Flakes ice production machine IFM series

DESCRIPTION With stainless steel body, and receding door for easier access to the ice, it adopts an innovative concept in internal mechanics: reduction unit placed on the top of the evaporator. Self-standing single-body structure foamed with polyurethane resin. Ice flakes are produced in a vertical cylinder in the container/reservoir driven through a neverending screw. Airtight compressor and HFC (R404-a) refrigerant. Light signalling operation or lack of utility water. Safety thermostst that stops ice production when the container’s maximum storage level is reached. Possibility of air or water condensation. In this last case, hourly production is estimated at 10% higher than the standard values. Entirely made from stainless steel, with receding door for easier access to the ice, and featuring an innovative concept in internal mechanics, namely the reduction unit placed in the upper section of the evaporator. The self-standing, single-body structure is foamed with polyurethane resins. Granular flaked ice is produced in a vertical cylinder and conveyed to the container/reservoir by means of an endless screw. Airtight compressor and environment-friendly HFC refrigerant. Pilot lights indicate operation and lack of utility water. A safety thermostat stops ice production when the container reaches maximum storage capacity. Possibility of air or water condensation. In the latter case, hourly production is estimated to be 10% above standard. High yield ice production system. The environment-friendly refrigerant gas is expanded directly inside a sturdy steel cylinder. Airtight compressor and environment-friendly refrigerant.