Linear units

Stroke : 14 m

Mechbelt TM is a belt-driven linear unit for 1, 2 or 3 linear movements of up to 14 metres in both horizontal and vertical directions. With dual-mounted units, loads ...

Stroke : 5,500 mm
Speed: 2.5 m/s

KUKA linear unit KL 100 The KUKA linear unit KL 100 is a self-contained, one-axis linear unit mounted on the floor, ceiling or wall. ...

KUKA linear unit KL 250-3 KUKA linear units are translational motion units Linear units can be used to extend a robot’s ...

KUKA linear unit KL 1000-2 The KL 1000-2 is a self-contained, floor-mounted KUKA linear unit. It is operated as the external axis of a robot. Control is thus executed ...

... trapezoidal string, soak string or toothed cinch, this grease free linear axles were decisive factors in picking a suitable individual result that is from lightweight strong plastic units or up to massive ...

Stroke : 0 mm - 3,000 mm

... . This unit is insensitive to dirt because particles will not get stuck on any moving parts. The axis has a better degree of ruggedness for more functions. The user can choose between basic and standard controls based ...

Stroke : 4,000, 6,000, 3,000 mm
Force: 200, 600, 1,000 N
Speed: 1, 1.25, 1.6 m/s

... Movoparts): Slide Guided, Screw Driven Linear Units Thomson's Movopart® MG-K rodless actuator slides provide guided linear motion through a ball screw ...

Stroke : 5,000, 7,000, 12,000 mm
Force: 600, 1,000, 200, 350 N
Speed: 5 m/s

... Movoparts): Slide Guided, Belt Driven Linear Units Thomson's Movopart® MG-B rodless actuator, slide guided versions are designed to move light loads at medium application ...

Stroke : 3,000, 4,000, 6,000 mm
Force: 200, 600, 1,000 N
Speed: 1.6, 1, 1.25 m/s

MF-K (Movoparts): Ball Guided, Screw Driven Linear Units Thomson's Movopart® MF rodless actuator slides provide guided linear motion through a ball screw drive and a ...

Stroke : 50 mm - 500 mm
Speed: 800 mm/s

With the adoption of oil-free seals in the LM guides and the ball screws, the BA-III series does not require maintenance for an extended period of time. Equipped with a compact AC servo motor, the total axial length has been shortened. ...

Stroke : 50 mm - 700 mm
Speed: 800 mm/s

With the adoption of oil-free seals in the LM guides and the ball screws, the BA-III series does not require maintenance for an extended period of time. Equipped with a compact AC servo motor, the total axial length has been shortened. ...

Stroke : 50 mm - 150 mm
Speed: 600 mm/s

With the adoption of oil-free seals in the LM guides and the ball screws, the BA-III series does not require maintenance for an extended period of time. Equipped with a compact AC servo motor, the total axial length has been shortened. ...

Stroke : 15 mm - 450 mm
Force: 90 N - 260 N

... operation. The linear units are available in two versions: • version A comes with a retracted position and an adjustable extended position; • version B is designed to achieve a second supplementary adjustable ...

The linear unit iLE 20/20 is based on a sophisticated linear technology, which has been continuously developed by many years of experience and numerous specific customer requirements. ...

Speed: 4.5 m/s

LINEAR TRACK - ILD SERIES WITH LINEAR MOTORS SKU iLD-50-6 als Linear Track Delivery Time 2-3 Tage Maximum speed up to 4.5 m/s Maximum accekeration up to 10 m/s ² Overall lengths ...

Stroke : 490 mm - 2,990 mm
Speed: 0.031 m/s - 1.3 m/s

... precision steel shafts Ø 12 h6, material Cf 53, Hardness 60 ± 2 HRC Aluminium shaft slides WS 5/70, 2 x WS 5/70 (70 mm long), adjustable for no play, central lubrication system Drive

Stroke : 5 mm - 100 mm

Stroke : 25 mm - 100 mm

Force: 50 N - 9,100 N

... /EPX 40 linear units feature higher precision and lower tolerances of the mounting surfaces, and these units are suitable to use for the occasional or frequent movement and positioning ...

