Pneumatic clamps

Clamping force: 0.4 kN - 0.7 kN

Standard compact pneumatic swing clamp. Pressure sensor detects the clamping/unclamping conditions by preparing air leakage checking hole. - Compact Design! For space-saving mounting. - ...

Clamping force: 4 kN - 6 kN

Pneumatic OD holding clamps. Machine the jaw to custom fit the workpiece. 4-jaw securely clamp a workpiece with the diaphragm clamping mechanism. Clamping Force: 4 kN, 6 kN Operating ...

Large Pneumatic Plane Grips from Mecmesin are pneumatically-operated grips. These devices use a parallel vice action to securely hold the flat samples in place. The grips are built with 50x30 mm cross-hatch knurl faces ...

The unit is manufactured by Mecmesin, and is a small pneumatic plane grip that is suitable for use in applications where there is a wide variety of specimens to test. The model is pneumatically-operated, and has a body ...

Clamping force: 140 N - 1,400 N

Pneumatic swing clamps Pneumatic swing clamps are used for applications which require only low clamping forces. The installed magnetic piston allows monitoring of ...

Clamping force: 0 kN - 1 kN

The 05610 is a pneumatic swing latch clamp. The device is made of a base body aluminum, red anodized, double acting piston rod in stainless steel materials and a polished finished. These clamps ...

... equipment surface occupying very less space. The clamp arm extends as it releases work piece from clamp loads. Then the arm rotates 90° to complete extend position. When retracting clamp ...

The FML series and FHL series are hydraulic swing clamp cylinders developed by Fabco-air. They come with 90° clam arm swings offering clearance and access for unloading or loading activity. With clamp ...

... Univer Group. It is a short-stroke cylinder guidance unit with a cylinder measurement of 40 to 50 to 63 to 80. It is a pneumatic unit with an integrated manual lever. The machine also has an angle opening that is adjustable ...

The Electronic Sensor is manufactured with M12 swivel connector. It is a self-holding device that is well suited for opening angle applications.

Fully- adjustable opening angle. Electronic sensor with M12 swivel connector.

The swing clamps with planar or helical rotation can be designed with different solutions of position detections. The system can detect the released position only or the 2 extreme positions of the cylinder. Different ...

Clamping force: 0.2 kN - 1.1 kN

... spring washer for simple setting of the clamp arm position. Mounting: - from above with cap screws through the flange - from below in a bore in the fixture using grooved nuts and clamping against ...

The CAS series, manufactured by Clamptek, is a pneumatic cylinder. Its body has been constructed out of aluminum alloy, the surface has been processed with hardening substances providing a long service life. The length ...

The NAU Upper Flange Swing Clamp Cylinder comes in four diameter sizes that range from Φ32 to Φ63. It is built with a double-acting type design and comes with a standard angle of 90°. The ...

Clamptek's NPSU Series of uppers flange swing clamp cylinders features bore measurements that approximate at Φ 25 - 63 mm, and total pressure rates that estimate at 0.7 Mpa. Models of the series sport ...

Clamping force: 850, 1,000 N

SDZ 40 F Used for clamping in component openings with expanding hooks and pulling mandrel. Very compact design, tensile force 1000 N, 10 mm clamping stroke.

Clamping force: 220, 170 N

SCBM 25-25 MINI SWIVEL CLAMP Mini swivel clamp in mono block design. Encapsulated model for welding applications. Sensing system optionally with weld field immune contactors.

Clamping force: 0.2 kN - 1.1 kN

SCT... PIVOTING CLAMP Screw-in design, 90° pivoting radius, Optional right or left pivoting movement, aluminum basic body with integrated pneumatic cylinder and pivoting mechanism, mounting by external ...

C(L)KQG*, Pin Clamp Cylinder, Built-in Standard Magnet SMC's pin clamp cylinder with a standard magnet, series C(L)KQ series was designed with 4 body types for a broad range of installation conditions. ...

Series GRM1 Miniature Pneumatic Workholding/Transfer Clamps are lightweight units with high clamp force and feature a cost competitive design. Series GRM1 Clamps provide ...

Clamping force: 450 N - 22,000 N

The air powered toggle clamps functions has a high holding capacity of 450N to 22000N. Once the air pressure fials, the toggle linkage assures of a positive mechanical locking. The ...

Applications: Assembly, checking fixtures, handling systems Lightweight, aluminum body Two mounting areas: front and side Toggle-action mechanism

The UNP Series power clamp is completely enclosed and designed to be used in harsh environments. This series conforms to NAAMS standards. The opening angle and open switch position can be adjusted without the use of any ...

1、The material of seals guarantees the reliable performance of the cylinder that is used under various conditions; 2、Three-slot guide structure leads to high guide precision. 3、There are single and double side clamping ...

Structure/Features Photograph ・Grips the workpiece hole and pulls on to seating surface Z-axis. ・Possible to process 5 faces except clamping face. ・Zero interference provides better machining process and simple tool ...

GN 875 Swing clamps in block version and GN 876 Swing clamps with screw-in thread are used when the clamping point for inserting and removing the workpiece must be freely accessible on top. During ...

... as for example slabs, side-angles, kerb stones. Pneumatic clamping and rotating around the longitudinal axis. Standard Specifications: Lifting eye for attaching to crane hook. Pneumatic ...