Metal endmills

Diameter : 0.2 mm - 1 mm

... stainless steels, structural steels, cast iron, non-ferrous metals and titanium alloys; geometry SX for heat-resistant alloys (e.g. Inconel, Monel, Nilo, Hastelloy) and CoCr alloys. This micro-endmill ...

Diameter : 1 mm - 8 mm

... maximum milling depths of up to 2 x d, a medium one up to 3 x d and a long one up to 5 x d. The cutting length for these end mill cutters is 2 x d. Additionally two more versions with progressive flute-angle and milling ...

Diameter : 0.3 mm - 6.35 mm

... up to 3 x d and a long one up to 5 x d. The cutting length for all three is 1.5 x d. CrazyMill Cool Z2, a solid carbide end mill cutter with through-tool cooling in the diameter range of 0.3 to 6.35 mm (.0118" - .250", ...

Diameter : 6 mm - 16 mm
Length: 65 mm - 115 mm

– Cost-effective finishing (up to 90% faster than with ball-nose end mills) – Higher productivity thanks to increased number of teeth – Tough and reliable (even with long overhangs) – High component precision

Diameter : 6 mm - 16 mm
Length: 65 mm - 115 mm

– Cost-effective finishing (up to 90% faster than with ball-nose end mills) – Higher productivity thanks to increased number of teeth – Tough and reliable (even with long overhangs) – High component precision

Diameter : 1 mm - 20 mm
Length: 57 mm - 154 mm

MonsterMill TCR End Milling Cutter with Corner Radius The MosterMill TCR has been developed for machining titanium parts. It is predestined for use in the area of medical technology and for the aerospace industry. The MonsterMill ...

Diameter : 12, 6, 10, 8 mm
Length: 90, 55, 80, 60 mm

Application: The PCD ball nose end mill is widely used for machining all kinds of curved surfaces and arc groove, such as nonferrous metals (copper, aluminum, zinc, titanium, etc.), ceramic, graphite ...

APPLICATIONS Worldia PCBN Face Milling Cutter with indexable inserts used for finishing on end milling of cast iron,it can satisfy the demand for surface roughness and geometric toklerances. Hardened steel Cast irons （Recommend） Sintered ...

Diameter : 2 mm - 20 mm

Solid Carbide End Mill 1824A Carbide end mill for roughing and finishing in all long-chipping materials. Product features and benefits: Special geometry enables best possible surface quality. TIALN ...

Diameter : 3 mm - 25 mm

Solid Carbide End Mill TOP-Cut “Enorm” 1999A TOP-Cut carbide end mill with lateral driving flat and long design for roughing and finishing in almost all materials. Product features and benefits: ENORM ...

Diameter : 0.4 mm - 2 mm

... cutting tools. SNSTC not only provides helical edge diamond (PCD) cylindrical tools which are used for machining non-ferrous metals (such as aluminum, copper, titanium, magnesium alloys, etc.) NS series of tools can ...

Diameter : 0.5 mm - 2 mm

... cutting tools. SNSTC not only provides helical edge diamond (PCD) cylindrical tools which are used for machining non-ferrous metals (such as aluminum, copper, titanium, magnesium alloys, etc.) NS series of tools can ...

Diameter : 0.2 mm - 3 mm

... cutting tools. SNSTC not only provides helical edge diamond (PCD) cylindrical tools which are used for machining non-ferrous metals (such as aluminum, copper, titanium, magnesium alloys, etc.) NS series of tools can ...

NACHI offers the most various types of end mills for a wide application range to machine numerous materials – from aluminium to titanium, through mild steels and carbon steels up to corrosion-proof chromium steel alloys. ...

Diameter : 3 mm - 20 mm
Length: 38 mm - 104 mm

Accelerated Aluminum Machining The ALUFLASH end mill urges machinists to increase cutting speeds to the machine capacity creating limitless performance in any aluminum application. This ...

Diameter : 4 mm - 20 mm
Length: 50 mm - 115 mm

Accelerated Aluminum Machining The ALUFLASH end mill urges machinists to increase cutting speeds to the machine capacity creating limitless performance in any aluminum application. This ...

Diameter : 12 mm
Length: 100 mm

Accelerated Aluminum Machining The ALUFLASH end mill urges machinists to increase cutting speeds to the machine capacity creating limitless performance in any aluminum application. This ...

Diameter : 1 mm - 12 mm
Length: 3 mm - 12 mm

Endmill Z1 SC E2 - 21026-8 Discover our range of mill bits for a variety of applications, but always meeting the quality criteria that we impose. Our roughing mill bits are designed to optimize the flow of chips ...

Diameter : 4 mm - 20 mm
Length: 57 mm - 104 mm

Endmill Z4 SC E2 + EZI-ALPHA - 21102A-7-8 Discover our range of mill bits for a variety of applications, but always meeting the quality criteria that we impose. Our roughing mill bits are designed to optimize the ...

