Air filter cartridge ECOPLAST-PE-G

gasdepthpolyethylene

Filter elements Ecoplast-PE intended for removal of gaseous media particles larger than 1 micron and aerosols at temperatures from -60 to + 100°C. Construction and materials The filter material is a two- or three-ply porous hollow cylinder 250 mm in height, in which the total porosity and average pore size decreases from the inner to the outer layers. The layers are formed from powders of different dispersion of ultra-high molecular weight polyethylene (UHMWPE, TU 2211-001-98386801). Thermal bonding of powders occurs during sintering product in the mold. Elements of any height can be manufactured as a dead end form, and the straight form. Elements 500, 750 or 1000 mm was prepared by welding two, three or four elements of a height of 250 mm through a transition piece. End and transition parts of elements made monolithic from polypropylene and hermetically welded to the ends of the filter material. Efficiency of retention of the particles - at least 99% at the stated rating and the recommended gas flow rate. By agreement with the customer can be made single-layer filter elements or filter elements with a combination of other layers General Information The high thermochemical resistance enables the use of elements Ekoplast-PE for the filtration of corrosive gases at temperatures from -60 to + 100 ° C, as well as long service life due to the possibility of chemical recovery.