- Hydraulics - Pneumatics >
- Pump >
- Suction pump
Suction pumps
Flow: 120,000 m³/h
Head: 180 m
Power: 7,350 kW
... Models WMCC and WMCE PROVEN PERFORMANCE WITH OVER 130 YEARS OF EXPERIENCE: EACH PUMP IS CUSTOM DESIGNED FOR HIGHEST EFFICIENCY AND MAXIMUM RELIABILITY Custom designing pumps for each application enables ...
FLYGT
Flow: 11.4 l/min
Pressure: 75 bar
The Unitor 10:1 Hydra-Clean chemical pump is ideal for a majority of fluid handling tasks onboard. Delivered ready to use and includes strainer, hoses, spray gun and nozzle. Pumps are designed to be mounted ...
Pressure: 16 bar
Fluid temperature: -10 °C - 60 °C
Length: 560 mm
The pump is designed to fill tanks of PR 14 type central lubrication pumps and other pumps with plastic grease. It may be used to fill other containers with plastic grease as well. Capacity ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... stage, single suction radial impeller, radially split volute. Axial suction, axial discharge, the center of suction and discharge ports are located on the same horizontal line, vertical ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Flow: 11 l/min
Pressure: 110 bar
Power: 2.2 kW
Triplex pump with connecting rod system. Pistons in ceramic-coated steel. Double gasket sealing system. Pump head in pressed brass. Automatic safety valve with pressure shut-off at pump ...
Flow: 9 m³/h - 87 m³/h
Pressure: 20, 18, 16 bar
Fluid temperature: -20 °C - 140 °C
... is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, ...
INOXPA
Flow: 11.5 m³/h - 110 m³/h
Pressure: 10, 12, 8, 6 bar
Fluid temperature: -20 °C - 140 °C
... screw pump, with sanitary design, suitable for use in the dairy, food and beverage, cosmetics, etc. The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. ...
INOXPA
Flow: 1.4, 4, 9, 20, 28 m³/h
Pressure: 2 bar - 4 bar
Power: 0.75, 1.5, 3 kW
The RF pump is a flexible impeller pump. Due to the design, these pumps are reversible, self-priming and can suck from a maximum height of 5 meters. This type of pump ...
INOXPA
Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W
... media such as the urea solution AdBlue®*. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin fluid and ...
Dr. Jessberger GmbH
Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W
... robust and powerful engine can be used as a 24 Volt engine for the suction tubes of drum pumps and is in this combination suitable for many thin fluid and slightly viscous, neutral, aggressive and non-flammable ...
Dr. Jessberger GmbH
Flow: 93, 74 l/min
Head: 11, 26 m
Power: 640 W
... and the galvanic industry beside JP-280. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin liquid and ...
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle ...
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction ...
Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...
WANGEN Pumpen
Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar
The WANGEN progressing cavity pump type KB-SL Hygienic is a further development of the pump construction series for the food industry. In this area, where there is contact with the product, the stainless ...
WANGEN Pumpen
Flow: 0 m³/h - 150 m³/h
Pressure: 0 bar - 48 bar
... maintenance and repairs compact construction based on modular principle for high flexibility compact design avoids dead space and stagnantion zones consistant diameters at joint connections for constant ...
WANGEN Pumpen
Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"
Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...
Cornell Pump
Flow: 0 us gal/min - 7,000 us gal/min
Fluid temperature: 550 °F
... phase at 392°F (200°C), until it reaches the pump suction where the action of the impeller breaks up the water into smaller droplets that flash into steam. Ordinarily, entrained steam would impair the ...
Cornell Pump
Flow: 0 us gal/min - 8,000 us gal/min
Head: 0 m - 256 m
Hybrid Pumps Cornell Pump hybrid pumps are able to handle dirty water and viscous slurries. They can handle small solids and high operating pressures for up to 800′ ...
Cornell Pump
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing cavity pump ...
