Relay parts ACTE3CH2A05V

Protective Construction - Sealed Coil Resistance (at 20oC) - 160Ω Heat Resistance of Types - High heat-resistant type Contact Arrangement - 1 Form C x 2 (8 pins) Contact Type - Standard type (Ag alloy / Cu clad) Terminal Type - PC board type Operating Function - Single side stable Rated Coil Voltage - 12V DC Operate (Set) Voltage (at20°C) (Initial) - Max. 6.5V DC Coil Resistance (At 20oC) - 160Ω Rated Operating Power - 900 mW Usable Voltage Range - 10 to 16V DC Contact Resistance (Initial) - Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) Contact Material - Ag alloy Nominal Switching Capacity (Resistive Load) - N.O. side: 20A 14V DC, N.C. side: 10A 14V DC Min. Switching Load (Resistive) - 1A 14V DC (at 20°C 68°F) Contact Data: Max. Carrying Current - 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) Insulation Resistance (Min. MΩ)(Initial) - Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) Dielectric Strength (Between Open Contacts) (Initial) - 500 Vrms for 1 min. (Detection current: 10mA) Dielectric Strength (Between Contacts and Coil) (Initial) - 500 Vrms for 1 min. (Detection current: 10mA) Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial) - Max. 10ms (without contact bounce time) Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial) - Max. 10ms (Without contact bounce time) (Without diode) Shock Resistance: Functional - Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) Shock Resistance: Destructive - Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)