Programmable IC ADAR2004 series

programmable IC
programmable IC
programmable IC
programmable IC
Add to favorites
Compare this product


power, programmable


Quad LNA, mixer, IF VGA 4× LO multiplier with programmable harmonic filter RF input frequency range: 10 GHz to 40 GHz IF output frequency range: 0 MHz to 800 MHz LO input frequency range: 2.4 GHz to 10.1 GHz Gain range: 21 dB to 41 dB Input P1dB: −20 dBm typical (at minimum gain) Noise figure: 9 dB typical (at maximum gain) 3-Wire or 4-Wire SPI Control On-Chip Programmable State Machines for fast multiplier/filter and receiver switching and control On-Chip Temperature Sensor and ADC DC power: 910 mW (2.5 V supply) 7 mm × 7 mm, 48-terminal LGA package The ADAR2004 is a 4-channel receiver IC that is optimized for millimeter wave body scanning applications. Accepting differential input signals from 10 GHz to 40 GHz, the ADAR2004 provides a low intermediate frequency (IF) output up to 800 MHz. Each receive channel also has independent gain control. The mixer local oscillator (LO) path includes a 4× multiplier requiring an applied LO frequency between 2.4 GHz and 10.1 GHz. The 4× multiplier block includes a programmable filter that helps keep harmonics down before reaching the mixer. Two programmable state machines are included to facilitate simple configuration, control, and fast switching of the frequency multiplier, filter, and receiver sections. These sequencers are programmed through the serial peripheral interface (SPI) and are then operated by pulsed inputs (reset and advance). The ADAR2004 requires only a single 2.5 V supply with power consumption of 910 mW with all channels turned on. The ADAR2004 is available in a 7 × 7 mm, 48-terminal LGA package and is specified from −40°C to +85°C. Millimeter wave imaging Security Medical Industrial Multichannel receivers


No catalogs are available for this product.

See all of ADI‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.