Straight air screwdriver SENSOMAT series
with slip clutch

straight air screwdriver
straight air screwdriver
straight air screwdriver
straight air screwdriver
Add to favorites
Compare this product
 

Characteristics

Type
straight
Other characteristics
with slip clutch
Rotational speed

Max.: 2,300 rpm (14,451.3 rad.min-1)

Min.: 500 rpm (3,141.6 rad.min-1)

Torque

Max.: 5 Nm (3.69 ft.lb)

Min.: 0.3 Nm (0.22 ft.lb)

Description

The handheld pneumatic screwdriver SENSOMAT with a mechanical clutch-function is especially well suited for applications, such as • - sheet-metal assemblies • - wood assemblies • - self-drilling pass-through screws The SENSOMAT was especially designed for applications where the driving torque (thread-forming force) is close to – or even higher – than the seating torque, due to the occurring high friction during assembly. It is possible to equip this screwdriver with a mechanical clutch-lock-out, which allows the safe assembly of thread forming-, thread cutting-or self-tapping screws. This clutch-lock-out eliminates a damaging over-tightening of the screw. The SENSOMAT screwdriver assembles the screw with full motor power. Shortly before the screw is seated, the driver releases the clutch and the screwdriver shuts off at the pre-set torque. The screw is therefore fully assembled, without being stripped or otherwise damaged. The SENSOMAT, a further development of the MINIMAT screwdriver series, incorporates a highly accurate shut-off clutch that reachesa high torque-accuracy of less than ≤3 % standard deviation. DEPRAG pneumatic screwdrivers with a shut-off clutch operated at suitable surrounding conditions achieve a Cmk value of ≥1.67 with a tolerance requirement of 15 % in relation to 6 Sigma according to ISO 5393. A Cmk value of 1.67 means that there is a failure rate of only 0.6 per one million screw assemblies.

Catalogs

No catalogs are available for this product.

See all of DEPRAG SCHULZ GMBH u. CO.‘s catalogs

Other DEPRAG SCHULZ GMBH u. CO. products

Screwdriving Technology

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.