Cat.8 S/FTP Lan Cable support 40GBit/s application
Per ANSI / TIA-568.2-D standard, it provides a new standard for the Category 8 network cabling solution and leads the copper twisted pair cabling into the next new era. Cat.8.1 regulation continues the RJ45 interface and is applied by shielded solution only, so far provide short-distance transmission by 30M in channel link and support 40G transmission. Cat 8 wiring scheme will be mainly used in the data center. So when building a new data center, it is recommended to use CAT.8 ethernet cable for structured cabling to meet higher bandwidth in the future. We provide the cat 8 cable bulk in 50 meters or 100 meters to meet users' demand when the assembly is needed in sites.
GHMT CAT8 channel performance verified.
Complied with the IEC61156-9 CAT8.2 cable requirement.
IEEE802.3bt PoE type III 60W and IV 100W applications.
22AWG solid copper wire, Skin-Foam-Skin Polyethylene isolation OD 1.64mm.
Aluminum foil around each pair, Tin plated copper braid for overall screen.
CM, LSZH (IEC60332-1-2 / IEC 60332-3-24) and CM-LSZH dual rated jacket are available.
Material & Structure
Conductor: Bare Copper, 22AWG 0.63mm
Insulation: Skin-Foam-Skin PE, OD 1.65mm
Foil Screen: Aluminum / PET, T=50/12 μm
Braid: Tinned Copper, 0.1mm x 6 x 16, Min. 45% Coverage
Drain Wire: N/A
Sheath: PVC CM or CMR, or LSZH, T=0.75mm, OD 8.4 ± 0.2mm
GHMT Verified Cat.8 Copper System Certification
CRXCONEC Cat.8 channel link are independently certified by reputed laboratories GHMT in Germany, based on 2 Connector channel under 30M and follow the standard of Class I ISO/IEC TR 11801-9901 Ed.1.0 (2014-08).