The range of pneumatic displacement pump plastic is shown TFG400 polypropylen or PVDF according to the type of fluid to be pumped: for the acidic or basic fluids, or diluted standard is a technical solution polypropylen economic for fluids not compatible with one polypropylen choose the PVDF eg pumping nitric acid or bleach.
The range of air-operated diaphragm pump is the smallest TFG400 large pumps: relatively compact and is easily transportable by one perconne: capacitée but its pumping is exceptional for a pump of this size, it is chosen in all case or need debit importantly requie together with a small footprint
Maximum fluid pressure 8.4b
Maximum free flow 378.5l/mn
Maximum speed of the pneumatic pump 200cycles/mn
Speed cycle pump membranes 1.96l
Maximum suction pump volumetric 6.1ma empty
Maximum particle size of the solids pump 4.8mm
* The flow pumps are with muffler and do not vary with the matter of the membrane.
**The flow per cycle may vary based on suction condition of the pump, discharge head, air pressure and the type of product.
*** The actual performance of a pneumatic pump can undergoing any prolonged use of these temperature.
- Peristaltic pumps range
As you can see from the curve the rate of flow is inversely proportional to the pressure: with the discharge port closed and the maximum air pressure fluid flow is obviously al / min and pressure of the fluid is maximum 8.3b:
compressing airin the air chamber is at the same pressure as the fluid in the chamber fluid side.
TECHNI-FLOW PNEUMATIC PUMP
WEIGHT:
Air pump 16kg Polypropylene
Polypropylene diaphragm pump with stainless steel center section 21.9kg
PVDF pump 22KG