Hydraulic shear JAK-200TC

JAK-200TC TREE SHEAR Recommended under 6,5 meter (21,3 ft) cranes (15-40 kNm) The 200TC multifunction tree shear is equipped collector/accumulation unit and it makes smaller trees harvesting about twice efficient. JAK-200TC collector makes tree clearing efficient Even this model is equipped with a collector it can delimb, cut, and load easily, thanks to its agile and versatile movements. This 200TC model is made for harvesting energy wood, clean up field sides and roadside areas, and different kinds of environmental works. The even bigger area is cleared quickly. Smaller trees are possible to take so many than cutting capacity to give up. Just cut the first one and open and after that take the next one and next one etc. after the cutting capacity is full, just put the whole bush to the loading area or fall down direct to the trailer. Even this 200 TC model is equipped with collector delimbing is possible anyhow. Before cutting, a standing tree can be delimbed by lifting with a crane. delimbing blades cut branches off. After delimbing jaws take tight hold of the trunk and the hydraulic cutting blades cut the tree neatly and efficiently. After cutting the top of the tree stay still vertical position if wanted and it is an easy to move to the loading area or fell tree direct to the trailer. Base machines: small harvesters, small forwarders, example Alstor, Kinetic, Usewood, Logbullet, etc, forest trailers with under 6,5m (21,3 ft) crane and small excavators 1,5 – 3t (3306 – 6613 lbs).