1. Hydraulics - Pneumatics
  2. Compressor
  3. Gas blower
  4. Boreasa Technologies Co., Ltd

Small blower C54I2-05
airgascentrifugal

small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
small blower
Add to favorites
Compare this product
 

Characteristics

Type
air, gas
Technology
centrifugal
Number of stages
two-stage
Applications
for vacuum, conveying, cooling, drying, discharge, for boiler, for automobiles, for ventilation, for medical devices, cleaner, engine, for hot welding torch, air conditioning, for electrical cabinets, food, suction, for fuel cells, centrifuge, for gas, for machines, for packaging, for parts, for vehicles
Voltage / frequency
24 Vdc, 12 Vdc
Other characteristics
high-pressure, oil-free, compact, aluminum, positive pressure, pneumatic, on magnetic bearing, direct-drive, high-speed, small, variable-speed, flow control, brushless DC, three-phase, vortex
Flow

334 l/min, 372 l/min, 399 l/min, 430 l/min
(88.23 us gal/min, 98.27 us gal/min, 105.4 us gal/min, 113.59 us gal/min)

Operating pressure

5,550 Pa, 7,000 Pa, 7,938 Pa, 9,300 Pa
(0.805 psi, 1.015 psi, 1.151 psi, 1.349 psi)

Nominal power

36 W, 45 W, 52.5 W, 59 W
(0.049 hp, 0.061 hp, 0.071 hp, 0.08 hp)

Weight

200 g
(7.05 oz)

Length

54 mm
(2.13 in)

Depth

54 mm
(2.1 in)

Height

64.6 mm
(2.5 in)

Description

The C54I2-05 is a small but powerful blower capable of very high performances. Features: Dimensions: 54.0 x 54.0 x 64.6 mm (2.13 x 2.13 x 2.54 in) . At nominal voltage, the maximum pressure is in the 5'550 Pa. range and the maximum flow is higher than 280 l/mn. It can be pushed to close to 9'300 Pa. (no flow) and more than 430 l/mn (free flow). It is available in 12VDC and 24VDC.  Housing & Impeller: Medical Grade Thermo-plastics  Lead Wire: 300mm (AWG22)  Weight: 200 gr. (7.05oz)  Operational Temperature: -20 to 50 ºC / -4 to 122 ºF  Three Phase Brushless Motor without Hall Sensor  Connector: TE CONNECTIVITY (TE), CST-100 II 1375820-3  Available in 12 V on demand  Note: This blower uses a sensorless brushless motor and needs a driver to operate To maximize the reliability, all of Boreasa blowers are using brushless DC motors and are supplied with high quality dual ball bearings. An internal temperature sensor is available on most blowers for sensitive applications to ensure that the motor will not overheat. Most of the blowers described in this brochure are made of biocompatible, medical grade materials. Miniature blowers: 1. Small (diameter 54-105mm) but high performance, max pressure up to 14kpa. 2. High pressure, high speed(max up to 60000rpm). 3. High efficiency, power conversion efficiency up to 55%. 4. With internal drivers. 5. Made of biocompatible, medical grade materials 6. Long life, over 30,000 hours in bi-level mode. 7. Low noise, <29 db in home ventilators.

VIDEO

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.