INFORMATION
The fully automated lens cleaner, LCU 120, effectively cleans large volumes of lenses in a very small footprint. Depending on the requirements, the brush cleaner is available in two versions. The basic version is designed specifically for cleaning the backside of frontside coated lenses. The extended version cleans the frontside as well as the backside.
The lenses are automatically transferred through the multi-step process. Rotating brushes clean the lenses gently and without damage. The special brush-to-lens arrangement immediately casts off the dirt particles, so they can’t scratch the sensitive lens surface. Contaminations like adhesive residues or fingerprints are efficiently removed.
Finally, the lenses are rinsed with DI water, before they are dried and transferred back to the tray.
Connected to the SCHNEIDER Control Center, the brush cleaner is subject to continuous process monitoring.
LCU 120 is the perfect solution for midsized and large labs that value fast but high-quality cleaning results – ready for subsequent coating processes.
BENEFITS
Fully automated cleaning process
Excellent cleaning results
100 – 120 lenses per hour
No pretreatment or precleaning required
Small footprint combined with high efficiency
Low total cost of ownership
Short ROI periods
TECHNICAL DATA
lens diameter:
from 45 to 80 mm
lens material:
all common materials
power consumption:
9.6 kVA avg., rated current 20 A, pre fuse 32 A
air requirement:
min. 6 bar (87 psi), oilfree
water requirement:
DI-water, conductivity < 10 μS/cm
machine weight:
approx. 420 kg (926 lb.)
dimensions (width x depth x height):
approx. 1200 x 2000 x 2105 mm (48 x 79 x 83 inches)