integrated-drive servomotor / three-phase / DC / brushless
DBS series

{{requestButtons}}

Characteristics

  • AC/DC:

    three-phase, DC

  • Type:

    brushless

  • Voltage :

    48V, 24V

  • Other characteristics:

    CANopen, EtherCAT, 4-pole, permanent magnet, integrated-drive, IP65

  • Torque:

    0.75 Nm (0.5532 ft.lb)

  • Power:

    Max.: 250 W (0.34 hp)

    Min.: 125 W (0.17 hp)

  • Rotational speed:

    3,000 rpm (18,849.56 rad.min-1)

Description

EN: Brushless servomotors with integrated drive. Power from 125 to 250 W
USA: Brushless servomotors with integrated drive. Power from 1/6 to 1/3 HP
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
Rated torque up to 0.75 Nm.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 16bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.