideal ...

Clamping force: 150 N - 650 N

SPRING SWING CLAMPS Handle clicks at the clamping endpoint. -Feature- ・Turn the handle after the arm swings into position, the cam shaft rotates along the guide pin to push down the arm. The clamping spindle contacts the workpiece ...

Clamping elements GN 826 are normally used in connection with control knobs and smaller handwheels. Spindles can so be clamped gently and easily and without much construction and installation effort. The clamping wedge stiffens the spindle, ...

With side clamps GN 9190, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against fixed stops and the supporting surface. The clamping ...

Clamping force: 10, 5 kN

Down-thrust clamps GN 9192 are compact clamping elements for quick and secure clamping in tool and fixture construction. Rotating and tightening the clamping screw or the adjustable hand lever moves the clamping arm downwards to clamp ...

Advantages: - Very high retaining forces of 30–49 kN. - Low height. - Simple element assembly. - Enables very fast, simple clamping. - Infinitely adjustable height and length. - Use in 14-28 mm T-slots or M12, M16, M20 grid systems. - ...

Clamping force: 2 kN - 38 kN

Material: Carbon steel, tempered. Version: Form A-C: black oxidised. Shaft diameter ground. Form D: black oxidised.Note:The stated clamping forces (F max.) and tightening torques are valid within the stated clamping ranges (H5). Advantages: Compact ...

Material: Steel. Housing thermoplastic. Ball knob thermoset PF 31. Accessories steel. Version: Black oxidised. Housing black. Ball knob, red. Accessories black oxidised.Note:The travel path is 10 mm. Self-locking occurs in ...

Renishaw Equator™ fixturing enables quick and easy fixture set-ups to be created regardless of the size, geometry or material of the part. Modular and custom fixturing for your Equator™ gauging system: Renishaw Equator™ fixtures ...

The Renishaw CMM fixtures range includes a wide choice of standard size base plates and an extensive selection of components with M4, M6 or M8 threaded fittings. Whether you are inspecting parts for aerospace, automotive, electronics, ...

Renishaw's vision fixtures and acrylic base plates allow for back lighting and a clear, clean look at the part from your vision system and multi-sensor machines. Vision fixtures: Renishaw's vision fixtures offer two unique fixturing ...

ZPH pipe clamps are specially designed for the quick and easy instalment of disc nozzles onto pipes. These clamps are very convenient as there’s no need to buy expensive metal tips or welded nozzle tips. You must drill a 19 mm diameter ...

ZPF swivel clamps are specially designed for HGQ, RGN and ZBA series. To install them on pipes all you need is drill a hole, insert the nozzle clamp inside and fasten it with a simple screwdriver. The nozzle clamp body is in PP chemically ...

ZPQ cam and lever clamps are specially designed for HGQ, RGN and ZBA ball nozzles. Only three steps to install them on a pipe: drill a hole, wrap the cam around the pipe and pull the lever down to block it. No need of tools. The body ...

Clamping force: 10 kN - 110 kN

One of our newest low-profile clamp designs posses two jaws with hard tungsten carbide coating These workholding clamps are an excellent choice when: - Clearly visible clamping marks are not allowed in the workpiece but high ...

The function of this unit is simple: the back jaw of a clamp is pushing the plate back, so front jaw of the clamp and a stopper module are clamping the workpiece, It is important to understand the floating fixture principle in general: - ...

Clamping force: 110, 25, 65 kN

The smooth jaw workholding clamps are specifically engineered to securely hold your workpiece without leaving any visible marks or scratches. Our smooth jaw clamps are among OK-VISE’s oldest designs and remain a popular choice due ...

Technical data The fast-clamp driving dogs are used to pull the workpiece when it is fixed between two drills. They are highly useful in mass grinding processes. In fact, their high-speed opening and closing allows a significant reduction ...

Designed for holding insulated cables and wire. The sample is secured by the cam, which self-tightens as a load is applied and spreads the load evenly. Serrated cams are preferred for materials which may be slippy and so need a 'bite' ...

Each charger, booster or starter comes with a pair of clamps suitable for the device’s wattage. As the battery-charging clamps will wear out faster than the equipment to which they are fitted, GYS sells replacement clamps. These items ...

Each charger, booster or starter comes with a pair of clamps suitable for the device’s wattage. As the battery-charging clamps will wear out faster than the equipment to they are fitted, GYS sells replacement clamps. These items are sold ...

Each charger, booster or starter comes with a pair of clamps suitable for the device’s wattage. As the battery-charging clamps will wear out faster than the equipment to which they are fitted, GYS sells replacement clamps. These items ...

The hydraulically-operated bore clamp is particularly suitable for clamping in workpieces with smooth bore holes in the support surface ranging from 8 to 12 mm in diameter. The workpiece is put directly onto the hardened surface of the ...

Clamping force: 1.3 kN

Mini compact clamp Advantages ● Minimum dimensions (Ø 22 mm) ● Partially immersed body ● Space-saving integration by a patented fixing principle ● Housing can be rotated by 360° ● Mounting without pipes ● Workpiece clamping without ...

Clamping force: 2 kN - 22.8 kN

Swing clamps with sturdy swing mechanism Advantages ● 4 sizes available ● Compact design partially recessible ● Very high clamping force already at 70 bar/120 bar ● Sturdy swing mechanism ● Very short clamping time ● Insensitive ...