PCM
Flow: 0 m³/h - 108 m³/h
Pressure: 0 bar - 24 bar
... progressing cavity pump is the ideal solution for upstream and downstream oil & gas applications within onshore and offshore facilities. It combines API standards with our unrivalled industry expertise. PCM Moineau™ ...
PCM
Flow: 0 m³/h - 6 m³/h
Pressure: 4 bar
As one of most compact progressing cavity pumps available today, the PCM EcoMoineau™C floating stator pump can handle a wide range of fluids with varying viscosities and solids. It provides ...
PCM
Flow: 0.15, 0.18 l/min
Power: 2.4, 1.6, 2.3, 1.5 W
Max. pressure height up to 10 m H2O Suction height up to 6 m H2O Suction of mixed gas / liquid media Linear flow control via voltage High efficiency Self priming ...
Gardner Denver Thomas
Flow: 33.5, 25.4 l/min
Pressure: 75 psi
Head: 32'00" ft - 45'00"
... Integrity Series Pumps offer a flexible and robust solution to OEM applications. Constructed with a proprietary blend of PPS, the INTG3 is compatible with a wide variety of fluids. By manufacturing the motors and ...
Gorman-Rupp Industries
Head: 20 m - 500 m
... conditions demand a robust and reliable solution. That’s where GE's condensate extraction pumps come in. Extraction pump expertise Various tested configurations Our ...
Flow: 400, 650, 285, 2,000 l/h
Power: 3 W - 36 W
Length: 55 mm - 150 mm
The low power HX88 mini series is ideal for water feature, rock pools and water falls. Its rotor assembelly is easy to remove and maintain whilst having the ability to be mounted in any orientation. The HX88 mini ...
Flow: 0 l/min - 0.7 l/min
Pressure: 30 psi
Fluid temperature: 5 °C - 50 °C
Parker’s LTC Miniature Diaphragm pump is a compact versatile pump with the option of a brush or brushless DC motor drives that can be configured for specific requirements ...
Flow: 0.1 m³/h - 1,278 m³/h
Pressure: 0 bar - 400 bar
Head: 0.1 m - 4,000 m
... Service-friendly: pump cartridge can be replaced without dismantling the pump, and wear parts can be serviced without opening the pump. Reduced operating costs by high efficiency (cellular ...
KSB
Flow: 11,355 m³/h
Pressure: 21 bar
Head: 215 m
... temperature and pressure process pump that meets or exceeds the latest editions of API-610 and ISO 13709. Safety, reliability, and versatility are the key words for our double suction API 610 between-bearing ...
Goulds Pumps
Flow: 9,000 m³/h
Pressure: 40 bar
Head: 190 m
For over 100 years, ANDRITZ has been a byword for competence and innovation in designing centrifugal pumps. Our end-suction centrifugal pumps are operating in various industrial applications ...
ANDRITZ
Flow: 26.4 l/min
Pressure: 6, 120 bar
Fluid temperature: 50 °C
The Flowmax® pump ensures total leak free sealing, performance, an extended lifetime and reliability. LEAK FREE PUMP FOR INTENSIVE USE Zero maintenance: FLOWMAX® technology Designed for moisture-sensitive ...
Double volute – Single and Double Suction DVSHF/THF are BB2 pumps, in accordance with the API610 standard, and are centerline mounted, horizontal, respectively one and two-stage, staggered single ...
GE Compressors
Flow: 33 l/s
Head: 313 m
Power: 45 kW
CVX VERTICAL MULTISTAGE ELECTRIC PUMPS The new range of vertical multistage pumps CVX series in stainless steel features suction and delivery in line and high energy efficiency motors. The ...
Caprari
Flow: 1 l/h - 30 l/h
Pressure: 5 bar - 20 bar
Power: 5 W - 35 W
... 100…250Vac (50/60Hz) • UNDERLOAD function – suction alarm, for low (end) chemical level, blocking suction valve or damaged suction tube • OVERLOAD function – dosing alarm, for overpressure ...
Etatron D.S.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining