DC gearmotor / worm / right angle / 24V
MR 752 63 series
Gearmotor with IEC 71 B 14 flange to be assembled with standard worm screw or others.
Length "L" of the gearmotor as a funtion of reduction and output number of revolution with the standard motor
752 40 output W 2900 Rpm loadness, 12 or 24 Vdc. Starting corrent 7 A.
Drivingshaft supported by self lubrificating bushings. Output shaft supported by two coupled screened bearings.
The motor and the reduction gear are both thrated for corrosion strength.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wire 0,75 x 200 mm.
*The rotation speed can change of ±10%.
The S1 load test was made using a (1,5 A) corrent in the air with an increase of temperature of 70° C.
The S2 test was made using a (2,6 A) corrent in the air with a 50% timing 5’ with an increase of temperature
of 80° C max.
The starting corrent is (I max) and cannot be maintained for more than 2".
Max forces which may act on the output shaft: Axial 300 N, Radial 400 N on the extremity of output shaft.
Possibility to apply other motor.