Step-down DC/DC converters

Input voltage: 2.7 V - 5.5 V

ROHM has recently announced the availability of the BD9S series (BD9S400MUF-C, BD9S300MUF-C, BD9S200MUF-C, BD9S100NUX-C, BD9S000NUX-C). This series of automotive synchronous secondary buck DC/DC converters have a high reliability and ...

Input voltage: 2.3 V - 76 V
Output voltage: 0.6 V - 76 V

2.7V to 5.5V Input, Integrated MOSFET Single Synchronous Buck DC/DC Converter ·Synchronous 1 ch DC/DC converter ·SLLMTM (Simple Light Load Mode) control ·Over Current Protection ·Short Circuit Protection ·Thermal Shutdown protection ·Under ...

Input voltage: 16 V - 60 V
Output voltage: 3.3 V

ROHM has recently announced the availability of a DC/DC converter with built-in MOSFET that achieves the highest step-down ratio in the industry (at 2MHz) required for 48V automotive systems such as mild hybrid vehicles. The BD9V100MUF-C ...

Power: 30 W
Input voltage: 24, 110 V
Output voltage: 5.1 V - 48 V

Innovating power supplies, the MTM POWER® DC / DC converter for PCB and chassis mounting has a wide variety of spacial features such as: an ultra wide input range, a galvanically seperated, a transient protected and a short circuit protected.

Power: 600 W - 608 W
Input voltage: 48, 24 V
Output voltage: 28, 12, 32 V

The PMD600WFB series, which is manufactured by Mtm Power, is a DC/DC converter in a brick housing. The unit has a rated power that varies from 75 W - 600 W with an efficiency of ≥92 %. The input of the unit varies from 9...18 VDC, 9/10...36 ...

Power: 240 W - 264 W
Input voltage: 24 V - 110 V
Output voltage: 12 V - 55 V

The primary switched DC/DC-converters are designed automotive applications and operate according to the push-pull principle, wherein input dc-voltage is chopped by two push-pull working transistors with a frequency of approximately 60 ...

Input voltage: 4.8 V - 32 V
Output voltage: 1.5 V - 12 V

TSR-0.5SM is a series of step-down nonisolated switching regulators in compact SIP package. These converters are an ideal alternative to LM78 linear regulators when energy efficiency is a parameter of the design. The high efficiency up ...

Input voltage: 7 V - 32 V
Output voltage: -15 V - -5 V

The new TSN-1 series step-down switching regulators are drop-in replacement for inefficient LM79xx linear regulators. A high efficiency up to 96 % allows full load operation up to +70°C (+85°C with derating) ambient temperature without ...

Input voltage: 3 V - 36 V
Output voltage: 1.2 V - 15 V

The TSR-1SM series models of step-down switching regulators have a high efficiency up to 96 % which allows full load operation up to +65°C ambient temperature without the need of any heat transmission layer. Excellent output voltage accuracy ...

Power: 20, 30 W
Input voltage: 18, 24, 36, 48 V
Output voltage: 3.3, 5, 12, 15, 24 V

Product Typical Features ◆ Wide input voltage range（4:1）Output Power 30W ◆ Ultrathin Package ：9.5mm ◆ Transfer Efficiency up to 90% ◆ Stand-by Power Consumption as low as 0.2W ◆ Output super-fast start up as low as 20mS ◆ Continuous ...

Power: 12 W
Input voltage: 18, 24, 36, 48 V
Output voltage: 3.3, 5, 9, 12, 15 V

Product Typical Features： ◆Wide input voltage range ( 4:1)，Output Power 12W ◆ Transfer Efficiency up to 89% ◆ Stand-by Power Consumption as low as 0.020W ◆ Output super-fast start up ◆ Continuous Short Circuit protection, Self-recovery ◆ ...

Power: 1 W
Input voltage: 5, 12, 24, 48 V
Output voltage: 5, 12, 15, 24 V

Typical Features: ◆Wide Input Voltage Range ( 2:1), Output Power 1W ◆Conversion Efficiency up to 82% ◆With remote control Switch-off function ◆Continuous Short Circuit protection, Self-recovery ◆No Overshooting when turn-on or ...

Power: 250 W
Input voltage: 24 V - 110 V
Output voltage: 5 V - 110 V

This fully encapsulated, dual output, railway quality DC/DC converter uses a field-proven high efficiency power conversion topology to generate 250W output power. The unit has two fully independent, regulated isolated output stages, V1 ...