The permanent clamping magnets MSB are used for clamping of shaped parts and grinding of cemented carbide. Applications - For clamping of shaped parts - For grinding of cemented carbide (type SmCo) Features - Permanently magnetic - ...

The clamping magnets SPM belong to useful accessories for clamping of small parts. Applications - Ideal for grinding and electric discharge machining, measuring and testing jobs - Small magnetic workpieces from 0.5 mm can be clamped Features - ...

Design: Pneumatic clamping station for setting time-optimised clamping on machine tables with groove spacing of 63, 100 and 125 mm. Fastening is via M12 socket head screws. At least two fitting bores are attached for alignment. The insertion ...

Pneumatic unlocking. Opening operating pressure: K10.3 min. 5 bar. K20.3 min. 4.5 bar. Steel, unhardened. Repeat accuracy < 0.005 mm. Pneumatic clamping station for setting time-optimised clamping on machine tables with groove ...

Perpendicularity: 0.01/200 mm Material: aluminum casting Alignment hole and centre hole: with hardened bushes in accordance with DIN 179 with clamping and base surface Base surface: with hole pattern according to table or drawing, suitable ...

Clamping force: 50,000 N

Rail anchors as parking brakes VULKAN rail anchors are used as parking brakes for rail connected equipment used in harsh and windy operating environments. Rail anchors are failsafe brakes with spring operation and hydraulic brake release. ...

Clamping force: 16 kN - 40 kN

Indipendent and mobile standard sections vises. Extreme versatility and independence Gerardi Modular Elements allow you perfect clamping even of big workpieces which need the heaviest machining using the machine table as surface. Modular ...

Rigid clamp for fixing to all profiles Standard with pivoting Slot nut and screws

Adjustable clamps for fixing to all profiles Standard with pivoting Slot nut and screws

Available for M8-M36 You can use a clamping flange made of nickel-plated steel to connect the shock absorber to the structure more easily. After being fully screwed in, the shock absorber is clamped tightly to the clamping flange, which ...

The adapter plate represents the modularity and versatility of the zero point clamping system. It can be used to switch from the large 96 mm grid dimension to the small 52 mm grid dimension if the user has not only large but also small ...

The modular concept of the Quick-Point system allows to change quick and easy from the 96 to 52 mm grid via these adapter plates.

The 4-fold grid plate 96 can be described as THE “base plate” of incomparable quality. And not without good reason! Thanks to the multitude of locating options, its versatility and the expansion possibilities it has to offer, it is often ...

Low magnetic fieldWaterproof constructionRugged constructionForce: 70 N/cm²Longer lifeWith ON/OFF switch . 4 workholding faces . With ON/Off mechanism Use : ControlEDMGrindingMachining Magnetic field height : 2 mm Admissible wear of top ...

Low magnetic fieldWaterproof constructionRugged constructionForce: 50 N/cm²Longer lifeWith ON/OFF switch . 3 workholding faces . With ON/Off mechanism Use : ControlEDMGrinding Magnetic field height : 2 mm Admissible wear of top plate ...

Low magnetic fieldWaterproof constructionRugged constructionForce: 100 N/cm²Longer lifeWith ON/OFF switch . 3 workholding faces . With ON/Off mechanism Use : ControlEDMGrinding Magnetic field height : 4 mm Admissible wear of top plate ...

EASYCLAMP -a Popular clamp tool for plastic injection molding in Japan- Quick yet reliable mold replacement is realized thanks to its unique structure. One type of EASYCLAMP can fit 4 different heights just turning the block. As we ...

Well thought-out and easy to handle, robust and tried and tested.

Well thought-out and easy to handle, robust and tried and tested.

Well thought-out and easy to handle, robust and tried and tested.

Materials: flexible PVC Colours: transparent (indoor use) black - grey - yellow (outdoor use) Temperatures of use: -20 to +60°C Hardness Shore A: 85 ±5 Tensile strength at break: >20 MPa Ultimate elongation: 300 % Dielectric strength: ...

Material: nitrile rubber Colour: black Temperatures of use: -20 to +85°C Tensile strength: > 14 MPa Ultimate elongation: 400 % Chemical resistance: • good resistance to solvents • good resistance to ozone • good resistance to ...

Clamping force: max 120.0 kN

• side operation • low profile • with through-hole thread

Clamping force: 250, 80, 40, 180, 140 kN

SC – power clamping screw • wedge mechanism as force booster • high clamping force - low tightening torque • high operation safety • simple manual operation

Clamping force: 60 kN - 200 kN

• high clamping forces - low tightening torques • with bottomed thread - thread protected • centered operation • compact design - up to 200° C (optional up to 400°C)

3-sided magnetic block, 2 of which have a 'V' of 90º. Totally watertight.

B TYPE (ALUMINUM ALLOY BODY) Product Description Model No. LD-30B / LD-40B / LD-50B Vertical and horizontal configuration. Applicable to BT, CAT, DIN tapers.

Swivel clamps LKF of die-cast aluminum have a smooth fastening lug. The fastening lug is centered and situated at an angle of 90° to the flange face. The flange with two bores serves as an interface or for fastening the clamp to ...

Swivel clamps LKF of precision-cast stainless steel have a smooth fastening lug. The fastening lug is centered and situated at an angle of 90° to the flange face. The flange with two bores serves as an interface or for fastening ...