• 2 AXIS VIBRATION SENSORS
• Average value output
• Cable output
General Features:
These sensors give an analog signal proportional to the vibrations on both the X and
Y axis. Since the measurement is made from a very low frequency, the gravity acceleration is not detected, so the measurement is not affected by the mounting position.
The output voltage from 0 to 5 V is proportional to the average value of the sum of
the accelerations measured on the X and Y axis.
Other outputs such as temperature and ON/OFF alarms, which are factory presetted at specific thresholds, are available upon request.
Applications:
• Alarm or feedback on the control for excessive vibrations
• Shock and collision ampitude indication
• Harmful unbalancing detection of the tool and tool holder in milling and grinding
machines.
Technical data:
• Measuring range: ± 2; ±5; ± 18 g
• Supply voltage: 8 ÷ 30 Vdc
• Power consumption: ≤ 12 mA
• Output voltage range: 0 ÷ 5 V
• Sensitivity:
- 2 g full scale: 2,5 V/g
- 5 g full scale: 1 V/g
- 18 g full scale: 0,27 V/g
• Output resistance: 100 Ω
• Frequency range: 2 ÷ 500 Hz
• Cross axis sensitivity: 1% full scale
• Shock and vibration resistance according to EN60068-2-27 EN60068-2-6
• Electromagnetic compatibility (EMC) according to EN61000-6-2/-4
Materials:
• Cable: 2 m PVC CEI 20 - 22 II; 90°C
• Housing: plastic