video corpo
cad

Spool pneumatic directional control valve 468 series
pneumatically-operatedsolenoid-operated3/2-way

spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
spool pneumatic directional control valve
Add to favorites
Compare this product
 

Characteristics

Type
spool
Actuating method
pneumatically-operated, solenoid-operated
Ports/positions
3/2-way, 5/2-way, 5/3-way
Other characteristics
normally open
Flow rate

410 l/min, 540 l/min, 620 l/min (108 us gal/min)

Operating pressure

Min.: 0 bar (0 psi)

Max.: 10 bar (145 psi)

Description

These are 2 stage valves actuated electro-pneumatically. A serie 300 directly operated solenoid valve actuates pneumatically the principal power distributor. SOLENOID VALVES 3/2, 5/2, 5/3 G1/8″ General These are 2 stage valves actuated electro-pneumatically. A sérié 300 directly operated solenoid valve actuates pneumatically the principal power distributor. This integrated System allows configurations of Systems requiring very little space. The pilot air is normally taken from the inlet port (autofeed) and the only actuating signal is electric. The range of the solenoid valves, as far as dimensions and mechanical construction, is similar to sériés 200. We hâve therefore solenoid valves G 1/8", G 1/4", G 1/2" and G 1" with identical pneumatic characteristics that are, however, actuated electrically. They hâve a balanced spool, insentive to presence or absence of pressure. They are constructed in 3 and 5 way with 1 solenoid (monostable) or 2 solenoids (bistable) and also 5 ways 3 positions with closed centres, open centres and pressured centres. If should be noted that the autofeed of the electric pilot requires always inlet through port 1 and if a 3 ways normally open configuration is desired, it is necessary to switch the operators. In the tables showing individual valves, the quick reference tables show the output in Nl/min at a inlet pressure of 6 bar and a pressure drop of 1 bar. AN information was obtained using standards CETOP RP 50R Solenoid valves G118" and G1 /4" can be equipped with microsolenoids as well as standard solenoids and they can be mounted in line or in 90 degrees on distributors.

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.