Power: 25 W
Input voltage: 12 V - 110 V
Output voltage: 3.3 V - 250 V

ABSOPULSE designs and manufactures an extensive range of railway power supply solutions. Our railway converters power on-board and track-side electronic systems in railway projects around the world. They are installed in mass transit ...

Power: 30,000 W
Input voltage: 12 V - 110 V
Output voltage: 3.3 V - 250 V

Power: 100 W - 200,000 W
Input voltage: 12 V - 800 V
Output voltage: 12 V - 800 V

We can supply upon request: - DC/DC Regulated Converters of any voltage and power with or without galvanic insulation - Cathodic Protection Power Supplies, supplied in monophase, threephase or by a PV module up to 500 A - Manual ...

Power: 200,000 W
Input voltage: 10 V - 1,150 V
Output voltage: 60 V - 1,200 V

The DC-DC power converter is a bidirectional cabinet mountable unit with many different applications. Moreover, the converter can be stacked for achieving higher power with no communication between them. Having numerous communication ...

Power: 200,000 W
Input voltage: 10 V - 700 V
Output voltage: 60 V - 750 V

The DC-DC power converter is a bidirectional cabinet mountable unit with many different applications. Moreover, the converter can be stacked for achieving higher power with no communication between them. Having numerous communication ...

Power: 40,000 W
Input voltage: 10 V - 410 V
Output voltage: 60 V - 450 V

The DC/DC power converter is a bidirectional cabinet mountable unit with many different applications. Moreover, the converter can be stacked for achieving higher power with no communication between them. Having numerous communication ...

Power: 7.5, 6, 2.5, 1.65 W
Input voltage: 24, 12 V
Output voltage: 15, 12, 5, 3.3 V

K78Lxx-500R3 series are high efficiency switching regulators and ideal substitutes of LM78xx series three-terminal linear regulators. Theproduct is featured with high efficiency, low loss, short circuit protection, support the negative ...

Power: 7.5, 6, 4.5, 2.5, 1.65 W
Input voltage: 24, 12 V
Output voltage: 3.3, 12, 15, 5, 9 V

K78xx-500R3 series are high efficiency switching regulators and ideal substitutes of LM78xx series three-terminal linear regulators. The product is featured with high efficiency, low loss, short circuit protection , support the negative ...

Power: 40, 15, 10 W
Input voltage: 200 V - 1,000 V
Output voltage: 24, 15, 12, 5 V

PVxx-29Bxx series -----is 200-1500VDC ultra wide input voltage regulated DC-DC converter. which has advantages such as high efficiency, high reliability and high safety isolation. The series products are widely used in industries such ...

Power: 3,000 W
Output voltage: 24 V - 110 V

Features: Programmable DC/DC Converters to provide voltage or current output Maximum Power Point Tracking algorithm available Optimized for high current Liquid cooling CAN 2.0 bus Parallelisation of several converters available ...

Power: 3,500 W
Output voltage: 40 V - 110 V

Features: Programmable DC/DC Converters to provide voltage or current output Maximum Power Point Tracking algorithm available Optimized for high current Liquid cooling CAN 2.0 bus Parallelisation of several converters available ...

Power: 5,500 W
Output voltage: 35 V - 450 V

Features: Programmable DC/DC Converters to provide voltage or current output Maximum Power Point Tracking algorithm available Optimized for high current Liquid cooling CAN 2.0 bus Parallelisation of several converters available ...

Input voltage: 9 V - 36 V
Output voltage: 12, 15 V

Possibilities of use: As Interface between SPS- control unit and torque transducers. for voltage stabilization for torque transdu- cer on floating power supply (9-36V e.g. in automobile industry). for galvanic isolation between supply ...

Power: 27 W - 40 W
Input voltage: 20 V - 32 V
Output voltage: 13.5 V

Protected against reversed polarity (input) Protected against overvoltage (output) 6,3 mm push-on terminals (input and output) Common negative connection for input and output E-marked vehicle directive ref. (95/54/EC)

Power: 80 W - 100 W
Input voltage: 20 V - 32 V
Output voltage: 13.5 V

Protected against reversed polarity 6,3 A fuse (input) Protected against overvoltage at approx. 16 V (output) Backup: Protected against overvoltage at output and short circuit proof 6,3 mm push-on terminals (input and output) Common ...

