- Hydraulics - Pneumatics >
- Valve >
- Check valve
Check valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.125 in
Pressure: 1,000 psi
Temperature: 32 °F - 230 °F
Check Valve, 1/8 Ports Notes Not intended for pressure relief Additional Information Air Flow 20 scfm @ 50 psig; 36 scfm @ 100 psig; 580 l/min @ 6 bar Force Cracks at approximately 1/2 psig Max PSI 0-300air/0-1000hyd Mount Direct ...
Clippard
Pressure: 1,000 psi
Featuring 1/8 ports, these NPT shuttle valves come in a gold colour and have a force of about 1/2 psig. At most these devices can manage 300 of air per 1000 hyd. These shuttle valves are unsuitable for ...
Clippard
Pressure: 250 psi
Temperature: 32 °F - 230 °F
Shuttle Valve, #10-32 Male Outlet, #10-32 Female Inlets Notes Shuttle valves should not be used as a pressure selector. Flow from "A" to "C" or "B " to "C". Additional ...
Clippard
DN: 0.25 in - 2 in
Check valves These one-way valves are made with bronze and brass with a seal in NBR nitrile rubber or, upon request, in Viton®, only for series 10 ... 11. To ensure a practical assembly ...
DN: 0.25, 0.375, 0.5, 1, 0.75 in
Membrane check valves These valves have the same features of the previously described check valves, but they are made with anodised aluminium, which ...
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
... broad choice of end configurations (variety of threads - BSPP and metric). Series 2000 is available with two valve options - Poppet valve or ball valve. This coupling system can be used ...
Parker Hannifin France SAS
DN: 0.125 in - 1 in
Pressure: 0 psi - 3,000 psi
Temperature: 100 °F - 400 °F
Parker's CB Series check and filter check valves are a unique ball check design. These check valves handle uni-directional flow control ...
Parker Hannifin France SAS
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
Parker's CO Series check valves are designed for uni-directional flow control of critical fluids and gases in industries such as pharmaceutical,research and microelectronics. Parker’s CO Series Check ...
Parker Hannifin France SAS
Flow rate: 38.3 l/min - 616.7 l/min
These check valves are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered. Thread size M5, G1/8, G1/4, G3/8, G1/2. Applications: - ...
DN: 5 mm - 25.4 mm
Pressure: 20 mbar - 25,000 mbar
Temperature: 0 °C - 80 °C
... chemical compatibility and operating temperatures extended. » Version for use with oxygen available Series VNR unidirectional valves are available in the Thread or Integrated Fitting version. Thanks to their construction ...
DN: 0.25, 0.125 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
This allow air flow in only one of the two directions. EAN code: - 8056686166792 Quantity per package: - 5 Minimum order quantity: - 5 Unit of measure: - items Thread type - Cylindrical Threaded port - 1/8"
DN: 8, 6, 4 mm
Pressure: 0.5 bar - 12 bar
Temperature: -20 °C - 60 °C
The VNR L check valve belongs to the LINE ON LINE® family, which means it can be connected to all the other components in series or in parallel. Available in the version for pipe-pipe connection with ...
DN: 0.125, 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
This allow air flow in only one of the two directions. EAN code: 8024986016567 Quantity per package: 10 Minimum order quantity: 10 Unit of measure: items Threaded port: 1/8"
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 200 l/min - 1,400 l/min
Stop valve with manual override option. • Valve function: piloted non-return function • Screw-in with external thread • Pneumatically piloted • Pilot air connection: M5, G1/8, G1/4, G3/8, QS-4 • ...
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: 140, 135 °C
The RUF Series Check Valve is used in places where a return flow of product in pipelines must be avoided. This check valve is utilized in brewery, dairy, chemical and ...
DN: 25 mm - 100 mm
The DELTA VPN check valve is used in places at which the reflux of liquids into the pipeline must be prevented. The valve opens through the pressure of the liquid against the spring-loaded ...
DN: 0.125 in - 1 in
Pressure: 0.5 bar - 12 bar
Temperature: -10 °C - 120 °C
Controllable valves for compressed air control For regulating the compressed air supply to consumers
BÜRKERT FLUID CONTROL SYSTEMS
DN: 4 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 55 °C
Two check valves are integrated in Type 0498. If this double pilot controlled check valve is combined with two 3/2-way valves, a 5/3-way function with ...
BÜRKERT FLUID CONTROL SYSTEMS
Pressure: 100,000 Pa - 700,000 Pa
Temperature: -5 °C - 60 °C
Flow rate: 3 l/min
Pilot Check Valve with State Detection • According to ISO 13849. • Solid state auto switch PNP: D-M9. • Lead wire connection : 500 mm and M8 connector. • Operating pressure range: 0.1 to 0.7 MPa. • ...