Diameter : 3 mm - 16 mm
Length: 68 mm - 123 mm

Endmill Z4 SC E25UF + EZI-ALPHA - 21115A-3-6 Discover our range of mill bits for a variety of applications, but always meeting the quality criteria that we impose. Our roughing mill bits are designed to optimize ...

Diameter : 3.18 mm - 10 mm
Length: 12 mm - 42 mm
Rotational speed: 18,000 rpm

These single flute Upcut endmills have been specifically designed for cutting Aluminium, brass and aluminium composite panels. The large single flute design makes them very efficient at removing swarf and keeping the ...

Diameter : 1 mm - 8 mm
Length: 4 mm - 25 mm
Rotational speed: 18,000 rpm

These single flute Upcut endmills have been specifically designed for cutting Aluminium, brass and aluminium composite panels. The large single flute design makes them very efficient at removing swarf and keeping the ...

Diameter : 0.25 mm - 2 mm
Length: 15, 20.5, 30.5 mm

These tapered ballnose endmills are designed specifically for doing detailed 3D carvings in a variety of materials up to a hardness of HRC55. They perform extremely well with very complex designs and can leave an outstanding ...

Diameter : 3 mm - 20 mm
Length: 57 mm - 104 mm
Rotational speed: 187 rpm - 16,808 rpm

Series 33 end mills use the latest in engineering design and grinding capabilities. They are ideal for aggressive ramping, pocketing, and slotting in difficult to machine materials such as Stainless Steel, Titanium, and ...

Diameter : 2 mm - 28 mm
Length: 48 mm - 121 mm

Category Endmills Slotting end mills High performance 2 flutes Flatted shank

Diameter : 0.63 in - 1.5 in
Length: 0.72 in - 4.5 in

90° Backdraft & Hi-Feed End Mill Weldon Shank 6 mm Insert with 4 indexes Insert corners: .015" .031" .039" .047" .059" .062".079" R & Hi-Feed 32-63 Ra finish w/ integrated wiper (WEP) 63-125 Ra finish w/o wiper Backdraft ...

Diameter : 6, 12, 10, 8 mm
Length: 60, 80, 70 mm

Ceramic End Mill -Corner R Achieves high-efficiency machining for superalloy! Achieves cutting speed of Vc=800m/min.! •Achieves ultra-high-efficiency machining for superalloy. •The tools employ a spécial Silicon ...

Diameter : 6 mm - 25 mm
Length: 63 mm - 135 mm

Versatile solid carbide end mill for steels, cast iron, and titanium. HARVI™ II solid carbide end mills cover a variety of operations, including dynamic milling. HARVI™ II solid carbide end mills ...

Diameter : 1 mm - 12 mm
Length: 45 mm - 105 mm

END MILL, full radius, CVD-diamond-tipped – for milling aluminium alloys, graphite and plastics reinforced with abrasive fillers, such a CFRP and GFR.

Diameter : 0.3 mm - 5 mm
Length: 38 mm - 64 mm

High performance slot drills with reinforced shank. Tools developed for the machining of tough materials. The patented COOL+ coolant concept allows higher productivity. The extra smooth C-TOP coating improves tool life even at high temperatures ...

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

DescriptionGS 40 - roughing end mills with fine teethProduct3322 Number of teeth [z]3 cutting edge radiusedge Surface finishbright Tool materialHSS-E-PM TypeType NRf Cutting directionright hand StandardDIN 844K ...

Diameter : 0.13 in - 1 in
Length: 0.25 in - 2.63 in

The SS series 3 flute end mill remains the work horse when roughing in ferrous alloy applications. A standard corner radius protects the tool corner and enhances tool life in aggressive roughing applications. The SS series ...

Diameter : 2 mm - 16 mm

... and high rigidity, this series is suitable for low rigidity machine Also available as uncoated endmill for machining of aluminium alloys and non-ferrous metals

... surfacing or side-wall milling. End mills: used primarily for profiling operations with low-medium metal removal rates. Roughing end mills: designed for high metal removal rates, the object of roughing ...

Diameter : 4 mm - 12 mm
Length: 60, 75, 63, 83 mm

Taking off with Hufschmied Technology! Special machining tools from Hufschmied make the machining of CF/PEEK more efficient. This means that important structural components of drones can be manufactured without costly manual reworking. ...

... edged, wear and heat resistant milling programme which would cost effectively revolutionise metal removal rates. Now a standard feature of its WEM style endmills,shellmills, and facemills, the Wavemill ...

Diameter : 32 mm

... System A new member of the High-Performance family ensures an incomparably economic efficiency. Slotworx_HPA threaded shank end mill body, diam. 32 mm with 7 teeth completes from now on the milling system, well known ...

Diameter : 2 mm - 20 mm
Length: 58 mm - 105 mm

The HAIMER MILL Alu Series end mills have been developed for applications in aluminium. However, these cutting tools are also recommended for machining brass, copper and plastic. The micro-geometry of these milling ...