Locking device coupling RfN 7515
gearfor shaftstransmission

locking device coupling
locking device coupling
locking device coupling
Add to favorites
Compare this product
 

Characteristics

Type
locking device, gear
Product applications
transmission, for shafts
Other characteristics
torque
Installation system
flange
Torque

Min.: 4,299 Nm
(3,170.7797 ft.lb)

Max.: 1,300,152 Nm
(958,942.9035 ft.lb)

Description

Especially for the bending moment transmission designed 3 part Locking Assembly with reduced stresses in the Locking Assembly itself. Available in sizes 60 to 640 mm. Product Characteristics Precision Locking Assembly for transmission of torques, axial forces and special optimised for the transmission of bending moments, with special requirements to the true running of the clamped pieces. Special features - Through the long and flat cones one Locking Assembly RfN 7515 can transmit torques and axial forces and bending loads. During mounting occurs a slight axial movement from Locking Assembly and hub. Bending moment and radial loads – combined loads can be transmitted (Please contact our technical department for assistance). Excellent centering ability – with a relatively wide design. Example applications: belt drums gear wheels Mounting of Locking Assembly The values for T, Fax, pW and pN apply to Locking Assemblies installed in oiled condition. Surface finishes For shafts and hub bores Ra ≤ 1,6 μm Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.