Other heating and cooling equipment

Steam production: 5,200 kg/h

Bosch Steam boiler - Universal CSB The steam boiler CSBs low emissions already comply with future requirements of the MCP Directive (EU) 2015/2193. - Large output range from 300 to 23,600 kg/h for pressures ranging between 0.5 and ...

Bosch Electric steam boiler ELSB When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. - Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, ...

All DC inverter heat recovery series offers simultaneous cooling and heating operation in one system. All DC Inverter Scroll Compressor Technology Possibility to make simulatenously cooling and heating in same system Modular, compact ...

Power: 235 W - 800 W

PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.

Power: 8 W - 150 W

PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.

Power: 250 W - 8,000 W
Temperature: 350, 100 °C

Watlow’s new FLUENT in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around a tube as part of a thermal system. Watlow’s FLUENT heater is designed ...

Power: 0 W - 1,000 W
Temperature: 200 °C

Prevent Freezing and Condensation In Electrical and Mechanical Housings WATROD enclosure heaters are designed to prevent freezing and condensation in electrical and mechanical housings. The WATROD heater element is enclosed in a perforated, ...

Power: 0 kW - 225 kW
Temperature: -29 °C - 650 °C

Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted to many non-pressurized air-heating systems. Duct ...

Model 3210 Vortex Tube EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Temperatures, flows and cooling power can all be adjusted to produce temperatures from ...

Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

The industrial hot air device type 3000-E is the optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, for example in production machines. There are two versions of the air ...

Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

The Type 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air heater enables integration into expert production processes. The air ...

Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar

The industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration into professional production processes despite its high hot air output. The air ...

Through integration of the segmented disc valve technology, the desuperheater type 5090 is able to control steam pressure and temperature in the steam network easily. By using four injection nozzles and finely tuned water conditioning, ...

Pressure: 80 psi - 100 psi

Versatile Spot Cooling for Machining, Repair Shops and More Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F for numerous industrial spot cooling applications. With ...

Pressure: 80 psi

Versatile Spot Cooling for Machining, Repair Shops and More Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. ...

Pressure: 80 psi - 100 psi

The Frost Free Cold Air Gun eliminates the mess associated with condensation and frost arising from continuous use of a Cold Air Gun. A must–have for sensitive applications such as: Cutting, drilling or machining of paper products, ...

Power: 15 kW - 3,000 kW
Steam production: 20 kg/h - 4,500 kg/h

The GE is an electric steam generator conceived for small consumption, installation in clean environments or supplying high purity steam. It's main summed up characteristics are: Thanks to the experience accumulated over more than ...

Power: 15 kW - 3,300 kW
Steam production: 15 kg/h - 15,000 kg/h
Pressure: 3.3 bar

The GE INOX is an electric steam generator conceived for very small or small consumption, installation in clean environments or supplying high purity steam. It's main summed up characteristics are: Built with stanless steel AISI-316L •Thanks ...

Power: 38 kW
Steam production: 50 kg/h

The VL boiler is a clean steam generator that is horizontal. This boiler made of stainless steel uses dirtly steam, superheated water or thermal fluid to produce high purity steam. Its main features are the following: This equipment ...

The fire blankets are made of fire retardant glass fibre fabric and, together with portable fire extinguishers and hydrants, form an essential part of the fire-fighting equipment used in small domestic fires, as they suffocate flames ...

Temperature limit: 650 °C - 1,050 °C

Biotex® blankets reinforced with glass threads are made using Biotex® cloth and are available in standard sizes. Perfectly edged, on request they can be provided with steel eyelets. The Biotex® cloth is soft to the touch and resistant. ...

Temperature limit: 650 °C - 1,050 °C

Ceramic blankets reinforced with glass threads are made using Ceramic cloth and are available in standard sizes. Perfectly edged, on request they can be provided with steel eyelets. The Ceramic cloth is soft to the touch and resistant. ...

In the field of biomaterials, mechanical test is needed to be performed in a temperature controlled fluid bath, to reflect the physiological conditions of the body. Stents made of Nitinol have to be tested in a temperature controlled ...

Power: 20 W - 40 W

Compact heater for the protection of electrical and electronic components in enclosures. Its design ensures great convection resulting in excellent heat dissipation. A touch-safe plastic cover provides for low surface temperatures on ...

Power: 10 W - 50 W
Temperature: -45 °C - 70 °C

Compact heater with PTC heating elements for heating enclosures with electrical or electronic components. The heater prevents too low temperatures and thus condensation harming the components. The design of the aluminium profile creates ...