Stroke : 50 mm - 7,722 mm
Force: 50 N - 4,100 N
Speed: 0 m/s - 2 m/s

RK DuoLine Clean linear actuators for use in cleanrooms ◾All external steel parts nickel-plated or made of stainless steel ◾Suitability according to EN ISO 14644 -1 for clean rooms ◾Optionally with or without vacuum ...

Stroke : 50 mm - 5,898 mm
Force: 50 N - 2,550 N
Speed: max 10.0 m/s

The PLZ series is a linear drive unit with toothed-belt drive. It is specially designed with an aluminum enclosure that is equipped with holding measures. These holding measures are created for the guide ...

KERK® RGS/RSW Linear Guide series are built to provide solid and steady platform for a wide range of liner motion applications. It is crafted from high quality extruded aluminum and Kerkite® composite polymer with Kerkote® ...

Stroke : 0 mm - 2,740 mm

... lubrication points for the ball screw return reduce maintenance time. Bellows covers are also available to further protect the unit in harsh environments.

Force: 3,100 N - 28,000 N

... Heavy Duty Linear System The HDLS from HepcoMotion utilizes heavy duty slides and is actuated by an AT series belt. Narrow and wide unit versions are available. The narrow unit ...

Stroke : 25, 50 mm
Force: 30 N - 100 N

Precise profile guide The linear guide with ball bearing circulation and scrapers provides high precision and rigidity Standardised adapter plate Reduce your manufacturing effort and ensure standardisation for your ...

Stroke : 50, 100 mm
Force: 265, 220 N

Precise profile guide The linear guide with ball bearing circulation and scrapers provides high precision and rigidity Dampened end position By using PowerStop shock absorbers, you can gently move up to the end positions, ...

Stroke : 50, 100, 200 mm
Force: 220, 265, 680, 750 N

Precise double rail profile guide The linear guide with ball bearing circulation and scrapers provides high precision and rigidity Dampened end position By using PowerStop shock absorbers, you can gently move up ...

Stroke : 100 mm - 1,000 mm
Force: 10 kgf - 25 kgf
Speed: 40 mm/s - 250 mm/s

【Technical Feature】 FSL40 linear guide is semi-sealer structure, body width 40mm, high stability,compact structure,versatility feature, suitable for normal working environment, it is convenient to use single axis ...

Stroke : 50 mm - 1,000 mm
Force: 10 kgf - 25 kgf
Speed: 55 mm/s - 250 mm/s

【Technical Feature】 FSL40 linear guide is semi-sealer structure, body width 40mm, high stability,compact structure,versatility feature, suitable for normal working environment, it is convenient to use single axis ...

Stroke : 0 mm - 300 mm
Speed: 0 mm/s - 300 mm/s

【Technical Feature】 FSL30 Series are trapezoidal rods ball screw linear guides. With delicate design and strong practicability, FSL30 is the best choice for customers who require compact, light and micro modules. 【Range ...

... precise and durable guiding lines are vibration-reducing and insensitive against impacts and environmental influences. The slide bushings and the spindle nuts be suited for dry operation. For higher load, we recommand ...

Group with trapezoidal screw for manual or motorised horizontal movements with mechanical or electrical position indicator. The Simple “B” models have integral bronze supports of minimal dimensions (without dust protection). Economical ...

Group with rotating trapezoidal screw and supports with reduced dimensions, (without dust cups) for medium/long manual or motorised movements with mechanical or electronic position indicator. Group C/DVAB+LVZ with medium/long screw, ...

Group with rotating trapezoidal screw and supports with reduced dimensions, (without dust cups) for short manual or motorised movements with mechanical or electronic position indicator. Group C/DVA+LVZ with short screw, allows the ...