SMC
DN: 10, 6, 12, 8 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: -5 °C - 60 °C
• Pilot check valve, Metal Body Type • For drop prevention and temporary intermediate stops • Three female thread / one-touch fitting port combinations • Body sizes: 1/8, 1/4, 3/8, 1/2 • Applicable ...
SMC
DN: 1.3 mm - 54.9 mm
Pressure: 420, 500, 700 bar
Temperature: -40 °C - 80 °C
The check valve type RK and RB can be screwed in. The spring-loaded ball check valve type RK and RB is very robust and insensitive to soiling. The check ...
HAWE Hydraulik SE
Pressure: 700, 500 bar
Temperature: -40 °C - 80 °C
Flow rate: 20, 35 l/min
The check valve type RC can be screwed in. The spring-loaded plate valve type RC can be screwed-in in any direction and is particularly suitable for fast switching sequences. Features ...
HAWE Hydraulik SE
DN: 12.5 mm - 32 mm
Pressure: 500, 400, 450 bar
Temperature: -40 °C - 80 °C
The check valve type RE can be screwed in. Type RE is a plate valve without a spring. Type RE is suitable for isolating pressurising loads or as a foot valve for a ...
HAWE Hydraulik SE
DN: 5.5 mm - 8 mm
Pressure: 0 bar - 280 bar
Temperature: -40 °C - 149 °C
... variations offer unparalleled design flexibility. This threadless, cartridge-style, one-way valve offers higher flow capacity over our standard 558 Series valve. This valve features ...
THE LEE COMPANY
DN: 2.5 mm - 8 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 149 °C
... Press-In Check Valve fits into many common plastic fittings. Lastly, our new 855 LC2 Series Press-In Check Valve offers more than a 65% increase in flow capacity over ...
THE LEE COMPANY
DN: 8, 5.5, 6 mm
Pressure: 400, 280 bar
Temperature: -40 °C - 149 °C
Standard Lee shuttle valves are available in three models: a 5.5 mm, 2.1 GPM* model; an 8.0 mm, 4.8 GPM* version; and our new 400 Bar valve. The new 400 Bar Shuttle Valve is just 6 mm ...
THE LEE COMPANY
Pressure: 0.5 bar - 10 bar
Temperature: -20 °C - 80 °C
Enables air to be exhausted quickly from air reservoirs and cylinders Allows higher cylinder speeds to be achieved Simple, compact design and construction Very reliable in operation Medium: - Compressed Air Port size: ...
Norgren
Pressure: 0.7 bar - 10 bar
Temperature: -20 °C - 80 °C
... function Can be combined to operate from three or more sources Valves can be ganged together Medium: - Compressed Air Port size: - G1/4 Mounting: - Through holes in valve body
Norgren
DN: 6 mm
Pressure: 1 bar - 10 bar
Temperature: -20 °C - 80 °C
Easy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems Medium: - Compressed Air Thread: - G1/8
Norgren
DN: 0.125 in - 3 in
Pressure: 1,000 bar
... The check valves are available for inert/flammable gases and for oxygen and come complete with the seals suitable for the relevant medium. All check valves comply with ...
WEH GmbH Verbindungstechnik
DN: 3, 4, 5, 6 mm
Pressure: 0 bar - 250 bar
Temperature: -40 °C - 200 °C
WEH® Check Valve TVR200-S1 stainless steel, 0 - 250 bar - Product family The WEH® TVR200 Check valves made of stainless steel are ideal for applications with liquid ...
WEH GmbH Verbindungstechnik
DN: 10 mm - 20 mm
Pressure: 0 bar - 250 bar
Temperature: -20 °C - 200 °C
WEH® Check Valve TVR2-S1 stainless steel - Product family Thanks to their extreme leak tightness, the WEH® TVR2 check valves from stainless steel are perfectly suited ...
WEH GmbH Verbindungstechnik
DN: 0.5 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C
... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...
WITT-Gasetechnik
DN: 0.5, 1, 0.75 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C
... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...
WITT-Gasetechnik
DN: 1.5 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C
... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...
WITT-Gasetechnik
DN: 0.062, 0.25, 0.125, 0.18, 0.09 in
Pressure: 0 psi - 50 psi
Umbrella check valves are Air Logic's first-in-class robust innovation in low cracking force inline non-return valves. The plastic bodies with preloaded elastomer umbrellas are designed ...
