Straight air screwdriver SENSOMAT series

straight air screwdriver
straight air screwdriver
straight air screwdriver
Add to favorites
Compare this product


Other characteristics
Rotational speed

Max.: 4,000 rpm (25,132.7 rad.min-1)

Min.: 680 rpm (4,272.6 rad.min-1)


Max.: 5 Nm (3.69

Min.: 0.3 Nm (0.22


The air-operated stationary screwdrivers SENSOMAT with a mechanical clutch-function is especially well suited for applications, such as • - sheet-metal assemblies • - wood assemblies • - self-drilling pass-through screws The SENSOMAT was designed for screw assemblies where the driving-torque (thread-forming force) is close to – or even higher –than the seating torque. It is possible to equip this screwdriver with a mechanical clutch-lock-out, which allows the safe assembly of thread forming- or thread cutting screws. A damaging over-tightening of the screw is impossible. The SENSOMAT drives the screw with full motor power. Shortly before the screw bottoms out, the shut-off clutch is activated and the driver shuts-off exactly at the preset torque. The screw is completely seated without any damage to the screw-thread. Using our special designed shut-off clutch, guarantees a torque accuracy of ≤3 % standard deviation, independent from the screw joint. In many cases and under suitable conditions, it is possible to achieve an even higher torque accuracy and a Cmk value of ≥1.67 even at a tolerance of 15 % can be reached.This type of accuracy means that the error rate is below 0.6 errors per one million assemblies. To increase the processing reliability even further, it is possible to additionally control the screw-depth and the shut-off of the screwdriver.


No catalogs are available for this product.

See all of DEPRAG SCHULZ GMBH u. CO.‘s catalogs

Other DEPRAG SCHULZ GMBH u. CO. products

Screwdriving Technology

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.