Torque: 590 Nm - 8,500 Nm
... lubrication. 5.Wide range of options Support a wide range of options such as reinforced plastic spacers, shaft coupling in Power-Locks, and flange attachments. 6.Environmentally friendly Comply ...
Torque: 22 Nm - 5,000 Nm
Rotational speed: 3,000 rpm - 13,900 rpm
... Spindle lifting units Linear units Packaging machines Machine tools Special machines Series CKN Metal bellows coupling with flange
Torque: 6,980 Nm - 2,440,400 Nm
Flange Coupling TNF 5571 RINGFEDER® Flange Couplings are the better alternative to press fits. Neither additional components such as keyways or wedges, nor a warming ...
Torque: 270 Nm - 355,000 Nm
... piece design with single taper has flange to position the component on the shaft to maintain axial position during mounting. Characteristics Has all positive features of series 7003. However, through the bigger flange ...
Torque: 7 Nm - 66 Nm
... rigid joint. When dismantling, one or if necessary, two of the screws are moved to the threaded dismantling holes in the flange. By tightening, the sleeves will separate and the joint will loosen. ETP-MINI R has one ...
Torque: 55 Nm - 15,500 Nm
... consists of a double-walled hardened steel sleeve filled with a specially adopted pressure medium, sealing ring, piston, pressure flange and clamping screws. OPERATION When tightening the screws the sleeve expands ...
Torque: 2,400 Nm - 338,000 Nm
... a hydromechanical joint, which consists of a double-walled steel sleeve, which encloses a conical moveable piston. In the flange there are three threaded connections (”ON”, ”P” and ”OFF”) in the radial direction and ...
Torque: 1,320 Nm - 8,730 Nm
Rotational speed: 1,650 rpm - 3,150 rpm
... built-in length of the coupling Possibility of removing the elastic elements without having to disconnect the machinery High shock loads damping capacity Tailor-made solutions Shaft to shaft or shaft ...
Torque: 23.88 Nm - 300,000 Nm
Rotational speed: 3,300 rpm - 11,000 rpm
... of anti-static, flameproof couplings is able to accept angular, radial and axial misalignment, they are torsionally resilient, non-lubricating and capable of operating between temperatures of 50°C and +105°C. These ...
Torque: 1.5 Nm - 696 Nm
Rotational speed: 240 rpm - 700 rpm
... but does require an increase to the overall length of coupling in order to accommodate. Coupling and clamping element assembly are supplied to suit specific metric shaft sizes. Clutch and Coupling ...
Torque: 170 Nm - 1,943,000 Nm
Type RCK 19 are normally referred to as Clamping Discs, used to clamp externally onto thin walled hubs to lock them to the shaft. The design permits the use of large diameter shafts with small hub sizes, and is popular ...
Torque: 0.15 Nm - 440 Nm
Rotational speed: 0 rpm - 20,000 rpm
... are 3 versions available like shaft to shaft, shaft to flange and flange to flange. From 0.15 - 440 Nm Rotation speed up to 20'000 rpm Temperatur range -40°C to +300°C Zero ...
Torque: 1.5 Nm - 7 Nm
Rotational speed: 8,000 rpm - 20,000 rpm
1.5 to 7 Nm Zero Backlash High flexibility Hubs in different adaptions available Bores up to 16mm
Torque: 0 Nm - 48,110 Nm
... tightening is critical and recessed mounting is not important (component mounts against the flange of the bushing). B-LOC B106 Series 190mm Keyless Bushing provides a zero-backlash frictional connection ...
Torque: 0 Nm - 44,378 Nm
... maintains exceptional concentricity and the ability to transmit bending loads. Since the B-LOC B103 Series Keyless Bushings do not have a flange, the external diameter along the unit’s entire length is ...
Torque: 0 Nm - 6,168.9717 Nm
... Applications that require a recessed installation of the bushing with no axial movement of the mounted component relative to the shaft during tightening. B-LOC B112 Series 2-3/8” Keyless Bushings ...
Torque: 10,000 Nm - 100,000 Nm
Flange mount hubs on both sides; 2x bellows with intermediate tube (Series 10 without intermediate tube); welded connection between hubs and bellows. Temperature range: -40° C to +300° C (-40° F to +572° F) Tolerance: Overall ...
Rigid coupling Clamp coupling DIN 115 Clamp coupling steel/ stainless steel one-piece/two-piece design Flange coupling DIN 116
Features Flanged version for general mechanical engineering applications requiring a flange to shaft connection
Your suggestions for improvement:
Receive updates on this section every two weeks.