Printing Technology – FFF (Fused Filament Fabrication)
Number of print heads – single or dual (optional)
Delivery – Self assembly kit. Assembly guide include easy to follow videos and online 3D models that could be rotated and zoomed.
Big-120X – 1200 X 600 X 660 mm (XYZ)
Big-120- 1556 X 1025 X 1356 mm (W x D x H)
* not including filament spools on the left side
Big-120X- 160 kg
* Including packaging, enclosure and 2nd print head
•7inch Duet3d touch screen – integrated with the controller
•Wifi web access for remote control from either mobile or PC
allowing uploading print files directly from your workstation.
•SD card and USB.
•Hiwin MGW12H linear guides rails
•4 X Z ball nut screws for Z axis 16mm diameter, 4mm pitch
•9 mm width Gates GT2 timing belt, fiber glass reinforced.
•Axis Motors: Motech Nema 17 60mm length MT-1705HS200A
| Holding Torque: 114oz.in (8.2kg.cm) | Current / Phase: 2.00A |
•Position accuracy: X-10 Micron, Y-10 Micron, Z-0.5 Micron.
•Print speed – Normal quality 60 mm/sec, Draft 100 mm/sec
Calculated for 0.4 nozzle. Larger nozzles normally print slower but providing parts much faster due to reduced amount of layers (thicker layer = lower resolution = faster results).
•Supporting both 110V and 230V
•For electronics: – Meanwell 24V 280W Power Supply
•Protections: Short / Overload / Over voltage / Over temp.
•No load power consumption<0.5W
•LED indicator for power on
•Aviation grade switches and connectors
•Heat Bed AC powered heater 1600Watt
•Autonic PID bed heater controller