Steel endmills

Diameter : 0.2 mm - 1 mm

... high-performance micro-endmill, developed by Mikron Tool for roughing and finishing operations, especially for difficult and very difficult-to-machine materials. Two material-specific cutting-edge geometries are available: ...

Diameter : 0.3 mm - 6.35 mm

With CrazyMill Cool Z2, Mikron Tool has made a quantum leap in the milling of stainless steel, titanium, chromium-cobalt-alloys and superalloys. The newly designed roughing and finishing cutter improves ...

Diameter : 1 mm - 8 mm

... Mikron Tool developed specially for rough and finish milling of stainless steels, titanium, super alloys and CrCo alloys. It is also very well adapted for other materials such as steels ...

Diameter : 6 mm - 16 mm
Length: 65 mm - 115 mm

– Cost-effective finishing (up to 90% faster than with ball-nose end mills) – Higher productivity thanks to increased number of teeth – Tough and reliable (even with long overhangs) – High component precision

Diameter : 6 mm - 16 mm
Length: 65 mm - 115 mm

– Cost-effective finishing (up to 90% faster than with ball-nose end mills) – Higher productivity thanks to increased number of teeth – Tough and reliable (even with long overhangs) – High component precision

... finishing on end milling of cast iron,it can satisfy the demand for surface roughness and geometric toklerances. Hardened steel Cast irons （Recommend） Sintered irons Power Metallurgy

Diameter : 3 mm - 20 mm

Solid Carbide Torus End Mill Hard-Cut 1936A Hard-Cut carbide torus end mill for finishing applications in many materials, including hard materials. Product features and benefits: Very precise ...

Diameter : 2 mm - 20 mm

Solid Carbide End Mill 1824A Carbide end mill for roughing and finishing in all long-chipping materials. Product features and benefits: Special geometry enables best possible surface quality. TIALN ...

Diameter : 3 mm - 25 mm

Solid Carbide End Mill TOP-Cut “Enorm” 1999A TOP-Cut carbide end mill with lateral driving flat and long design for roughing and finishing in almost all materials. Product features and benefits: ENORM ...

Diameter : 1 mm - 20 mm
Length: 40 mm - 126 mm

... of the DHC Premium end mill (Different Helix Cutter) by LMT Fette consists in its multifunctionality: it allows the user to rough and finish with the same tool. It can also produce narrow projections and up to 2xd-deep ...

Diameter : 1 mm - 20 mm
Length: 40 mm - 126 mm

... FETTE DHC endmill (the name stands for “different helix cutter”) is its multifunctionality, which makes it possible to carry out roughing and finishing with the same tool. It can also produce narrow projections and up ...

Diameter : 0.3 mm - 2 mm

... are used for machining high hardened iron-based materials (such as super-hard steel, wear-resistant cast iron, die steel, etc.) and special materials (such as high speed steel, cemented ...

Diameter : 1 mm - 3 mm

... are used for machining high hardened iron-based materials (such as super-hard steel, wear-resistant cast iron, die steel, etc.) and special materials (such as high speed steel, cemented ...

Diameter : 0.2 mm - 3 mm

... are used for machining high hardened iron-based materials (such as super-hard steel, wear-resistant cast iron, die steel, etc.) and special materials (such as high speed steel, cemented ...

Diameter : 4 mm - 25 mm
Length: 55 mm - 121 mm

Unequal flute spacing. Center cutting. Single tool for both roughing and finishing operations requiring fewer setups. Standard items listed. Additional styles and coatings made to order. Uses and application Tool Dimensions: Flute ...

Diameter : 6.35 mm - 25.4 mm
Length: 101.6 mm - 152.4 mm

Unequal flute spacing. Center cutting. Single tool for both roughing and finishing operations requiring fewer setups. Standard items listed. Additional styles and coatings made to order. Uses and application Tool Dimensions: Flute ...

Diameter : 4 mm - 20 mm
Length: 50 mm - 104 mm

Center cutting. Chamfered and sharp corners. Standard items listed. Additional styles and coatings made-to-order. Uses and application Tool Dimensions: Flute Configuration: 4 Helix Angle: 30° Corner Style: Corner Chamfer 38552 Slotting: ...

Diameter : 12 mm - 40 mm
Length: 130 mm - 350 mm

TRS INDEXABLE END MILL Recommended insert: HITACHI INSERTS RDMT08，RDMT10，RDMT12 Multi-function of cutting,roughing、surfacing、grooving

Diameter : 2 mm - 12 mm
Length: 74 mm - 120 mm

4 Flutes corner radius end mill unequal flute spacing Steel < 1300 n/mm² Hardened and Tempered Steel 35 ÷ 45 HRC Hardened and Tempered Steel 45 ÷ 55 HRC Hardened ...