AIR Logic
DN: 0.125, 0.06 in
Pressure: 0 psi - 10 psi
Miniature check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. ...
AIR Logic
DN: 0.17, 0.125, 0.063 in
Pressure: 0 psi - 75 psi
Temperature: 5 °C - 48 °C
Check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Floating ...
AIR Logic
DN: 0.25 in - 2 in
Pressure: 600 bar
Body - SUS316 orSUS304 Cap - SUS316 or SUS304 Disc Bonnet - SUS316 or SUS304 Spring - SUP 3 Thrust Washer - SUS316 or SUS304 Boit - SUS304 Disc - Teflon Gasket - Teflon
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting ASTM-A351 CF8M, Screwed Cap, Swing Type Disc, Intégral Seat. Body - CF8M Cap - CF8M Disc - CF8M Connecting Rod - CF8M Disc Nut - SUS316 Pin - SUS304 Boit Washer - Teflon Gasket - Teflon Boit - SUS304
DN: 0.88 mm - 1.01 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
Beswick Engineering Co, Inc.
DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
Beswick Engineering Co, Inc.
DN: 2, 0.125 mm
Pressure: 0 psi - 100 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
Beswick Engineering Co, Inc.
DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 200 °C
The O-Ring check valves are suitable for applications that require non-leakage sealing. It can be operated within the pressure of 1, 500 bar and is used for stopping the directional liquid and gas flow. ...
Maximator GmbH
DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 350 °C
The MAXIMATOR ball check valves can be used even with high temperatures. Their shut off liquids and gases up to a maximum pressure of 1,500 bar. All valves have collars and glands. The ...
Maximator GmbH
Pressure: 4,500 bar
Temperature: -20 °C - 200 °C
... O-Ring check valves are capable of shutting off directional flows of gases and fluids. They are incorporated with a leakage-resistant sealing feature. The O-Ring and Ball Check Valves ...
Maximator GmbH
DN: 6, 12, 10 mm
Pressure: 206 bar
Temperature: -20 °C - 190 °C
NO RETURN VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316 Inox 316
BENE INOX
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: 0 °C - 180 °C
SPRING LOADED 3 PIECES CHECK VALVE - FEMALE / FEMALE BSP OR NPT - STAINLESS STEEL 316
BENE INOX
DN: 25 mm - 104 mm
Pressure: 10 bar
Temperature: -20 °C - 130 °C
CHECK VALVE PLAIN ENDS - EPDM GASKETS - STAINLESS STEEL 316L Inox 316L
BENE INOX
DN: 0.25 in - 2 in
Pressure: 0 bar - 15.9 bar
Temperature: -18 °C - 93 °C
... high-quality Check Valves are specially manufactured in the U.S.A. by ANVER, for ANVER lifting systems. Versatile, one-way Check Valves work with nearly all of ANVER’s ...
DN: 50 mm - 300 mm
Pressure: 10 bar
Temperature: -30 °C - 180 °C
Sandwich construction for installation between flanges PN 10 (other pressure stages on request) Materials Body and plate PTFE/coal Sealing FEP-coated O-ring Product advantages Low weight Mounting position horizontal and vertical ...
GEFA Processtechnik
DN: 50 mm - 500 mm
Pressure: 10 bar
Temperature: -30 °C - 80 °C
Sandwich construction for installation between flanges PN 10 (other pressure stages on request) Materials Body and plate Polypropylene Sealing EPDM, NBR, FPM, PTFE Product advantages Low weight Mounting position horizontal and ...
GEFA Processtechnik
DN: 25 mm - 300 mm
Temperature: -20 °C - 100 °C
Swing check valve to DIN/EN with flanged ends, in straight-way pattern, full bore, body with coating or lining, slanted-seat design, static sealing to atmosphere; with soft rubber encapsulated pre-loaded ...
DN: 0.125, 0.25 in
Pressure: 5, 0.6 bar
Flow rate: 0 l/min - 340 l/min
Closes the vacuum line when ejectors are inactivate, thus maintaining the vacuum pressure within the system.
DN: 25.4 mm - 101.6 mm
Valves / Check Valves The 62B Air Blow Check Valves are "plug-style," where air pressure pushes the bonded rubber plug away from the seat. FEATURES In ...
DN: 38.1, 50.8, 63.5, 76.2 mm
Valves / Check Valves Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. FEATURES Product flow pushes the ball ...
DN: 25.4 mm - 101.6 mm
Pressure: 1 psi - 5.9 psi
Valves / Check Valves Stops or check reverse flow in a pipeline. FEATURES W45 Series In the absence of forward flow pressure, the electropolished spring returns ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining