Intrinsically safe clock DT9100

LCDdigital4-digit

The DT9100 … Intrinsically Safe Digital Clock will accurately display local time in the hazardous area. The clock incorporate a very high accuracy crystal oscillator that ensures less than 1 minute error per year (typically) at ambient temperature between 0-40 °C. Large 4 digit, 25.4 mm height liquid crystal display make the time visible at a distance. Three different synchronisations mode are selectable in the user menu: • Remote synchronisation through an intrinsically safe digital input at DT9100 B version. • Remote synchronisation through control the 4-20 mA current loop at DT9100 I4 version: 4-10 mA current range is the normal operation mode and 14-20 mA current range is the synchronisation mode. • Local synchronisation through the front panel push buttons. The clocks has 2 isolated digital outputs, which can be used for alarm signalling. The functional parameters can be set by the front panel push-buttons, through a simple menu system: time setting, synchronisation modes, time display mode, alarm output setting, etc. The settings are protected by a two-level password against unauthorised manipulation. The instruments has two power supply versions: battery powered (DT9100 B) and intrinsically safe 4-20 mA loop powered (DT9100 I4). The DT9100 … is housed in a moulded polycarbonate case which is dust-tight and houseproof to IP 65 to allow for installation in the field or on the control panel. The internal intrinsically safe battery will power the DT9100 B clock continuously for at least three years. Replacement battery units are available (BAT).