Diameter : 6 mm - 20 mm
Length: 57 mm - 108 mm

Multi-flute end mill for super-finishing Machined Materials Steel < 1300 n/mm² Hardened and Tempered Steel 35 ÷ 45 HRC

Diameter : 1 mm - 20 mm
Length: 57 mm - 104 mm

2 flute ball nose end mill for finishing hardened steels up to 64HRC Machined Materials Hardened and Tempered Steel 45 ÷ 55 HRC Hardened and Tempered Steel 55 ÷ 65 HRC Stellite

These 2 flute chamfering endmills have been specifically designed for adding clean chamfers on sharp machined edge. The 2 flute design allows for excellent chip ejection and reduces chip welding. These endmills ...

Diameter : 2, 3, 4, 6 mm
Length: 6, 8, 11, 15 mm

These 2 flute spiral endmills have been specifically designed for profile cutting and machining harder materials such as mild steel. The 2 flute design allows for excellent chip ejection and reduces chip ...

Diameter : 4 mm - 12 mm
Length: 11 mm - 30 mm

... ferrous metals up to 55HRC. This mill is primarily used for edge or peripheral milling. Recommended for •Mild Steel •Stainless steel (304 & 316 grade)

Diameter : 0.3 mm - 3 mm
Length: 38 mm

... complemented by a range of engravers, micro-drills, micro-reamers and whirlers. Micro Endmill Z3 SC E25UF + EZI-ALPHA + Bevel - 21046A-0.3 MICRO ENDMILL FOR OIFFICULT MATERIALS Tool / Material ...

Diameter : 0.3 mm - 3 mm
Length: 38 mm

... application. These micro-mill bits are complemented by a range of engravers, micro-drills, micro-reamers and whirlers. Micro Endmill Z3 SC E25UF + EZI-ALPHA + Bevel - 21046A-0.4

Diameter : 0.3 mm - 3 mm
Length: 38 mm

... application. These micro-mill bits are complemented by a range of engravers, micro-drills, micro-reamers and whirlers. Micro Endmill Z3 SC E25UF + EZI-ALPHA + Bevel - 21046A-1.5

Diameter : 16 mm - 50 mm
Length: 25 mm - 220 mm

Wall surface accuracy during shoulder milling has been improved.　Exceptionally tough High-Feed Ultra End Mill. Cutter bodies are added 23 items Insert join the ranks of tools for difficult-to-cut materials. Newly appear two kind of breakers.

Diameter : 6 mm - 20 mm
Length: 50 mm - 150 mm

V-Carb end mills set the standard for peak finish quality. These five-flute, unequal helix tools feature unequal indexing and an ideal rake and relief combination for unmatched finishing capability. Available with a full ...

Diameter : 0.25 in - 0.75 in
Length: 2.5 in - 4 in

Innovative high-performance solid carbide end mills Features and Benefits Combo high-feed variable pitch chipsplitter 4- and 5-flutes with 38° and large corner radii An end mill that provides the ...

Diameter : 1 mm - 12 mm
Length: 45 mm - 105 mm

END MILL, full radius, CVD-diamond-tipped – for milling aluminium alloys, graphite and plastics reinforced with abrasive fillers, such a CFRP and GFR.

Diameter : 2 mm - 28 mm
Length: 48 mm - 121 mm

Category Endmills Slotting end mills High performance 2 flutes Flatted shank

... super alloys and low carbon steels, geometry M for steels and stainless steels, while geometry R is for cast iron and hardened materials. To support this addition, ...

Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm

DescriptionGS 40 - roughing end mills with fine teethProduct3322 Number of teeth [z]3 cutting edge radiusedge Surface finishbright Tool materialHSS-E-PM TypeType NRf Cutting directionright hand StandardDIN 844K ...

Diameter : 0.13 in - 1 in
Length: 0.25 in - 2.63 in

The SS series 3 flute end mill remains the work horse when roughing in ferrous alloy applications. A standard corner radius protects the tool corner and enhances tool life in aggressive roughing applications. ...

High Efficiency Endmill for Steel Machining The optimised flute geometry ensures reliable chip removal. Anti-vibration design - the irregular pitch and irregular lead of the mill prevent vibrations. Stable ...

Diameter : 0.3 mm - 5 mm
Length: 38 mm - 64 mm

End mills, reinforced shank, high performance, developed for the machining of tough materials. The patented COOL+ coolant concept allows higher productivity. The extra smooth C-TOP coating improves tool life even at high temperatures ...

High speed machining of medium to high hardness steels with maximum stiffness for rapid metal removal and excellent chip evacuation now available from our new range of GS Hard endmills. ...

Diameter : 16 mm - 52 mm
Length: 38 mm - 53 mm

... square shoulder face milling- and slotting end mills for universal applications: roughing and finishing of steel, cast iron, aluminium, graphite, plastics as well as hardened materials and for machining ...

Diameter : 10 mm - 20 mm

Solid carbide milling head with Duo- Lock™ interface for maximum stability, load capacity and runout accuracy. Particularly suitable for long overhang and labile clamping Best results with DL-HM Extension Neck for higher ...

Diameter : 0.4 mm - 2 mm
Rotational speed: 12,000 rpm - 50,000 rpm

CBN end mill series, the ultimate choice for finish machining moulds. Expansion of the long neck ball nose series The realisatin of excellent performance when milling hardened steel over 65HRC. High ...