E/P pressure regulator, Series ED02
•Qn = 120 l/min
•Compressed air connection output G 1/8, 1/8 NPT
•Electr. connection via signal connection
•Signal connection input and output, Plug, M12, 5-pin
Type Poppet valve
Mounting orientation ±α = 0 ... 90° ±β = 0 ... 90°
Certificates CE declaration of conformity
Working pressure max See table below
Ambient temperature min./max. 0 ... 50 °C
Medium temperature min./max. 0 ... 50 °C
Compressed air connection input G 1/8 1/8 NPT
Compressed air connection output G 1/8, 1/8 NPT
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 1 mg/m³
Nominal flow Qn 120 l/min
DC operating voltage 24 V
Voltage tolerance DC -20% / +20%
Permissible ripple 5%
Max. power consumption 300 mA
Protection class IP65
Weight 0,32 kg
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C .
The oil content of compressed air must remain constant during the life cycle.
Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
With oil-free, dry air, other installation positions are possible on request.
ED02 series valves can be assembled into blocks using tie rods (see accessories).
The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions.
The compressed air connection threads fit both G 1/8 and 1/8 NPTF.