video corpo

suction filter / hydraulic / oil / with cartridge

Add to MyDirectIndustry favorites
Compare this product
suction filter / hydraulic / oil / with cartridge suction filter / hydraulic / oil / with cartridge


  • Designed for:

    hydraulic, oil

  • Filtration element:

    with cartridge

  • Other characteristics:

    suction, return-line

  • Flow rate:

    Min.: 0 l/min (0 us gal/min)

    Max.: 140 l/min (36.984 us gal/min)


In tractors with a mixed resp. common oil circuit for transmission and power hydraulics, a suction filter is usually used to protect the pump and a return filter to ensure the oil cleanliness. In order to protect the system during a cold start, a coarse safety screen is often also installed in the suction line. The disadvantage of this design is that the two filters in the suction line have a negative effect on the cold start performance. In addition, the use of at least two filters results in high cost for the first fit as well as the spare parts costs. By combining suction filter and return filter in one housing, the “2in1” filter from ARGO-HYTOS can improve the situation described above.

Nominal volume flow

140 l/min in the suction line
100 l/min in return line
40 l/min in tank line

Filter fineness

16 μm(c) return filter
100 μm(c) suction filter
280 μm bypass protective screen

Oil coming from the working hydraulics flows through the return filter element (1) and is directly supplied to the pumps. If the working hydraulic system feeds less oil into the return line than the pumps need to supply, the pumps draws the amount of oil needed from the tank via the suction filter element (4). The protective screen (3) prevents coarse particles from entering the system when the bypass (2) is open.

The housing of the new “2in1“filter is equipped with the Quick-Connect system. This allows quick and easy installation of the hoses to the filter housing.