Sand salt spreader orion series

HOPPER Hopper is made of S235JRG1 steel. A stainless steel version is available at request. Before painting the steel structure is cleaned to second degree of purity of the surface according to PN-H-97050. Two-stage anti-corrosion protection (thick primer epoxy paint coating and polyurethane topcoat). It is equipped with a sieve of steel bars and mobile counterweigh balancer. It may be optionally equipped with a waterproof tarpaulin and sprinkling rollers. CONVEYOR BELT Profiled conveyor belt moving on board made of plastic. Conveyor belt tension is adjusted with 2 screws. CHUTE Hot galvanized chute construction. Chute gutter and the spreading disc are made of stainless steel. Disc guard is made of polyethylene. Photoelectric spreading sensor. Raising of the chute is supported by two gas springs. The chute is automatically locked in 3 positions (work, review, transport). Spreading asymmetry regulated by an electric cylinder. CONTROL AND HYDRAULICS Bosch Rexroth hydraulic electric cylinders package. Control of the spreader is conducted from the driver’s cabin. The spreader can work in two control systems -STANDARD and COMFORT. In the STANDARD system dosing of spread materials and the brine is adjusted by the driver. In the COMFORT system, after selection of the road condition, the spreader itself choices the amount of spread material on the basis of road temperature measured by temperature sensor. In both systems, the selected material discharge is set in relation to the vehicle’s speed. The pulses are read from the tachograph or from GPS. Controlling the diesel engine of the driver of the spreader is from the same desktop as the spreader.