Electric screwdriver control unit eTensil TPU-M1

For eTensil, electric tightening solutions with automatic shut off by mechanical clutch. Provides the tools with the correct power supply, but also features a large number of very useful functions that can be programmed quickly, easily and intuitively. Here are some of them: essentials to monitoring a tightening process correctly. - - It automatically recognizes the tool connected and configures themselves immediately to its parameters, so operators cannot make initial setup errors - - Displays the tightening outcome OK/NOK together with the tightening time - - Screws counting: turning the process into a powerful Poka Yoke method - - It detects process anomalies, for example stripped threads or screws already tightened - - Store up to 99 tightening operations, which can then be sent for data collection to calculate process statistics - - It communicates with the outside, the PLC or other devices, and can be controlled remotely - - It solves tightening situations with critical joints, for example with flexible gaskets, or components made of rubber or other materials, as they verify that such gaskets are in place during assembly. “Smart Pro Evo” programming also provides - - parametrisation of the tool tightening speed to make it easier to feed screws or set the tool speed. - - for electrical/electronic field, for example when inserting wires into connectors that must be untightened and then tightened again, is the option of setting the untightening angle and pause time between untightening and the subsequent tightening. - - Threaded components can also be tightened with height-based rather than torque-based shut-off. Entirely designed and built by Fiam.