Wire end ferrules crimping machine PEC 40

automatic

Control cabinet construction is the perfect field of application for the PEC 40 crimping station. The PEC 40 is designed for conductor cross sections from 0.5 up to 4.0 mm² and for lengths of 6, 8, 10 and 12 mm. Optimum crimping results are achieved by adjusting the crimp force to the specific cross section. With a cycle time of less than 1 second the PEC 40 provides unparalleled performance. All interchange parts can be exchanged without the use of tools, providing for extremely short changeover times of less than 2 minutes. Color coding on the change parts correspond with the ferrule’s standard colors, simplifying the setup. - Square crimping provides for optimum contact surfaces in the clamp connection. - Ferrule detection (no ferrule, no crimp) - Automatic crimp-force adjustment to the specific cross section for consistently high-quality crimping results - Maximum precision through electric drives - Crimp monitoring through software-based pressure and crimp-lever stroke monitoring - Pull-off forces exceeding standard (4 to 5 times higher than DIN EN60999-1) The PEC 40 crimping station can be seamlessly integrated into the Schleuniger CrimpCenter 6 Series. This enables easy operation via the HMI and conveniently provides all relevant manufacturing parameters. The ferrules are displayed in the HMI according to their respective standard color. The color of the protective collar indicates the maximum conductor cross section in each case, making it easier for the operator to visually check the production orders.