PROTECH WASHING CABINET FOR SMOKE TROLLEYS
The cabinet is designed for washing and rinsing of smoke trolleys.
The capacity- size of chamber is 2-6 trolleys/cycle.
The cabinet is designed for washing and rinsing of smoke trolleys with dimension
1 x 1 x 2 m, but can be adapted for other trolleys. Washing is done by spraying an alkaline cleaning liquid (NaOH) from horizontal movable pipes. The cleaning liquid can be heated up to 500C – 600C. Rinsing is done with cold water.
The chamber is manufactured of modules which are fully welded together in such a way that a complete hermetic construction is obtained. The unit is insulated with an 80 mm thick layer of isolation. The panels are made of stainless steel sheet, 1.5 mm thick, quality AISI 304.
A drain in the bottom with 2 pumps sends the cleaning liquid return to a tank where dirt is filter out. The cleaning liquid is heated in the tank ready to be used again.
Cleaning fluid is sprayed on the racks via horizontal cleaning ramp moving inside the chamber along its length. The ramp is provided with special nozzles in stainless steel and is driven by a gear motor through a system of chains. The ramp and associated nozzles go in different levels so all parts of the racks should be treated. A powerful centrifugal pump sucks the cleaning liquid from the tank and sends it through nozzles under high pressure.
The water is heated with steam or electricity. Temperature is regulated by a thermostat.
DISINFECTION OF THE SMOKE TROLLEYS
The smoke trolleys can be disinfected by direct injected steam into the cabinet. A temperature of 800C or higher can be achieved.