process gas analyzer / continuous / extractive / infrared



  • Measured entity:

    process gas

  • Other characteristics:

    continuous, extractive, infrared


Best combination for IR-active components and oxygen

The ULTRAMAT/OXYMAT 6 combines the features of the ULTRAMAT 6 and the OXYMAT 6 in one 19" analyzer. Most frequently used for demanding applications, the ULTRAMAT/OXYMAT 6 must meet high standards with regard to reliability and measurement quality. This is guaranteed by state-of-the-art electronics, ease of operation, and a physical element that is adapted to the measurement task.

Increasing Selectivity

Up to two infrared-active components and oxygen can be measured in one device. The use of optical couplers and optical filters in the IR physics leads to an increase in selectivity and in many cases also enables the measurement in complex gas mixtures. This ensures measurements of low concentrations as well as low detection limits. The OXYMAT physics is based on measuring oxygen using the paramagnetic alternating pressure method. This ensures absolute linearity and allows parameterization of smallest measuring ranges from 0 to 0.5% (detection limit 50 ppm) up to 0 to 100% in one device.

Benefits at a glance

Corrosion-resistant materials in the gas channel (optional): Measurement possible in highly corrosive measuring gases
Cleanable measuring chambers: Cost savings thanks to further use in case of contamination
Open interface architecture (RS 485, RS 232, PROFIBUS)
SIPROM GA network for maintenance and service information (optional)