- Electricity - Electronics >
- Power Supply >
- Step-down DC/DC converter
Step-down DC/DC converters
Input voltage: 0 V - 900 V
Output voltage: 300 V - 1,000 V
Power: 50,000 W
EPCS series energy storage bidirectional DC/DC converters, based on a three-level topology, can realize bidirectional conversion from DC to DC. It has the advantages of bidirectional wide voltage range, bidirectional voltage and current ...
Input voltage: 48 V
Output voltage: 600 V
Power: 3,500 W
EPC systems have shaped the new generation of bidirectional DC/DC Converters. EPCs (Epic Power Converters) are suitable for a large number of applications ranging from industrial ones to those in the field of renewable energies. Bidirectional ...
Epic Power Converters S.L.
Output voltage: 220 V - 450 V
Power: 5,000, 10,000 W
The DC/DC converter supplies the power to operate electrical heated catalyst systems, like Vitesco Technologies‘ EMICAT®. The system can be used in passenger cars as well as in commercial vehicles and off-highway applications. FACTS ...
Input voltage: 230 V - 800 V
Output voltage: 24, 48 V
Power: 4,000 W
RECOM and its subsidiary Power Control Systems as specialist for customised solutions, has an ideal solution for any application requiring high-power plug & play. DC input or 1AC or 3AC, RECOM Power Solutions ensure high power density ...
Input voltage: 4.75 V - 34 V
Output voltage: 1.5 V - 15 V
Power: 0.75 W - 7.5 W
The SR series switching regulators are pin compatible, efficient, replacement for the 78XX positive linear regulators. With efficiency up to 95%, very little energy is wasted as heat so there is no requirement for a heatsink, giving significant ...
XP Power
Input voltage: 8 V - 48 V
Output voltage: 5 V
PC/104 DC to DC + 24-bit digital I/O card Input : +8V to +48 VDC Output : 5V @ 2A Overload/Overheat Protection 24-bit ditital I/O lines , emulate 8255 PPI mode 0 Transfer rate :300 KB/s (typical)
Input voltage: 36 V - 60 V
Output voltage: 9.6 V - 48 V
Power: 300 W - 850 W
The Intermediate Bus Converter (IBC) Modules are a very efficient, low profile, isolated, fixed ratio converters for power system applications in enterprise and optical access networks. Rated at up to 500 W from 36 Vin and up to 850 ...
VICOR
Input voltage: 24, 110 V
Output voltage: 24, -24 V
Power: 200 W
The ENR200 family is a well proven design that has been in use for more than 10 years in rail vehicles in Europe, Asia, USA, Africa, South America and Australia. With more than 40.000 units in operation worldwide it has a proven reliability ...
Powerbox
Input voltage: 9.2 V - 18 V
Output voltage: 12.5 V
Power: 200 W
The Samlex IDC-200 series is a complete line of high efficiency 200 Watt isolated DC-DC converters which are suitable for applications requiring galvanic isolation between the input and output. This unit provides a highly regulated output ...
Samlex America
Input voltage: 24 V - 220 V
Output voltage: 24 V - 220 V
Power: 500 W - 1,800 W
The GWL series is a DC/DC converter system that has a power rate of 500 to 1800 W and up to 1 outputs. It also has an input voltage of 24 to 220 VDC and an output voltage of 24 - 220 VDC. It is a single unit that is capable of providing ...
Zentro-Elektrik
Output voltage: 24 V - 110 V
Power: 3,000 W
Features: Programmable DC/DC Converters to provide voltage or current output Maximum Power Point Tracking algorithm available Optimized for high current Liquid cooling CAN 2.0 bus Parallelisation of several converters available ...
TAME-POWER
Input voltage: 40 V - 60 V
Output voltage: 12 V - 48 V
Power: 650 W - 1,000 W
Features and Options Isolated 5V, ¼A Standby Output Hot-Swap Operation 12, 24 or 48VDC Output Remote Output Adjustment Up to 3000 Watts System Output Wide Range 40 to 60VDC Input Integral LED Status Indicators -20ºC to +70ºC Operating I²C ...
Unipower
Input voltage: 24 V
Output voltage: 12 V
High frequency voltage reducers in order to convert 24VDC direct current, into12VDC. Isolated from earth. A large selection of voltages: 17.0 to 32.0 VDC. Exit voltages: 13.6 VDC +/- 15%. Wide range: between 3 & 24 amps. ...
TECSUP
Output voltage: 24 V - 220 V
Power: 500 W
The PWD 506 has a continuous rated power of 500 W and is available for input voltages and output voltages of 24 - 220 V.
Kaco
Input voltage: 2.3 V - 34 V
Output voltage: 0.7 V - 31.6 V
34V Input Synchronous Step-down DC/DC Controller for Automotive Applications The R1272S is a step-down DC/DC controller which can generate an output voltage of 0.7V to 5.3V by driving external high- / low-side NMOSs. By the adoption ...
Input voltage: 5.5 V - 60 V
Output voltage: 3, 2, 4 V
The MYCxx series of Ultra-Thin, Fully Integrated Charge pump, Capacitor divider module is based on Murata's proprietary adiabatic or lossless charge pump technology. The module integrates all passive components including inductor in ...
Input voltage: 8 V - 54 V
Output voltage: 4.9 V - 24.1 V
Power: 120 W - 200 W
DC/DC Converters for 48V 120 W or 200 W continuous H20: 8 – 54 VDC, H21: 15 – 54 VDC, H22: 27 – 54 VDC H20: 5 ± 0.1 V , H21: 12 ± 0.1 V , H22: 24 ± 0.1 V High efficiency non isolated solution 275 kHz (typ.) 300 mV (avg.) %70 ...
Eilersen presents Type 4051A ATEX certified power supply. This has been ATEX certified for hazardous zones 1, 2, 21, and 22. It has been designed for providing supply to Eilersen digital weighing modules 4XXXA interface modules when employed ...
Input voltage: 7 V - 36 V
Output voltage: 1 V - 25.2 V
This product guarantees long life cycle in Industrial market. BD9E300UEFJ-LB(E2) is a synchronous buck switching regulator with built-in power MOSFETs. It is capable of an output current of up to 2.5A. It has a high oscillation frequency ...
ROHM Semiconductor
Input voltage: 0 V - 1,200 V
Output voltage: 600, 1,000 V
Power: 30,000, 250,000, 120,000 W
In industry, the focus is on maximum productivity, energy efficiency, and component reliability. Power grids are becoming increasingly volatile. DC-DC Converters make it possible to integrate storage systems into the drive line-up. Regenerative ...
Input voltage: 48 V
Output voltage: 12, 4 V
Power: 72 W
MYC0409 is 48 Volt divide-by-4 Charge pump Capacitor divider fully-integrated module. Capable of delivering up to 72 watts of power with peak efficiency of 97%. MYC0409 devices can be connected in parallel to provide high power, high ...
Input voltage: 24 V
Output voltage: 12 V - 28.5 V
Power: 580, 500 W
Product Introduction: MPD series DC-DC Converter is a device uses to convert and isolate DC current and voltage. The converter is capable of converting 12V, 24V and 48V DC power sources into isolated and regulated 12V, 24V or 48V DC power ...
Input voltage: 2.5 V - 42 V
Output voltage: 0.8 V - 41 V
Power: 0.4, 0.2, 140, 4.1, 143 W
provides high efficiency step-down DC/DC converter modules which is capable of supplying up to 5A of load current. With 2.7V to 42V wide operating range, users can set output voltage up to 41V by pin selection. DD Series also incorporates ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining