Eccentric screw pump B70V-SR Pure
for chemicalsfor food productselectric

eccentric screw pump
eccentric screw pump
Add to favorites
Compare this product


for chemicals, for food products
eccentric screw
for the food and beverage industry, for pharmaceutical applications, for the cosmetics industry, sanitary
transfer, drum, drain
stainless steel
Fluid specification
for abrasive fluids, for viscous fluids, for high-viscosity fluids
230 V
Other characteristics
with mechanical seals, with gear reducer

Min.: 0 l/min (0 us gal/min)

Max.: 12 l/min (3.17006 us gal/min)

Fluid temperature

140 °C (284 °F)

Input diameter

54 mm (2.1 in)


The Eccentric screw pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various electric and air motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. • also available in special immersion depths • Pump tube equipped with Lutz Original handwheel • Media examples: viscous cosmetic products, food and etc. Features & Advantages • Uniform volume flow • Easy and quick cleaning • Gentle, low-pulsation product delivery • Low wear • Ideal for mobile use • Approved according to ATEX Directive 2014/34/EU, Category 1/2 * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.‌The viscosity values are determined with oil.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.