Steel profile FLORENTINA

stainless steelroundtriangular

BLANKE DECO STAIR NOSING is designed to provide a decorative finish to steps while at the same time protect the edge against flaking and mechanical damage. Made of brass the classic Deco step profile harmoniously accentuates the rustic step profile. The BLANKE DECO STAIR NOSING – FLORENTINA is suitable for steps which are covered by tiles or natural stone slabs, in less heavily frequented private indoor areas. The suitability of a proposed type of material must be clarified in some cases, depending on the anti- cipated chemical, mechanical or other stress factors for the given application. Working instructions Firstly, bring the base material to the step height and apply tile ad- hesive to the edge area above the riser. Press the Blanke•Deco Stair Nosing – Florentina into the adhesive bed and align it so that the overhang edge of the profile abuts and covers the riser tile. Before laying the tile, fill the inner round cavity on the leading edge with tile adhesive. Fully trowel the triangular perforated anchoring leg and the tread area surface with tile adhesive. Press the stepping tile firmly and flush to the upper profile edge. A 2 mm joint to the profile should be left and to be filled with grout. When cleaning stainless steel, never use steel wool or steel brushes, as these can lead to unwanted abrasion and rust. Cleaning agents must be free from hy- drochloric acid and chlorine. After mortaring or bonding of the alu-minium profiles is complete, immediately clean away any mortar and adhesive residues, as these can otherwise lead to spot formation