Power: 80 W - 100 W
Input voltage: 20 V - 32 V
Output voltage: 13.5 V

Protected against reversed polarity 8 A fuse (input) Protected against overvoltage at approx. 16 V (output) 6,3 mm push-on terminals (input and output) Common negative connection for input and output Specially designed for car stereo ...

Input voltage: 15 V

The AP-1294 incorporates two isolated DC-DC converters which supply power to the IPM module. High speed optocouplers provide the proper interface between the module and the customers control electronics. The assembly provides direct ...

Input voltage: 2.8 V - 6 V
Output voltage: 0.6 V - 5.5 V

The TPS6281x-Q1 is family of pin-to-pin 1-A, 2-A, 3-A and 4-A synchronous step-down DC/DC converters. All devices offer high efficiency and ease of use. The TPS6281x-Q1 family is based on a peak current mode control topology. TPS6281x-Q1 ...

Input voltage: 4.5 V - 76 V
Output voltage: 0.8 V - 68.4 V

The MAX17761, high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4.5V to 76V input. The converter can deliver up to 1A current. Output voltage is programmable from 0.8V up to 90% ...

Power: 13.13 W
Input voltage: 12 V
Output voltage: 1 V - 5.3 V

MYLSM00502EPRL is Surface Mount type of DC-DC power converter for embedded applications. The tiny form factor measures only 7.9 x 7.9 x 2.3 mm. The wide input range is 4.5 to 17Vdc. The maximum output current of 2.5A. Based on Hi-frequency ...

Input voltage: 24 V
Output voltage: 12 V

Stable power supply despite fluctuating DC voltage Plants and systems with safety-related applications are equipped with a battery backup. These include, for example, applications in industry, power plants, water treatment plants, and ...

Power: 250 W
Input voltage: 36 V - 75 V
Output voltage: 5 V

This Maxpower Pro uses four output voltages and an input voltage at 48 VDC (range from 36-75 VDC) with a 250 W current supply. It uses a P47 connector and redundant outputs on the CSB or current share bus. It supports hot-swap technology ...

Power: 400 W
Input voltage: 77 V - 154 V
Output voltage: 24.5 V

The CPS20.241-60 DC/DC converter is designed specifically for railway & transportation applications. It is approved according to the EN 50155 standard, which is an international standard covering electronic equipment used on rolling stock ...

Power: 30 W
Input voltage: 20 V - 70 V
Output voltage: 5 V - 48 V

When AC power is not available, these converters give the power for industrial equipment and instrumental devices. The SCD Series accepts a wide range of voltages and is capable of stabilizing output voltage to protect sensitive equipment ...

Power: 600 W
Input voltage: 330 V - 365 V
Output voltage: 11 V

The BQ35211EEC60 bus converter is a next-generation, board-mountable, isolated, fixed switching frequency DC-DC converter that uses synchronous rectification to achieve extremely high conversion efficiency. The Bus Qor series provides ...

Input voltage: 24 V
Output voltage: 0 V - 10 V

In the field of power supply,> Murrelektronik offers complete system solutions from a single source. Our product portfolio includes a complete range of products, from simple transformers through to battery-backed, redundant, intelligent ...

Power: 1,920 W - 3,840 W
Input voltage: 34 V - 104 V
Output voltage: 24 V

Due to the fact that planar devices are used, it is possible to achieve a high power density combined with a very flat design. The converters are designed in a completely dry construction (no electrolyte). The different types of the ...

Input voltage: 24 V
Output voltage: 24 V

General Data Input rated voltage 24 Vdc Output rated voltage 24 Vdc Capacity 3.2 ‑ 12 Ah Ambient temperature ‑10° C to +40° C Advantages Automatic detection of connected battery module Reliable early warning signal when battery life ...

Power: 30 W - 200 W
Input voltage: 14.4 V - 160 V
Output voltage: 5 V - 24 V

30-200W, 5-24V Output, 60-160VDC Input, DC-DC 60 - 160VDC Input IEC 61373 Shock and Vibration Base plate Cooled Full Power at 100°C base plate Five Year Warranty

Power: 0 W - 10 W
Input voltage: 5 V - 75 V
Output voltage: 3.3 V - 24 V

This group includes 0~10W DC/DC power modules which have single or dual outputs and encapsulated package with as DIP, SIP and SMD pins. These modules housed in industry standard footprint and pinout are easy to use and available in a ...