... slides. The adjustable slide is a high quality guide system capable of supporting a heavy load. It is a complete system that incorporates a precision micrometer control knob for accurate positioning of the slide. Domino ...

Stroke : 50 mm - 200 mm
Force: 1,760, 1,000, 440, 250 N
Speed: 100 mm/s

The displacement units of the range 80 are linear displacement units with column guides and ball bushings which allow strokes with amplitudes between 50 and 200 mm. Fully machined construction ...

Stroke : 10 mm - 400 mm
Force: 28 N - 270 N
Speed: 0.1 m/s - 1 m/s

These linear units are ready to receive your standard cylinder with detectors, flow regulators and your hydraulic shock absorbers. By adding these components of the supplier of your choice, you obtain ...

Stroke : 3,000 mm - 30,000 mm
Force: 0 N - 1,000 N
Speed: 1.5 m/s

Liner Motion STANDARD Medium payload series for articulated loads up to 1.000 kgs. Suitable for arc welding and handling applications. Can handle up to 3 robots. Options: - Automatic lubrication - Welding power source carrier stand - ...

Stroke : 3,000 mm - 30,000 mm
Speed: 1.5 m/s

Liner Motion X-LARGE High payload series for articulated payloads up to 4.000 kgs and vertical payloads up to 5.000 kgs. Suitable for all kind of applications. Can handle up to 3 robots. Options: - Automatic lubrication - Welding ...

Stroke : 0.1 mm - 6,000 mm

... low speed and compact size. The motors on these units usually generate very low torque due to direct coupled connection to the screw. Based on the requirements of the specific applications these guide units ...

Stroke : 2,000 mm
Force: 7,000, 2,100 N

This motorizable linear guide from CTS Italy is applied to applications that are in need of a 0.1 mm worm drive screw precision. It is usable for operations that run at low speeds, and in tightened work areas. This ...

Stroke : 0 mm - 3,000 mm

... maximum vertical stroke in low height locations. Two overlapped guides go down simultaneously, controlled by one reduction unit and trasmission has been provided by belt AT10/25. Maximum loads and stroke are explained ...

Speed: 192,000, 162,000 mm/min

Our lightest model’s body frame is built of a rigid aluminum profile. This type of construction ensures a cost-efficient solution for short travel length, approximately up to X meter.

Speed: 192,000, 162,000 mm/min

The STN family’s smallest member, capable to carry up to 1000 kg useful payload. Its body structure is a unique, completely welded steel structure, ensures the low weight and rigidity, meanwhile providing a cost-efficient solution even ...

Speed: 192,000, 162,000 mm/min

The STKN family’s entry model, capable to carry up to 1000 kg useful payload. A fully covered version of the STN family. The steel structure is covered with a walkable upper plating, protecting the tracks internal components from falling ...

Stroke : 10 mm - 100 mm
Force: 1,750 N

ELE... ELECTRIC LINEAR UNIT Electric Linear Unit with base plate made of robust steel. Dual recirculating ball guides with 4 traversing carriages. Skid plate in steel ...

Essa are the Australian pioneers of a range of electric motor driven ball screw samplers that find particular application in collecting a representative samples from the material stream being discharged over the head pulley of a belt ...

Essa are the Australian pioneers of a range of electric motor driven ball screw samplers that find particular application in collecting a representative samples from the material stream being discharged over the head pulley of a belt ...

Essa are the Australian pioneers of a range of electric motor driven ball screw samplers that find particular application in collecting a representative samples from the material stream being discharged over the head pulley of a belt ...

Stroke : 1,500 mm - 3,800 mm

Available in the variants with toothed belt drive (FMB) or with ball screw drive (FMS) The ready-to-install linear modules with freely configurable length can be used universally. They are available in the variants with ...

Norgren Express' Slide Actuator Units are high-grade sliding bearing units which guarantee a prolonged lifespan, as well as an extensive range of guidance levels. It features a dual-piston ...