Plastic crystallizer CPK Crystalliser

For continuous crystallisation of amorphous materials such as PET and PLA. With respect to costs and efficiency, recycling becomes more and more important. In order to avoid clumping of recycled PET material during drying up to 180 °C, crystallisers of the CPK and KT series should be used before the drying process. The agitator bins are equipped with a high-performance drive motor. The amorphous material in the bin is kept in motion at a controlled temperature until crystallisation is concluded and further processing can then continue. For continuous crystallisation of amorphous materials such as PET and PLA. With respect to costs and efficiency, recycling becomes more and more important. In order to avoid clumping of PET recycled material during drying with up to 180 °C, crystallisers of the CPK and KT series should be used before the drying process. The agitator bins are equipped with a high-performance drive motor. The amorphous material in the bin is kept in motion at a controlled temperature until crystallisation is concluded and further processing can then continue. YOUR BENEFITS •Optimised crystallising process By crystallising in an open circuit,it is possible to reduce hydrolytic degradation. An additional benefit is that the material is pre-dried. An optional heat exchanger can be fitted which offers considerable energy savings. •Constant drying quality When dropping below a minimum exhaust temperature as a result of excessive material throughput, the amount of material discharged is controlled so that optimum drying quality is always maintained.