Single-channel amplifier 4100 series

single-channel amplifier
single-channel amplifier
single-channel amplifier
single-channel amplifier
Add to favorites
Compare this product


signal, capacitance
Secondary function
Other characteristics
electronic, rugged, stand-alone, rack-mount, single-channel

Min.: 0 V

Max.: 10 V


4100-SC, ± 2.0% Linearity, without Meter The Basic Single channel capacitance Amplifier module is more cost effective as a stand-alone module than the standard rack and amplifier approach. The new unit has the same performance as the standard 4000 Amplifier Series but includes a built in clock/driver card embedded in a rugged aluminum enclosure. The standard analog output is 0-10VDC. The capacitance Amplifier module also includes an external AC/DC power adapter providing +5V, a 12 foot (3.66 meter) analog output cable and a 12 foot target grounding cable. Description: The 4100-SC is a self-contained signal conditioner with a built in oscillator/demodulator designed primarily for use in low volume, single point measurement applications. The 4100-SC is compatible with all new and existing Capacitec Sensor probes and Thin Film Wands. Power Requirements: +5VDC @±200mA (universal power supply included) Operating Temperature: 0-35°C Temperature Stability: -1.0mV per degree C typical (or better) Physical Dimensions: 241mm X 108mm X 32mm (9.5" X 4.25" X 1.25") Output: 0-10Vdc (+/-5 Vdc opt.); proportional to sensing gap. Includes a 10Vdc offset control. Range: Typically 100% of probe's sensor diameter or diametrical area equivalent. 2/3 of sensor diameter for best linearity Linearity: Typically ±2% of full scale or better with 2/3 range calibration. Frequency Response: 232Hz standard; 3.1KHz optional (-3dB point) Resolution: 1 mVdc


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.