Power: 50 W - 150 W
Temperature: -45 °C - 70 °C

Compact loop heater for heating enclosures with electrical and electronic components. Its design ensures great convection resulting in excellent heat dissipation. Touch-safe plastic housing minimises surface temperatures to 80 °C. Also ...

Band heaters are designed with micanite or ceramic insulation sheathed with brass or stainless steel plate. Ceramic band heaters are chracterised by the excellent insulation properties and the long-lasting period of operation. Band ...

Power: 100 W - 10,000 W

Heating / cooling units ZGH type are heaters used to plasticize plastics. The construction of the extruder is based on ceramic heating inserts equipped with brass / steel heat sinks, the whole is closed in a steel housing. A fan is mounted ...

Heat transfer systems use either thermal oil, water or water/glycol as the heat transfer fluid depending on the outflow temperature. They are electrically heated and produce a controlled liquid flow. Heating and cooling systems from the ...

Heat transfer systems use either thermal oil, water or water/glycol as the heat transfer fluid depending on the outflow temperature. They are electrically heated and produce a controlled liquid flow. Heating and cooling systems from the ...

Power: 650 kW

In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would ...

In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would ...

Circulation Heaters, also known as “in line heaters,” have uses in many applications. They can use steel, stainless steel, or titanium depending on the application. Lube oil and waste oil applications often use steel for circulation heaters. ...

These types of water heaters are designed and manufactured for preheating and maintaining a constant water temperature in water-cooled endothermic engines. They are in fact applied in series with their normal cooling circuit. An adjustable ...

- Power supply = 230V 50/60Hz M. - Power consumption = 400W/700W/900W - Max temperature = 55°C - ED% duty = 100%

- Power supply = 230V 50/60Hz M. - Power consumption = 1200W/3000W - Max temperature = 80°C (adjustable) - ED% duty = 100%

Power: 0 kW - 2 kW
Temperature: 650 °C
Pressure: 0 bar - 6 bar

Housing made from stainless steel; connection chromedbrass Length of the connection cable and thermocouple line 1,5 mtr. Air hose available per meter Other voltage available on request 24 month warranty (except wear parts)

Power: 0 kW - 1 kW
Temperature: 0 °C - 600 °C

The short one for direct installation! With mounting thread directly in the housing. Smallest installation height despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage ...

Power: 0 kW - 1 kW
Temperature: 600 °C

Different voltages, power and special versions, such as external activation via controller or SPS possible. Available on request!!! Special accessories on request!!! - 24 month warranty (except wear parts) Voltage [VAC] ...

The TC 200 Series of Heating Table is manufactured by Borel Switzerland, and is specifically designed for all industrial applications. This device is constructed with welded chassis and aluminum tray. It ca generate with a power supply ...

The TC 300 Series of Heating Table is manufactured by Borel Switzerland, and is specifically designed for all industrial applications. This device is constructed with welded chassis and aluminum tray. It ca generate with a power supply ...

Power: 15.5, 2 kW
Steam production: 2 kg/h - 20 kg/h
Empty weight: 19.6, 12.9 kg

The steam generator for steam showers, private and semi-professional steam baths. Optionally available with integrated spa control for simultaneous and independent control of steam bath and sauna. Compact construction form – reliable ...

Power: 3.8 kW - 60 kW
Steam production: 5 kg/h - 80 kg/h
Empty weight: 40, 66, 132 kg

Condair Omega Pro steam humidifiers are optimized for use with demineralized water and drinking water. The design features employed ensure outstanding reliability in use, precise control, and simple operation. The units are the result ...

Steam production: 422 kg/h - 6,584 kg/h
Empty weight: 13, 24, 30, 65 kg

Steam baths with hygienic steam The Sigma generates sterilized, hygienic, odour-free steam. Available with seven practical power levels and in two different sizes, the Condair Sigma produces between 4 and 65 kg of steam per hour. Durable ...

Temperature limit: 1,400 °C

ZIRCAR Refractory Composites, Inc. insulating blankets are non woven, inorganic, fiber-based products that contain no asbestos. They are engineered for use as thermal barrier materials in high temperature applications up to 1260°C ...

ZIRCAR Silica Blanket Type SB-2000 is a high temperature insulation blanket made of mechanically interlocked continuous filament amorphous silica fibers with useful properties to temperatures of 1100°C (2012°F). SB-2000 is a strong ...