video corpo cad

spool pneumatic directional control valve / pilot-operated / 3/2-way
CD series

Add to MyDirectIndustry favorites
Compare this product Don’t compare this product
spool pneumatic directional control valve spool pneumatic directional control valve - CD series
{{requestButtons}}

Characteristics

  • Type:

    spool

  • Actuating method:

    pilot-operated

  • Ports/positions:

    3/2-way

  • Operating pressure:

    Max.: 10 bar (145 psi)

    Min.: -1 bar (-13 psi)

Description

3/2-directional valve, Series CD04
3/2Qn = 900 l/min
Pilot valve width : 26 mm
NC NOPipe connection
Compressed air connection output : G 1/8
Electrical connection : Plug, EN 175301-803, form B, 3-pin
Manual override : with detent without
single solenoid
With spring return
Pilot : Internal External
Version Spool valve, positive overlapping
Activation Electrically
Sealing principle Soft sealing
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 1 mg/m³
Nominal flow Qn 900 l/min
Nominal flow 1 ▶ 2 900 l/min
Nominal flow 2 ▶ 3 900 l/min
Compressed air connection according to ISO 228-1
Pilot control exhaust with directional pilot air exhaust
Connector standard EN 175301-803:2006
Protection class with connection IP65
Compatibility index 14
Duty cycle 100 %
Technical information
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
option valve: The input and output compressed air connections can be exchanged.The valve can thereby be used in the NC or NO operating mode.
Material
Housing Die cast zinc Polyamide, fiber-glass reinforced
Seals Acrylonitrile butadiene rubber